[Sun Jul 29 19:55:57 2012] Detection parameters:
  Position = (280.0, 269.0) = 3 6 28.51 -9 44 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.2 +/- 14.6
  Background counts = 43.8
  Rate = 0.001 +/- 0.0002

[Sun Jul 29 19:55:57 2012] Off-axis axis estimate = 2.52'
[Sun Jul 29 22:16:13 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 22:16:13 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Sun Jul 29 22:16:13 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Sun Jul 29 22:16:13 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.69"
[Sun Jul 29 23:15:35 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src35.ximg exists
[Sun Jul 29 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src35.csv
[Sun Jul 29 23:15:35 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src35_1.ximg exists
[Sun Jul 29 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src35.csv
[Sun Jul 29 23:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 23:15:35 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sun Jul 29 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sun Jul 29 23:15:35 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sun Jul 29 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sun Jul 29 23:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:39:18 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 12.018413 pixels away
[Mon Jul 30 01:39:18 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:18 2012] Assessing source extent using major
[Mon Jul 30 01:39:18 2012] Source does appear to be extended
[Mon Jul 30 01:39:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 03:36:42 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 03:36:42 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Mon Jul 30 03:36:42 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Mon Jul 30 03:36:42 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 7.69"
[Mon Jul 30 04:32:10 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_src34.ximg exists
[Mon Jul 30 04:32:10 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_src34_1.ximg exists
[Mon Jul 30 04:32:10 2012] Fit fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_src34 appears to have run properly
[Mon Jul 30 04:32:11 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Mon Jul 30 04:32:11 2012] fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Mon Jul 30 04:32:11 2012] Fit fullrun_mos1_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Mon Jul 30 07:12:52 2012] Source 30 is offset by -0.483323 and -8.042982 pixels which is larger than
2 X fitted extent = 4.165973 x 4.165973, not incorporating fit results
[Mon Jul 30 07:12:52 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:12:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:12:52 2012] Assessing source extent using major
[Mon Jul 30 07:12:52 2012] Source does appear to be extended
[Mon Jul 30 07:12:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 11:19:45 2012] XMMSAS src. selection expression = ellipse(24315.102875, 23356.650574, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 11:19:45 2012] Writing source region out to fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src30_src.reg
[Mon Jul 30 11:19:45 2012] Extracting stamp from image fullrun_mos1_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (243, 232) - (318, 307)
[Mon Jul 30 11:19:45 2012] XMMSAS bgd. selection expression = annulus(24315.102875, 23356.650574, 1087.500000, 2175.000000, X, Y) && !ellipse(24345.830800, 24613.552000, 857.512025, 857.512025, 0.000000, X, Y) && !ellipse(25695.188600, 24325.693200, 363.308010, 363.308010, 0.000000, X, Y) && !ellipse(26480.390400, 21280.941200, 349.486410, 349.486410, 0.000000, X, Y) && !ellipse(23453.691895, 26059.714661, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 11:19:45 2012] Writing fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src30.gif
[Mon Jul 30 11:45:03 2012] Mean detx,y = (1382.66, -593.47) 
[Mon Jul 30 11:45:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 11:45:23 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 11:45:23 2012] Setting source spectrum file to fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Jul 30 11:45:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Mon Jul 30 12:29:29 2012] Not generating rmf since there are only 83 counts
[Mon Jul 30 12:29:29 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:45 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:45 2012] Error reading totcts from fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Jul 30 13:49:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:47 2012] Using photon index=1.80, rate=0.00135, arf fullrun_mos1_xmm0601930401_pi300-10000_pass1_cl_src30.arf
[Mon Jul 30 13:49:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:47 2012] Updating source flux to 1.4e-14
[Mon Jul 30 13:49:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting