[Sat Jun 8 01:13:57 2013] Detection parameters: Position = (460.4, 344.9) = 10 57 25.41 1 37 57.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 390.6 +/- 27.0 Background counts = 77.4 Rate = 0.01 +/- 0.0007 [Sat Jun 8 01:13:58 2013] Off-axis axis estimate = 12.21' [Sat Jun 8 01:18:38 2013] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 01:18:38 2013] Initial guess for spatial extent in simple fitting = 12.53" [Sat Jun 8 01:18:38 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.071 [Sat Jun 8 01:18:38 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 12.53" [Sat Jun 8 03:06:00 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src14.ximg exists [Sat Jun 8 03:06:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src14.csv [Sat Jun 8 03:06:00 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src14_1.ximg exists [Sat Jun 8 03:06:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src14.csv [Sat Jun 8 03:06:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src14_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 03:06:01 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists [Sat Jun 8 03:06:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src14.csv [Sat Jun 8 03:06:01 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists [Sat Jun 8 03:06:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src14.csv [Sat Jun 8 03:06:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 05:32:48 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 15.253177 pixels away [Sat Jun 8 05:32:49 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 05:32:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 05:32:49 2013] Assessing source extent using major [Sat Jun 8 05:32:49 2013] Source does appear to be extended [Sat Jun 8 05:32:49 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 05:33:08 2013] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 05:33:08 2013] Initial guess for spatial extent in simple fitting = 12.53" [Sat Jun 8 05:33:08 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.071 [Sat Jun 8 05:33:08 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 12.53" [Sat Jun 8 07:05:52 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src13.ximg exists [Sat Jun 8 07:05:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src13.csv [Sat Jun 8 07:05:52 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src13_1.ximg exists [Sat Jun 8 07:05:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src13.csv [Sat Jun 8 07:05:52 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 07:05:52 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Sat Jun 8 07:05:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src13.csv [Sat Jun 8 07:05:52 2013] fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Sat Jun 8 07:05:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src13.csv [Sat Jun 8 07:05:52 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 08:20:21 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 15.253177 pixels away [Sat Jun 8 08:20:21 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 08:20:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 08:20:21 2013] Assessing source extent using major [Sat Jun 8 08:20:21 2013] Source does appear to be extended [Sat Jun 8 08:20:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 08:20:41 2013] XMMSAS src. selection expression = ellipse(40001.969116, 29955.051514, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 08:20:41 2013] Writing source region out to fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src15_src.reg [Sat Jun 8 08:20:41 2013] Extracting stamp from image fullrun_pn_xmm0601930101_pi300-10000_cl_sm2.00.img.gz, (423, 307) - (498, 382) [Sat Jun 8 08:20:41 2013] XMMSAS bgd. selection expression = annulus(40001.969116, 29955.051514, 1087.500000, 2175.000000, X, Y) && !ellipse(39256.615200, 28399.858600, 427.582412, 427.582412, 0.000000, X, Y) [Sat Jun 8 08:20:41 2013] Writing fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src15.gif [Sat Jun 8 08:36:59 2013] Mean detx,y = (13432.89, 3030.11) [Sat Jun 8 08:37:02 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 8 08:37:25 2013] Binned source spectrum to 10 counts/bin [Sat Jun 8 08:37:25 2013] Setting source spectrum file to fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Sat Jun 8 08:37:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src15_bgd.pi.gz [Sat Jun 8 09:18:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 09:18:24 2013] rmf not generated due to insufficient counts [Sat Jun 8 10:21:32 2013] Updating aperture counts using extracted products [Sat Jun 8 10:21:32 2013] Total counts from fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 721.00 [Sat Jun 8 10:21:32 2013] Total counts from fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 1761.00 [Sat Jun 8 10:21:32 2013] Got source and background scale factors 1093384.000000, 5533819.000000 [Sat Jun 8 10:21:32 2013] User source parameters: Position = (460.4, 344.9) = 10 57 25.41 1 37 57.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 373.1 +/- 27.9 Background aperture counts = 347.9 Rate = 0.01 +/- 0.0008 [Sat Jun 8 10:21:32 2013] Updating counts from extracted products [Sat Jun 8 10:21:32 2013] Set source signif. to 373.06/18.65 = 20.00 [Sat Jun 8 10:21:38 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 10:21:38 2013] Using photon index=1.80, rate=0.0105, arf fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src15.arf [Sat Jun 8 10:21:38 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 10:21:38 2013] Updating source flux to 6.9e-14 [Sat Jun 8 10:21:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 10:21:56 2013] xmm0601930101/analysis//spectral/fullrun_pn_xmm0601930101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete