[Sat Jun  2 12:35:23 2012] Detection parameters:
  Position = (237.9, 146.7) = 3 34 20.28 -39 10 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.6 +/- 23.8
  Background counts = 194.8
  Rate = 0.003 +/- 0.0005

[Sat Jun  2 12:35:23 2012] Off-axis axis estimate = 11.85'
[Sat Jun  2 12:41:23 2012] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 12:41:23 2012] Initial guess for spatial extent in simple fitting = 12.35"
[Sat Jun  2 12:41:23 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.942
[Sat Jun  2 12:41:23 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.35"
[Sat Jun  2 13:36:13 2012] fullrun_pn_xmm0601930201_pi300-10000_cl_pass0_src28.ximg exists
[Sat Jun  2 13:36:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930201_pi300-10000_cl_pass0_src28.csv
[Sat Jun  2 13:36:13 2012] fullrun_pn_xmm0601930201_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat Jun  2 13:36:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930201_pi300-10000_cl_pass0_src28.csv
[Sat Jun  2 13:36:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 13:36:14 2012] fullrun_pn_xmm0601930201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat Jun  2 13:36:14 2012] fullrun_pn_xmm0601930201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Jun  2 13:36:14 2012] Fit fullrun_pn_xmm0601930201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sat Jun  2 15:05:58 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 15.432811 pixels away
[Sat Jun  2 15:05:59 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 15:05:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 15:05:59 2012] Assessing source extent using major
[Sat Jun  2 15:05:59 2012] Source does appear to be extended
[Sat Jun  2 15:05:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 15:06:26 2012] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 15:06:26 2012] Initial guess for spatial extent in simple fitting = 12.35"
[Sat Jun  2 15:06:26 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.942
[Sat Jun  2 15:06:26 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 12.35"
[Sat Jun  2 15:54:56 2012] fullrun_pn_xmm0601930201_pi300-10000_cl_pass1_src28.ximg exists
[Sat Jun  2 15:54:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930201_pi300-10000_cl_pass1_src28.csv
[Sat Jun  2 15:54:56 2012] fullrun_pn_xmm0601930201_pi300-10000_cl_pass1_src28_1.ximg exists
[Sat Jun  2 15:54:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930201_pi300-10000_cl_pass1_src28.csv
[Sat Jun  2 15:54:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930201_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 15:54:57 2012] fullrun_pn_xmm0601930201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sat Jun  2 15:54:57 2012] fullrun_pn_xmm0601930201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Jun  2 15:54:57 2012] Fit fullrun_pn_xmm0601930201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sat Jun  2 17:04:28 2012] Spatial fit model total counts = 772.430000, observed total counts = 771.000000
[Sat Jun  2 17:04:28 2012] Offset between fit and detection position for source 29 = 0.172481 pixels
[Sat Jun  2 17:04:28 2012] 766.906400 total counts/ 708.195000 bgd. counts: snr = 2.206206
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.172481 pixels
  Position = (237.9, 146.5) = 3 34 20.26 -39 10 22.5
  Extent = 6.2 (3.8-9.8)", rotation angle = 0
  Source counts = 58.7 +/- 27.7
  Background counts = 708.2
  Rate = 0.002 +/- 0.0007
[Sat Jun  2 17:04:28 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 17:04:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 17:04:28 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 17:04:28 2012] Source does appear to be extended
[Sat Jun  2 17:04:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 17:04:49 2012] XMMSAS src. selection expression = ellipse(20651.827200, 12698.701800, 372.882611, 372.882611, 0.000000, X, Y)
[Sat Jun  2 17:04:49 2012] Writing source region out to fullrun_pn_xmm0601930201_pi300-10000_pass1_cl_src29_src.reg
[Sat Jun  2 17:04:49 2012] Extracting stamp from image fullrun_pn_xmm0601930201_pi300-10000_cl_sm2.00.img.gz, (217, 125) - (259, 168)
[Sat Jun  2 17:04:49 2012] XMMSAS bgd. selection expression = annulus(20651.827200, 12698.701800, 621.471018, 1242.942036, X, Y) && !ellipse(18776.829910, 14476.909073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19368.687714, 13046.951447, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  2 17:04:49 2012] Writing fullrun_pn_xmm0601930201_pi300-10000_pass1_cl_src29.gif
[Sat Jun  2 17:26:22 2012] Mean detx,y = (4148.76, -11779.92) 
[Sat Jun  2 17:26:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 17:26:49 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 17:26:49 2012] Setting source spectrum file to fullrun_pn_xmm0601930201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jun  2 17:26:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601930201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jun  2 18:02:50 2012] Not generating rmf since there are only 58 counts
[Sat Jun  2 18:02:50 2012] rmf not generated due to insufficient counts
[Sat Jun  2 19:19:32 2012] Updating aperture counts using extracted products
[Sat Jun  2 19:19:32 2012] Error reading totcts from fullrun_pn_xmm0601930201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jun  2 19:19:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 19:19:33 2012] Using photon index=1.80, rate=0.00157, arf fullrun_pn_xmm0601930201_pi300-10000_pass1_cl_src29.arf
[Sat Jun  2 19:19:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 19:19:33 2012] Updating source flux to 9.5e-15
[Sat Jun  2 19:21:01 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting