[Sun Jul 29 19:56:36 2012] Detection parameters:
  Position = (442.5, 227.3) = 3 5 40.70 -9 47 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.1 +/- 16.8
  Background counts = 24.3
  Rate = 0.002 +/- 0.0003

[Sun Jul 29 19:56:37 2012] Off-axis axis estimate = 11.65'
[Sun Jul 29 23:15:35 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 23:15:35 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Sun Jul 29 23:15:35 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.113
[Sun Jul 29 23:15:35 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 12.25"
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src23.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src23.csv
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src23.csv
[Mon Jul 30 01:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Jul 30 01:38:52 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Jul 30 01:39:28 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 11.403214 pixels away
[Mon Jul 30 01:39:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:28 2012] Assessing source extent using major
[Mon Jul 30 01:39:28 2012] Source does appear to be extended
[Mon Jul 30 01:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 04:32:11 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 04:32:11 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Mon Jul 30 04:32:11 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.113
[Mon Jul 30 04:32:11 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 12.25"
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src23.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src23.csv
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src23.csv
[Mon Jul 30 07:12:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Jul 30 07:12:23 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Mon Jul 30 07:13:03 2012] Spatial fit model total counts = 418.230000, observed total counts = 416.000000
[Mon Jul 30 07:13:03 2012] Offset between fit and detection position for source 20 = 0.296205 pixels
[Mon Jul 30 07:13:03 2012] 415.128600 total counts/ 322.156000 bgd. counts: snr = 5.179906
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.296205 pixels
  Position = (442.4, 227.6) = 3 5 40.73 -9 47 56.2
  Extent = 4.5 (3.6-5.5)", rotation angle = 0
  Source counts = 93.0 +/- 20.4
  Background counts = 322.2
  Rate = 0.001 +/- 0.0003
[Mon Jul 30 07:13:04 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:13:04 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 07:13:04 2012] Source does appear to be extended
[Mon Jul 30 07:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 12:30:40 2012] XMMSAS src. selection expression = ellipse(38440.934140, 19749.868500, 271.485608, 271.485608, 0.000000, X, Y)
[Mon Jul 30 12:30:40 2012] Writing source region out to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src20_src.reg
[Mon Jul 30 12:30:40 2012] Extracting stamp from image fullrun_mos2_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (427, 212) - (458, 243)
[Mon Jul 30 12:30:40 2012] XMMSAS bgd. selection expression = annulus(38440.934140, 19749.868500, 452.476013, 904.952026, X, Y)
[Mon Jul 30 12:30:40 2012] Writing fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src20.gif
[Mon Jul 30 12:45:52 2012] Mean detx,y = (15005.98, 319.89) 
[Mon Jul 30 12:45:54 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 12:46:03 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 12:46:04 2012] Setting source spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Jul 30 12:46:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Jul 30 13:29:31 2012] Not generating rmf since there are only 92 counts
[Mon Jul 30 13:29:31 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:48 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:48 2012] Error reading totcts from fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Jul 30 13:49:52 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:52 2012] Using photon index=1.80, rate=0.00141, arf fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src20.arf
[Mon Jul 30 13:49:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:52 2012] Updating source flux to 5.8e-14
[Mon Jul 30 13:51:52 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting