[Sun Jul 29 19:56:36 2012] Detection parameters:
  Position = (370.8, 324.3) = 3 6 1.82 -9 40 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.7 +/- 12.8
  Background counts = 28.5
  Rate = 0.001 +/- 0.0002

[Sun Jul 29 19:56:37 2012] Off-axis axis estimate = 5.57'
[Sun Jul 29 23:15:35 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 23:15:35 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Sun Jul 29 23:15:35 2012] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.547
[Sun Jul 29 23:15:35 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 9.21"
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src42.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src42.csv
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src42_1.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src42.csv
[Mon Jul 30 01:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Mon Jul 30 01:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon Jul 30 01:38:53 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Mon Jul 30 01:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon Jul 30 01:38:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:39:28 2012] Source 46 is offset by 2.763544 and 8.281763 pixels which is larger than
2 X fitted extent = 0.998869 x 0.998869, not incorporating fit results
[Mon Jul 30 01:39:28 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 12.672442 pixels away
[Mon Jul 30 01:39:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:28 2012] Assessing source extent using major
[Mon Jul 30 01:39:28 2012] Source does appear to be extended
[Mon Jul 30 01:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 04:32:11 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 04:32:11 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Mon Jul 30 04:32:11 2012] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.547
[Mon Jul 30 04:32:11 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 9.21"
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src41.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src41.csv
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src41_1.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src41.csv
[Mon Jul 30 07:12:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Mon Jul 30 07:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src41.csv
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Mon Jul 30 07:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src41.csv
[Mon Jul 30 07:12:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:13:03 2012] Warning, spatial fit 41 centroid is now closest to src. 14
[Mon Jul 30 07:13:04 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:13:04 2012] Assessing source extent using major
[Mon Jul 30 07:13:04 2012] Source does appear to be extended
[Mon Jul 30 07:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 12:30:40 2012] XMMSAS src. selection expression = ellipse(32207.140289, 28163.225342, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 12:30:40 2012] Writing source region out to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src46_src.reg
[Mon Jul 30 12:30:40 2012] Extracting stamp from image fullrun_mos2_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (333, 287) - (408, 362)
[Mon Jul 30 12:30:40 2012] XMMSAS bgd. selection expression = annulus(32207.140289, 28163.225342, 1087.500000, 2175.000000, X, Y) && !ellipse(31280.110260, 26741.353607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29799.104400, 31251.570000, 1145.168033, 1145.168033, 0.000000, X, Y)
[Mon Jul 30 12:30:40 2012] Writing fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src46.gif
[Mon Jul 30 12:52:54 2012] Mean detx,y = (6431.85, -5759.00) 
[Mon Jul 30 12:52:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 12:53:21 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 12:53:21 2012] Setting source spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon Jul 30 12:53:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Mon Jul 30 13:31:35 2012] Not generating rmf since there are only 96 counts
[Mon Jul 30 13:31:35 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:50 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:50 2012] Error reading totcts from fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon Jul 30 13:49:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:53 2012] Using photon index=1.80, rate=0.00146, arf fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src46.arf
[Mon Jul 30 13:49:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:53 2012] Updating source flux to 3.9e-14
[Mon Jul 30 13:51:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting