[Sat Jun  8 01:13:57 2013] Detection parameters:
  Position = (214.9, 430.9) = 10 58 36.64 1 44 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 310.7 +/- 24.9
  Background counts = 88.0
  Rate = 0.008 +/- 0.0006

[Sat Jun  8 01:13:58 2013] Off-axis axis estimate = 11.35'
[Sat Jun  8 01:18:38 2013] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 01:18:38 2013] Initial guess for spatial extent in simple fitting = 12.11"
[Sat Jun  8 01:18:38 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.835
[Sat Jun  8 01:18:38 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 12.11"
[Sat Jun  8 03:06:00 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun  8 03:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src6.csv
[Sat Jun  8 03:06:00 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun  8 03:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src6.csv
[Sat Jun  8 03:06:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 03:06:00 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun  8 03:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun  8 03:06:00 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun  8 03:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun  8 03:06:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 05:32:48 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.944468 pixels away
[Sat Jun  8 05:32:49 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 05:32:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 05:32:49 2013] Assessing source extent using major
[Sat Jun  8 05:32:49 2013] Source does appear to be extended
[Sat Jun  8 05:32:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 05:33:08 2013] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 05:33:08 2013] Initial guess for spatial extent in simple fitting = 12.11"
[Sat Jun  8 05:33:08 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.835
[Sat Jun  8 05:33:08 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 12.11"
[Sat Jun  8 07:05:52 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun  8 07:05:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src6.csv
[Sat Jun  8 07:05:52 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun  8 07:05:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src6.csv
[Sat Jun  8 07:05:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 07:05:52 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun  8 07:05:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun  8 07:05:52 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun  8 07:05:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun  8 07:05:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 08:20:21 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.944468 pixels away
[Sat Jun  8 08:20:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 08:20:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 08:20:21 2013] Assessing source extent using major
[Sat Jun  8 08:20:21 2013] Source does appear to be extended
[Sat Jun  8 08:20:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 08:20:41 2013] XMMSAS src. selection expression = ellipse(18644.297485, 37437.701996, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 08:20:41 2013] Writing source region out to fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun  8 08:20:41 2013] Extracting stamp from image fullrun_pn_xmm0601930101_pi300-10000_cl_sm2.00.img.gz, (177, 393) - (252, 468)
[Sat Jun  8 08:20:41 2013] XMMSAS bgd. selection expression = annulus(18644.297485, 37437.701996, 1087.500000, 2175.000000, X, Y) && !ellipse(20877.735800, 39208.068200, 333.858410, 333.858410, 0.000000, X, Y) && !ellipse(20971.321808, 37373.195404, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 08:20:41 2013] Writing fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src6.gif
[Sat Jun  8 08:28:53 2013] Mean detx,y = (-3527.34, -11920.69) 
[Sat Jun  8 08:28:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  8 08:29:24 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  8 08:29:25 2013] Setting source spectrum file to fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun  8 08:29:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun  8 09:09:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 09:09:16 2013] rmf not generated due to insufficient counts
[Sat Jun  8 10:21:31 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:21:31 2013] Total counts from fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 618.00
[Sat Jun  8 10:21:31 2013] Total counts from fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 2624.00
[Sat Jun  8 10:21:31 2013] Got source and background scale factors 1074897.000000, 7959252.000000
[Sat Jun  8 10:21:31 2013] User source parameters:
  Position = (214.9, 430.9) = 10 58 36.64 1 44 13.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 263.6 +/- 25.9
  Background aperture counts = 354.4
  Rate = 0.007 +/- 0.0007

[Sat Jun  8 10:21:31 2013] Updating counts from extracted products
[Sat Jun  8 10:21:31 2013] Set source signif. to 263.63/18.82 = 14.00
[Sat Jun  8 10:21:37 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:21:37 2013] Using photon index=1.80, rate=0.00739, arf fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src6.arf
[Sat Jun  8 10:21:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:21:37 2013] Updating source flux to 4.8e-14
[Sat Jun  8 10:21:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 10:21:56 2013] xmm0601930101/analysis//spectral/fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete