[Sun Jul 29 19:56:37 2012] Detection parameters:
  Position = (159.7, 268.1) = 3 7 3.93 -9 45 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.1 +/- 10.8
  Background counts = 26.5
  Rate = 0.001 +/- 0.0003

[Sun Jul 29 19:56:37 2012] Off-axis axis estimate = 10.30'
[Sun Jul 29 23:15:35 2012] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 23:15:35 2012] Initial guess for spatial extent in simple fitting = 11.58"
[Sun Jul 29 23:15:35 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.900
[Sun Jul 29 23:15:35 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 11.58"
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src49.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src49.csv
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src49.csv
[Mon Jul 30 01:38:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:38:53 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon Jul 30 01:38:53 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Jul 30 01:38:53 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Mon Jul 30 01:39:28 2012] Spatial fit model total counts = 328.693000, observed total counts = 328.000000
[Mon Jul 30 01:39:28 2012] Offset between fit and detection position for source 57 = 4.144013 pixels
[Mon Jul 30 01:39:28 2012] 325.737000 total counts/ 191.598000 bgd. counts: snr = 9.690799
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 4.144013 pixels
  Position = (163.4, 266.3) = 3 7 2.83 -9 45 7.5
  Extent = 23.2 (23.1-46.3)", rotation angle = 0
  Source counts = 134.1 +/- 18.0
  Background counts = 191.6
  Rate = 0.002 +/- 0.0003
[Mon Jul 30 01:39:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:28 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 01:39:28 2012] Source does appear to be extended
[Mon Jul 30 01:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:39:28 2012] Source is confused with source 58
[Mon Jul 30 04:32:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 30 04:32:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 30 04:32:11 2012] Initial guess for spatial extent in simple fitting = 23.16"
[Mon Jul 30 04:32:11 2012] source mask rpix=5.3, npix_max = 135, mask sum = 121, frac = 0.892
[Mon Jul 30 04:32:11 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 23.16"
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src47.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src47.csv
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src47_1.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src47.csv
[Mon Jul 30 07:12:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Mon Jul 30 07:12:23 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Mon Jul 30 07:13:03 2012] Source 57 is offset by -5.459862 and 7.030736 pixels which is larger than
2 X fitted extent = 2.661595 x 2.661595, not incorporating fit results
[Mon Jul 30 07:13:04 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:13:04 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 07:13:04 2012] Source does appear to be extended
[Mon Jul 30 07:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 12:30:41 2012] XMMSAS src. selection expression = ellipse(14168.752000, 23123.638000, 1389.354040, 1389.354040, 0.000000, X, Y)
[Mon Jul 30 12:30:41 2012] Writing source region out to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src57_src.reg
[Mon Jul 30 12:30:41 2012] Extracting stamp from image fullrun_mos2_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (84, 186) - (243, 346)
[Mon Jul 30 12:30:41 2012] XMMSAS bgd. selection expression = annulus(14168.752000, 23123.638000, 2315.590067, 4631.180133, X, Y) && !ellipse(14646.617380, 22499.794800, 382.989611, 382.989611, 0.000000, X, Y) && !ellipse(9148.302300, 23993.791200, 578.920017, 578.920017, 0.000000, X, Y) && !ellipse(15667.158200, 23606.793620, 427.225612, 427.225612, 0.000000, X, Y) && !ellipse(14930.567291, 20001.058609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16245.798499, 19930.156808, 826.133621, 601.914611, 289.055868, X, Y) && !ellipse(9134.738564, 18360.516006, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 12:30:41 2012] Writing fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src57.gif
[Mon Jul 30 12:55:21 2012] Mean detx,y = (-9012.96, 4729.56) 
[Mon Jul 30 12:55:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 12:56:36 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 12:56:36 2012] Setting source spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon Jul 30 12:56:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Mon Jul 30 13:49:50 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:50 2012] Error reading totcts from fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon Jul 30 13:49:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:53 2012] Using photon index=1.80, rate=0.00203, arf fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src57.arf
[Mon Jul 30 13:49:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:53 2012] Updating source flux to 3.1e-14
[Mon Jul 30 13:51:52 2012] Flag b found in src. 57 procflags, skipping spectral fitting
[Mon Jul 30 13:51:52 2012] Flag c found in src. 57 procflags, skipping spectral fitting