[Sat Jun  8 01:13:58 2013] Detection parameters:
  Position = (426.8, 194.9) = 10 57 35.15 1 27 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 394.3 +/- 26.8
  Background counts = 74.0
  Rate = 0.01 +/- 0.0007

[Sat Jun  8 01:13:58 2013] Off-axis axis estimate = 11.96'
[Sat Jun  8 01:18:38 2013] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 01:18:38 2013] Initial guess for spatial extent in simple fitting = 12.41"
[Sat Jun  8 01:18:38 2013] source mask rpix=2.9, npix_max = 44, mask sum = 42, frac = 0.934
[Sat Jun  8 01:18:38 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 12.41"
[Sat Jun  8 03:06:00 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src38.ximg exists
[Sat Jun  8 03:06:00 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sat Jun  8 03:06:00 2013] Fit fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src38 appears to have run properly
[Sat Jun  8 03:06:01 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sat Jun  8 03:06:01 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sat Jun  8 03:06:01 2013] Fit fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sat Jun  8 05:32:48 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 14.916580 pixels away
[Sat Jun  8 05:32:49 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 05:32:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 05:32:49 2013] Assessing source extent using major
[Sat Jun  8 05:32:49 2013] Source does appear to be extended
[Sat Jun  8 05:32:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 05:33:08 2013] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 05:33:08 2013] Initial guess for spatial extent in simple fitting = 12.41"
[Sat Jun  8 05:33:08 2013] source mask rpix=2.9, npix_max = 44, mask sum = 42, frac = 0.934
[Sat Jun  8 05:33:08 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 12.41"
[Sat Jun  8 07:05:52 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src36.ximg exists
[Sat Jun  8 07:05:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src36.csv
[Sat Jun  8 07:05:52 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src36_1.ximg exists
[Sat Jun  8 07:05:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src36.csv
[Sat Jun  8 07:05:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 07:05:53 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sat Jun  8 07:05:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Jun  8 07:05:53 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sat Jun  8 07:05:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Jun  8 07:05:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 08:20:21 2013] Spatial fit model total counts = 1801.570000, observed total counts = 1230.000000
[Sat Jun  8 08:20:21 2013] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 08:20:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 08:20:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 08:20:21 2013] Assessing source extent using major
[Sat Jun  8 08:20:21 2013] Source does appear to be extended
[Sat Jun  8 08:20:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 08:20:41 2013] XMMSAS src. selection expression = ellipse(37083.876862, 16909.502670, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 08:20:41 2013] Writing source region out to fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src40_src.reg
[Sat Jun  8 08:20:41 2013] Extracting stamp from image fullrun_pn_xmm0601930101_pi300-10000_cl_sm2.00.img.gz, (389, 157) - (464, 232)
[Sat Jun  8 08:20:41 2013] XMMSAS bgd. selection expression = annulus(37083.876862, 16909.502670, 1087.500000, 2175.000000, X, Y) && !ellipse(34197.270599, 19611.276413, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 08:20:41 2013] Writing fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src40.gif
[Sat Jun  8 08:55:49 2013] Mean detx,y = (5874.77, 13940.28) 
[Sat Jun  8 08:55:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  8 08:56:13 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  8 08:56:13 2013] Setting source spectrum file to fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jun  8 08:56:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Jun  8 09:45:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 09:45:19 2013] rmf not generated due to insufficient counts
[Sat Jun  8 10:21:36 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:21:36 2013] Total counts from fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 708.00
[Sat Jun  8 10:21:36 2013] Total counts from fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src40_bgd.pi.gz = 1620.00
[Sat Jun  8 10:21:36 2013] Got source and background scale factors 1108516.000000, 2677444.000000
[Sat Jun  8 10:21:36 2013] User source parameters:
  Position = (426.8, 194.9) = 10 57 35.15 1 27 4.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 37.3 +/- 27.6
  Background aperture counts = 670.7
  Rate = 0.001 +/- 0.0008

[Sat Jun  8 10:21:36 2013] Updating counts from extracted products
[Sat Jun  8 10:21:36 2013] Set source signif. to 37.29/25.90 = 1.44
[Sat Jun  8 10:21:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:21:38 2013] Using photon index=1.80, rate=0.00105, arf fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src40.arf
[Sat Jun  8 10:21:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:21:38 2013] Updating source flux to 7.5e-15
[Sat Jun  8 10:21:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 10:21:56 2013] xmm0601930101/analysis//spectral/fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete