[Sun Jul 29 19:56:37 2012] Detection parameters:
  Position = (273.6, 294.2) = 3 6 30.39 -9 43 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.8 +/- 17.6
  Background counts = 40.2
  Rate = 0.002 +/- 0.0003

[Sun Jul 29 19:56:37 2012] Off-axis axis estimate = 1.82'
[Sun Jul 29 23:15:35 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 23:15:35 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun Jul 29 23:15:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.679
[Sun Jul 29 23:15:35 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.34"
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src33.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src33.csv
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src33.csv
[Mon Jul 30 01:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon Jul 30 01:38:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:39:28 2012] Warning, spatial fit 33 centroid is now closest to src. 55
[Mon Jul 30 01:39:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:28 2012] Assessing source extent using major
[Mon Jul 30 01:39:28 2012] Source does appear to be extended
[Mon Jul 30 01:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:39:28 2012] Source is confused with source 29
[Mon Jul 30 04:32:11 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 04:32:11 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Mon Jul 30 04:32:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.679
[Mon Jul 30 04:32:11 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 7.34"
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src32.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src32.csv
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src32_1.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src32.csv
[Mon Jul 30 07:12:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Mon Jul 30 07:12:23 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Mon Jul 30 07:13:03 2012] Warning, spatial fit 32 centroid is now closest to src. 29
[Mon Jul 30 07:13:03 2012] Spatial fit model total counts = 841.265000, observed total counts = 755.000000
[Mon Jul 30 07:13:03 2012] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 30 07:13:04 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:13:04 2012] Assessing source extent using major
[Mon Jul 30 07:13:04 2012] Source does appear to be extended
[Mon Jul 30 07:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 12:30:40 2012] XMMSAS src. selection expression = ellipse(23758.696350, 25548.618866, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 12:30:40 2012] Writing source region out to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src50_src.reg
[Mon Jul 30 12:30:40 2012] Extracting stamp from image fullrun_mos2_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (236, 257) - (311, 332)
[Mon Jul 30 12:30:40 2012] XMMSAS bgd. selection expression = annulus(23758.696350, 25548.618866, 1087.500000, 2175.000000, X, Y) && !ellipse(24338.324600, 24601.477000, 819.208024, 819.208024, 0.000000, X, Y) && !ellipse(22560.159720, 26956.511800, 403.718412, 403.718412, 0.000000, X, Y) && !ellipse(25686.513980, 24332.532200, 311.711209, 311.711209, 0.000000, X, Y) && !ellipse(23571.994690, 25098.809113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23479.525330, 24606.757843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23458.426760, 27413.846600, 281.749608, 281.749608, 0.000000, X, Y) && !ellipse(22087.810745, 24583.531647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22951.700195, 24926.818970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24606.022400, 25944.252747, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 12:30:40 2012] Writing fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src50.gif
[Mon Jul 30 12:49:28 2012] Mean detx,y = (-638.56, -488.74) 
[Mon Jul 30 12:49:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 12:49:45 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 12:49:45 2012] Setting source spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jul 30 12:49:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Mon Jul 30 13:30:35 2012] Not generating rmf since there are only 92 counts
[Mon Jul 30 13:30:35 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:49 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:49 2012] Error reading totcts from fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jul 30 13:49:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:53 2012] Using photon index=1.80, rate=0.00172, arf fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src50.arf
[Mon Jul 30 13:49:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:53 2012] Updating source flux to 2e-14
[Mon Jul 30 13:51:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting