[Sat Jun  2 12:36:40 2012] Detection parameters:
  Position = (383.4, 169.3) = 3 33 25.86 -39 8 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 430.0 +/- 26.2
  Background counts = 25.8
  Rate = 0.008 +/- 0.0005

[Sat Jun  2 12:36:42 2012] Off-axis axis estimate = 11.21'
[Sat Jun  2 14:18:55 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 14:18:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  2 14:18:55 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Sat Jun  2 14:18:55 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.148
[Sat Jun  2 14:18:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.03"
[Sat Jun  2 15:05:46 2012] fullrun_mos2_xmm0601930201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  2 15:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930201_pi300-10000_cl_pass0_src1.csv
[Sat Jun  2 15:05:46 2012] fullrun_mos2_xmm0601930201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  2 15:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930201_pi300-10000_cl_pass0_src1.csv
[Sat Jun  2 15:05:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 15:05:46 2012] fullrun_mos2_xmm0601930201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  2 15:05:46 2012] fullrun_mos2_xmm0601930201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  2 15:05:46 2012] Fit fullrun_mos2_xmm0601930201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  2 15:06:15 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.865290 pixels away
[Sat Jun  2 15:06:15 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 15:06:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 15:06:15 2012] Assessing source extent using major
[Sat Jun  2 15:06:15 2012] Source does appear to be extended
[Sat Jun  2 15:06:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 16:29:28 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 16:29:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  2 16:29:28 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Sat Jun  2 16:29:28 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.148
[Sat Jun  2 16:29:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.03"
[Sat Jun  2 17:04:20 2012] fullrun_mos2_xmm0601930201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  2 17:04:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930201_pi300-10000_cl_pass1_src1.csv
[Sat Jun  2 17:04:20 2012] fullrun_mos2_xmm0601930201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  2 17:04:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930201_pi300-10000_cl_pass1_src1.csv
[Sat Jun  2 17:04:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 17:04:20 2012] fullrun_mos2_xmm0601930201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  2 17:04:20 2012] fullrun_mos2_xmm0601930201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  2 17:04:20 2012] Fit fullrun_mos2_xmm0601930201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  2 17:04:38 2012] Spatial fit model total counts = 853.001000, observed total counts = 853.000000
[Sat Jun  2 17:04:38 2012] Offset between fit and detection position for source 1 = 0.236049 pixels
[Sat Jun  2 17:04:38 2012] 858.430000 total counts/ 576.344000 bgd. counts: snr = 11.750075
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.236049 pixels
  Position = (383.3, 169.5) = 3 33 25.91 -39 8 42.3
  Extent = 5.7 (5.0-6.2)", rotation angle = 0
  Source counts = 282.1 +/- 29.3
  Background counts = 576.3
  Rate = 0.005 +/- 0.0006
[Sat Jun  2 17:04:38 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 17:04:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 17:04:38 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 17:04:38 2012] Source does appear to be extended
[Sat Jun  2 17:04:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 18:37:34 2012] XMMSAS src. selection expression = ellipse(33296.300000, 14699.146800, 339.001810, 339.001810, 0.000000, X, Y)
[Sat Jun  2 18:37:34 2012] Writing source region out to fullrun_mos2_xmm0601930201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  2 18:37:34 2012] Extracting stamp from image fullrun_mos2_xmm0601930201_pi300-10000_cl_sm2.00.img.gz, (364, 150) - (403, 189)
[Sat Jun  2 18:37:34 2012] XMMSAS bgd. selection expression = annulus(33296.300000, 14699.146800, 565.003016, 1130.006033, X, Y)
[Sat Jun  2 18:37:34 2012] Writing fullrun_mos2_xmm0601930201_pi300-10000_pass1_cl_src1.gif
[Sat Jun  2 18:37:38 2012] Mean detx,y = (8716.19, 9489.21) 
[Sat Jun  2 18:37:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 18:37:46 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 18:37:46 2012] Setting source spectrum file to fullrun_mos2_xmm0601930201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 18:37:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  2 19:19:34 2012] Updating aperture counts using extracted products
[Sat Jun  2 19:19:34 2012] Error reading totcts from fullrun_mos2_xmm0601930201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 19:19:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 19:19:34 2012] Using photon index=1.80, rate=0.00531, arf fullrun_mos2_xmm0601930201_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 19:19:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 19:19:34 2012] Updating source flux to 1.6e-13
[Sat Jun  2 19:21:01 2012] Reading fit data from xmm0601930201/analysis//spectral/fullrun_mos2_xmm0601930201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun  2 19:21:01 2012] Spectral fit parameter nH value = 9.81635e+20
[Sat Jun  2 19:21:01 2012] Spectral fit parameter PhoIndex value = 2.16005
[Sat Jun  2 19:21:01 2012] Failed to get F(0.3-8.0) from xmm0601930201/analysis//spectral/fullrun_mos2_xmm0601930201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun  2 19:21:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 19:21:01 2012] Using Nh = 9.8e+20, photon index=2.16, rate=0.00531, arf fullrun_mos2_xmm0601930201_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 19:21:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 19:21:01 2012] Updating source flux to 1.5e-13