[Sun Jul 29 19:55:56 2012] Detection parameters:
  Position = (196.2, 359.1) = 3 6 53.16 -9 38 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 317.9 +/- 24.4
  Background counts = 26.3
  Rate = 0.009 +/- 0.0007

[Sun Jul 29 19:55:57 2012] Off-axis axis estimate = 8.62'
[Sun Jul 29 22:16:13 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 22:16:13 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Sun Jul 29 22:16:13 2012] source mask rpix=2.5, npix_max = 35, mask sum = 31, frac = 0.880
[Sun Jul 29 22:16:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.74"
[Sun Jul 29 23:15:34 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul 29 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src3.csv
[Sun Jul 29 23:15:34 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul 29 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src3.csv
[Sun Jul 29 23:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 23:15:35 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul 29 23:15:35 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul 29 23:15:35 2012] Fit fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jul 30 01:39:18 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.169001 pixels away
[Mon Jul 30 01:39:18 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.258742 pixels away
[Mon Jul 30 01:39:18 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:18 2012] Assessing source extent using major
[Mon Jul 30 01:39:18 2012] Source does appear to be extended
[Mon Jul 30 01:39:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 03:36:42 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 03:36:42 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Mon Jul 30 03:36:42 2012] source mask rpix=2.5, npix_max = 35, mask sum = 31, frac = 0.880
[Mon Jul 30 03:36:42 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.74"
[Mon Jul 30 04:32:10 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jul 30 04:32:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_src3.csv
[Mon Jul 30 04:32:10 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jul 30 04:32:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_src3.csv
[Mon Jul 30 04:32:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 04:32:10 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jul 30 04:32:10 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jul 30 04:32:10 2012] Fit fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jul 30 07:12:52 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.246914 pixels away
[Mon Jul 30 07:12:52 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:12:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:12:52 2012] Assessing source extent using major
[Mon Jul 30 07:12:52 2012] Source does appear to be extended
[Mon Jul 30 07:12:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 11:19:44 2012] XMMSAS src. selection expression = ellipse(17022.993225, 31192.239410, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 11:19:44 2012] Writing source region out to fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src7_src.reg
[Mon Jul 30 11:19:44 2012] Extracting stamp from image fullrun_mos1_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (159, 322) - (234, 397)
[Mon Jul 30 11:19:44 2012] XMMSAS bgd. selection expression = annulus(17022.993225, 31192.239410, 1087.500000, 2175.000000, X, Y) && !ellipse(15059.645523, 30821.339783, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 11:19:44 2012] Writing fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src7.gif
[Mon Jul 30 11:27:16 2012] Mean detx,y = (-3683.28, 8696.99) 
[Mon Jul 30 11:27:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 11:27:40 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 11:27:41 2012] Setting source spectrum file to fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jul 30 11:27:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Jul 30 12:04:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 30 12:04:17 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:44 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:44 2012] Error reading totcts from fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jul 30 13:49:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:46 2012] Using photon index=1.80, rate=0.00911, arf fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src7.arf
[Mon Jul 30 13:49:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:46 2012] Updating source flux to 1.5e-13
[Mon Jul 30 13:49:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting