[Sun Jul 29 19:56:35 2012] Detection parameters:
  Position = (422.6, 315.1) = 3 5 46.56 -9 41 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.5 +/- 14.7
  Background counts = 25.5
  Rate = 0.002 +/- 0.0002

[Sun Jul 29 19:56:37 2012] Off-axis axis estimate = 9.08'
[Sun Jul 29 23:15:35 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 23:15:35 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Sun Jul 29 23:15:35 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.986
[Sun Jul 29 23:15:35 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.97"
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src31.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src31.csv
[Mon Jul 30 01:38:51 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Jul 30 01:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src31.csv
[Mon Jul 30 01:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Jul 30 01:38:52 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Mon Jul 30 01:39:28 2012] Spatial fit model total counts = 363.243000, observed total counts = 328.000000
[Mon Jul 30 01:39:28 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 30 01:39:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:28 2012] Assessing source extent using major
[Mon Jul 30 01:39:28 2012] Source does appear to be extended
[Mon Jul 30 01:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 04:32:11 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 04:32:11 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Mon Jul 30 04:32:11 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.986
[Mon Jul 30 04:32:11 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 10.97"
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src30.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src30.csv
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon Jul 30 07:12:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src30.csv
[Mon Jul 30 07:12:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon Jul 30 07:12:23 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Mon Jul 30 07:13:03 2012] Spatial fit model total counts = 529.329000, observed total counts = 515.000000
[Mon Jul 30 07:13:03 2012] Offset between fit and detection position for source 12 = 0.221623 pixels
[Mon Jul 30 07:13:03 2012] 523.334600 total counts/ 440.875000 bgd. counts: snr = 3.927204
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.221623 pixels
  Position = (422.4, 315.1) = 3 5 46.63 -9 41 35.5
  Extent = 4.9 (4.0-6.3)", rotation angle = 0
  Source counts = 82.5 +/- 22.9
  Background counts = 440.9
  Rate = 0.001 +/- 0.0003
[Mon Jul 30 07:13:04 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:13:04 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 07:13:04 2012] Source does appear to be extended
[Mon Jul 30 07:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 12:30:40 2012] XMMSAS src. selection expression = ellipse(36700.805160, 27365.472600, 292.892408, 292.892408, 0.000000, X, Y)
[Mon Jul 30 12:30:40 2012] Writing source region out to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src12_src.reg
[Mon Jul 30 12:30:40 2012] Extracting stamp from image fullrun_mos2_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (406, 298) - (439, 332)
[Mon Jul 30 12:30:40 2012] XMMSAS bgd. selection expression = annulus(36700.805160, 27365.472600, 488.154014, 976.308028, X, Y)
[Mon Jul 30 12:30:40 2012] Writing fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src12.gif
[Mon Jul 30 12:48:46 2012] Mean detx,y = (10982.08, -6373.82) 
[Mon Jul 30 12:48:48 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 12:49:02 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 12:49:02 2012] Setting source spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jul 30 12:49:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Jul 30 13:30:20 2012] Not generating rmf since there are only 82 counts
[Mon Jul 30 13:30:20 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:49 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:49 2012] Error reading totcts from fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jul 30 13:49:52 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:52 2012] Using photon index=1.80, rate=0.00125, arf fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src12.arf
[Mon Jul 30 13:49:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:52 2012] Updating source flux to 3.9e-14
[Mon Jul 30 13:51:52 2012] Flag p found in src. 12 procflags, skipping spectral fitting
[Mon Jul 30 13:51:52 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting