[Sun Jul 29 19:56:36 2012] Detection parameters:
  Position = (271.5, 289.0) = 3 6 31.02 -9 43 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.0 +/- 22.0
  Background counts = 41.0
  Rate = 0.004 +/- 0.0004

[Sun Jul 29 19:56:37 2012] Off-axis axis estimate = 2.07'
[Sun Jul 29 23:15:35 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 23:15:35 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Sun Jul 29 23:15:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.713
[Sun Jul 29 23:15:35 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.46"
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src18.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src18.csv
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src18.csv
[Mon Jul 30 01:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jul 30 01:38:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:39:28 2012] Warning, spatial fit 18 centroid is now closest to src. 52
[Mon Jul 30 01:39:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:28 2012] Assessing source extent using major
[Mon Jul 30 01:39:28 2012] Source does appear to be extended
[Mon Jul 30 01:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:39:28 2012] Source is confused with source 55
[Mon Jul 30 01:39:28 2012] Source is confused with source 50
[Mon Jul 30 01:39:28 2012] Source is confused with source 52
[Mon Jul 30 04:32:11 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 04:32:11 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Mon Jul 30 04:32:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.713
[Mon Jul 30 04:32:11 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.46"
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src18.ximg exists
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Jul 30 07:12:22 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src18 appears to have run properly
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Jul 30 07:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Jul 30 07:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jul 30 07:12:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:13:03 2012] Warning, spatial fit 18 centroid is now closest to src. 52
[Mon Jul 30 07:13:03 2012] Source 29 is offset by -7.103785 and 0.799093 pixels which is larger than
2 X fitted extent = 3.921752 x 3.921752, not incorporating fit results
[Mon Jul 30 07:13:03 2012] Spatial fit model total counts = 971.813000, observed total counts = 844.000000
[Mon Jul 30 07:13:03 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 30 07:13:03 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:13:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:13:03 2012] Assessing source extent using major
[Mon Jul 30 07:13:03 2012] Source does appear to be extended
[Mon Jul 30 07:13:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 12:30:40 2012] XMMSAS src. selection expression = ellipse(23571.994690, 25098.809113, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 12:30:40 2012] Writing source region out to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src29_src.reg
[Mon Jul 30 12:30:40 2012] Extracting stamp from image fullrun_mos2_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (234, 252) - (309, 327)
[Mon Jul 30 12:30:40 2012] XMMSAS bgd. selection expression = annulus(23571.994690, 25098.809113, 1087.500000, 2175.000000, X, Y) && !ellipse(24338.324600, 24601.477000, 819.208024, 819.208024, 0.000000, X, Y) && !ellipse(22560.159720, 26956.511800, 403.718412, 403.718412, 0.000000, X, Y) && !ellipse(25686.513980, 24332.532200, 311.711209, 311.711209, 0.000000, X, Y) && !ellipse(23479.525330, 24606.757843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23758.696350, 25548.618866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23458.426760, 27413.846600, 281.749608, 281.749608, 0.000000, X, Y) && !ellipse(22087.810745, 24583.531647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22951.700195, 24926.818970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24606.022400, 25944.252747, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 12:30:40 2012] Writing fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src29.gif
[Mon Jul 30 12:43:31 2012] Mean detx,y = (-571.80, -60.46) 
[Mon Jul 30 12:43:33 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 12:43:50 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 12:43:50 2012] Setting source spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jul 30 12:43:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Jul 30 13:28:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 30 13:28:35 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:48 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:48 2012] Error reading totcts from fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jul 30 13:49:52 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:52 2012] Using photon index=1.80, rate=0.0035, arf fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src29.arf
[Mon Jul 30 13:49:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:52 2012] Updating source flux to 3.7e-14
[Mon Jul 30 13:51:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting