[Sun Jul 29 19:56:36 2012] Detection parameters:
  Position = (165.2, 342.5) = 3 7 2.29 -9 39 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.0 +/- 11.2
  Background counts = 26.6
  Rate = 0.001 +/- 0.0003

[Sun Jul 29 19:56:37 2012] Off-axis axis estimate = 10.17'
[Sun Jul 29 23:15:35 2012] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 23:15:35 2012] Initial guess for spatial extent in simple fitting = 11.51"
[Sun Jul 29 23:15:35 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.060
[Sun Jul 29 23:15:35 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 11.51"
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src45.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src45.csv
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src45_1.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src45.csv
[Mon Jul 30 01:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:38:53 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Mon Jul 30 01:38:53 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Mon Jul 30 01:38:53 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Mon Jul 30 01:39:28 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 15.500465 pixels away
[Mon Jul 30 01:39:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:28 2012] Assessing source extent using major
[Mon Jul 30 01:39:28 2012] Source does appear to be extended
[Mon Jul 30 01:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 04:32:11 2012] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 04:32:11 2012] Initial guess for spatial extent in simple fitting = 11.51"
[Mon Jul 30 04:32:11 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.060
[Mon Jul 30 04:32:11 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 11.51"
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src44.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src44.csv
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src44_1.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src44.csv
[Mon Jul 30 07:12:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Mon Jul 30 07:12:23 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Mon Jul 30 07:13:03 2012] Source 42 is offset by -0.047880 and 9.951726 pixels which is larger than
2 X fitted extent = 1.323536 x 1.323536, not incorporating fit results
[Mon Jul 30 07:13:04 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:13:04 2012] Assessing source extent using major
[Mon Jul 30 07:13:04 2012] Source does appear to be extended
[Mon Jul 30 07:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 12:30:40 2012] XMMSAS src. selection expression = ellipse(14325.571075, 29746.990143, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 12:30:40 2012] Writing source region out to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src42_src.reg
[Mon Jul 30 12:30:40 2012] Extracting stamp from image fullrun_mos2_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (128, 305) - (203, 380)
[Mon Jul 30 12:30:40 2012] XMMSAS bgd. selection expression = annulus(14325.571075, 29746.990143, 1087.500000, 2175.000000, X, Y) && !ellipse(15085.127167, 30805.061798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16440.657684, 31917.912018, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 12:30:40 2012] Writing fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src42.gif
[Mon Jul 30 12:54:08 2012] Mean detx,y = (-11014.94, -1652.52) 
[Mon Jul 30 12:54:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 12:54:22 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 12:54:22 2012] Setting source spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Jul 30 12:54:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon Jul 30 13:31:59 2012] Not generating rmf since there are only 51 counts
[Mon Jul 30 13:31:59 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:50 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:50 2012] Error reading totcts from fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Jul 30 13:49:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:53 2012] Using photon index=1.80, rate=0.00136, arf fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src42.arf
[Mon Jul 30 13:49:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:53 2012] Updating source flux to 2.4e-14
[Mon Jul 30 13:51:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting