[Sun Jul 29 19:56:36 2012] Detection parameters:
  Position = (204.2, 325.9) = 3 6 50.81 -9 40 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.5 +/- 11.2
  Background counts = 29.9
  Rate = 0.001 +/- 0.0002

[Sun Jul 29 19:56:37 2012] Off-axis axis estimate = 7.11'
[Sun Jul 29 23:15:35 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 23:15:35 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Sun Jul 29 23:15:35 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.152
[Sun Jul 29 23:15:35 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 9.99"
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src56.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src56.csv
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src56_1.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src56.csv
[Mon Jul 30 01:38:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:38:54 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Mon Jul 30 01:38:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src56.csv
[Mon Jul 30 01:38:54 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Mon Jul 30 01:38:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src56.csv
[Mon Jul 30 01:38:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:39:28 2012] Source 45 is offset by -8.494317 and 3.584829 pixels which is larger than
2 X fitted extent = 1.160258 x 1.160258, not incorporating fit results
[Mon Jul 30 01:39:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:28 2012] Assessing source extent using major
[Mon Jul 30 01:39:28 2012] Source does appear to be extended
[Mon Jul 30 01:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 04:32:11 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 04:32:11 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Mon Jul 30 04:32:11 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.152
[Mon Jul 30 04:32:11 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 9.99"
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src53.ximg exists
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src53_1.ximg exists
[Mon Jul 30 07:12:22 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src53 appears to have run properly
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Mon Jul 30 07:12:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Mon Jul 30 07:12:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Jul 30 07:12:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:13:03 2012] Spatial fit model total counts = 460.864000, observed total counts = 454.000000
[Mon Jul 30 07:13:03 2012] Offset between fit and detection position for source 45 = 0.220990 pixels
[Mon Jul 30 07:13:03 2012] 453.940800 total counts/ 425.316000 bgd. counts: snr = 1.387991
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.220990 pixels
  Position = (204.1, 326.1) = 3 6 50.86 -9 40 47.9
  Extent = 3.5" x 2.5", rotation angle = 38
  Source counts = 28.6 +/- 21.3
  Background counts = 425.3
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability