[Sat Jun  2 12:35:58 2012] Detection parameters:
  Position = (383.5, 169.9) = 3 33 25.84 -39 8 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 498.0 +/- 27.7
  Background counts = 30.8
  Rate = 0.009 +/- 0.0005

[Sat Jun  2 12:35:59 2012] Off-axis axis estimate = 11.18'
[Sat Jun  2 13:36:14 2012] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 13:36:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  2 13:36:14 2012] Initial guess for spatial extent in simple fitting = 12.02"
[Sat Jun  2 13:36:14 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.987
[Sat Jun  2 13:36:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.02"
[Sat Jun  2 14:18:54 2012] fullrun_mos1_xmm0601930201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  2 14:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930201_pi300-10000_cl_pass0_src1.csv
[Sat Jun  2 14:18:54 2012] fullrun_mos1_xmm0601930201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  2 14:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930201_pi300-10000_cl_pass0_src1.csv
[Sat Jun  2 14:18:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601930201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601930201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 14:18:54 2012] fullrun_mos1_xmm0601930201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  2 14:18:54 2012] fullrun_mos1_xmm0601930201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  2 14:18:54 2012] Fit fullrun_mos1_xmm0601930201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  2 15:06:07 2012] Spatial fit model total counts = 1025.000000, observed total counts = 1025.000000
[Sat Jun  2 15:06:07 2012] Offset between fit and detection position for source 1 = 0.118598 pixels
[Sat Jun  2 15:06:07 2012] 1031.503000 total counts/ 699.177000 bgd. counts: snr = 12.568133
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.118598 pixels
  Position = (383.3, 169.8) = 3 33 25.88 -39 8 40.9
  Extent = 5.5 (5.0-6.1)", rotation angle = 0
  Source counts = 332.3 +/- 32.1
  Background counts = 699.2
  Rate = 0.006 +/- 0.0006
[Sat Jun  2 15:06:07 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 15:06:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 15:06:07 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 15:06:07 2012] Source does appear to be extended
[Sat Jun  2 15:06:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 15:54:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  2 15:54:57 2012] Initial guess for spatial extent in simple fitting = 5.52"
[Sat Jun  2 15:54:57 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.958
[Sat Jun  2 15:54:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.52"
[Sat Jun  2 16:29:28 2012] fullrun_mos1_xmm0601930201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  2 16:29:28 2012] fullrun_mos1_xmm0601930201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  2 16:29:28 2012] Fit fullrun_mos1_xmm0601930201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jun  2 16:29:28 2012] fullrun_mos1_xmm0601930201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  2 16:29:28 2012] fullrun_mos1_xmm0601930201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  2 16:29:28 2012] Fit fullrun_mos1_xmm0601930201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  2 17:04:33 2012] Spatial fit model total counts = 723.001000, observed total counts = 723.000000
[Sat Jun  2 17:04:33 2012] Offset between fit and detection position for source 1 = 0.014278 pixels
[Sat Jun  2 17:04:33 2012] 727.662000 total counts/ 402.698000 bgd. counts: snr = 16.193679
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014278 pixels
  Position = (383.3, 169.8) = 3 33 25.88 -39 8 41.0
  Extent = 5.4 (4.9-5.9)", rotation angle = 0
  Source counts = 325.0 +/- 27.0
  Background counts = 402.7
  Rate = 0.006 +/- 0.0005
[Sat Jun  2 17:04:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 17:04:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 17:04:33 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 17:04:33 2012] Source does appear to be extended
[Sat Jun  2 17:04:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 18:09:15 2012] XMMSAS src. selection expression = ellipse(33302.526600, 14726.906580, 324.841209, 324.841209, 0.000000, X, Y)
[Sat Jun  2 18:09:15 2012] Writing source region out to fullrun_mos1_xmm0601930201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  2 18:09:15 2012] Extracting stamp from image fullrun_mos1_xmm0601930201_pi300-10000_cl_sm2.00.img.gz, (365, 151) - (402, 189)
[Sat Jun  2 18:09:15 2012] XMMSAS bgd. selection expression = annulus(33302.526600, 14726.906580, 541.402016, 1082.804031, X, Y)
[Sat Jun  2 18:09:15 2012] Writing fullrun_mos1_xmm0601930201_pi300-10000_pass1_cl_src1.gif
[Sat Jun  2 18:09:19 2012] Mean detx,y = (9715.14, -8845.74) 
[Sat Jun  2 18:09:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 18:09:28 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 18:09:28 2012] Setting source spectrum file to fullrun_mos1_xmm0601930201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 18:09:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601930201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  2 19:19:33 2012] Updating aperture counts using extracted products
[Sat Jun  2 19:19:33 2012] Error reading totcts from fullrun_mos1_xmm0601930201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 19:19:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 19:19:33 2012] Using photon index=1.80, rate=0.00613, arf fullrun_mos1_xmm0601930201_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 19:19:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 19:19:33 2012] Updating source flux to 1.8e-13
[Sat Jun  2 19:20:10 2012] Reading fit data from xmm0601930201/analysis//spectral/fullrun_mos1_xmm0601930201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun  2 19:20:10 2012] Spectral fit parameter nH value = 5.68133e+15
[Sat Jun  2 19:20:10 2012] Spectral fit parameter PhoIndex value = 1.71705
[Sat Jun  2 19:20:10 2012] Failed to get F(0.3-8.0) from xmm0601930201/analysis//spectral/fullrun_mos1_xmm0601930201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun  2 19:20:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 19:20:10 2012] Using Nh = 5.7e+15, photon index=1.72, rate=0.00613, arf fullrun_mos1_xmm0601930201_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 19:20:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 19:20:10 2012] Updating source flux to 1.9e-13