[Sat Jun 8 01:15:12 2013] Detection parameters: Position = (232.0, 286.6) = 10 58 31.66 1 33 49.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 91.3 +/- 15.1 Background counts = 25.9 Rate = 0.004 +/- 0.0007 [Sat Jun 8 01:15:12 2013] Off-axis axis estimate = 4.89' [Sat Jun 8 03:50:27 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 03:50:27 2013] Initial guess for spatial extent in simple fitting = 8.87" [Sat Jun 8 03:50:27 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.930 [Sat Jun 8 03:50:27 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.87" [Sat Jun 8 05:32:33 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src8.ximg exists [Sat Jun 8 05:32:33 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src8.csv [Sat Jun 8 05:32:33 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src8_1.ximg exists [Sat Jun 8 05:32:33 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src8.csv [Sat Jun 8 05:32:33 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 05:32:34 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Sat Jun 8 05:32:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src8.csv [Sat Jun 8 05:32:34 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Sat Jun 8 05:32:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src8.csv [Sat Jun 8 05:32:34 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 05:32:57 2013] Source 21 is offset by -7.216504 and -3.393168 pixels which is larger than 2 X fitted extent = 1.151007 x 2.246901, not incorporating fit results [Sat Jun 8 05:32:57 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 05:32:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 05:32:57 2013] Assessing source extent using major [Sat Jun 8 05:32:57 2013] Source does appear to be extended [Sat Jun 8 05:32:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 07:36:47 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 07:36:47 2013] Initial guess for spatial extent in simple fitting = 8.87" [Sat Jun 8 07:36:47 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.930 [Sat Jun 8 07:36:47 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 8.87" [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src8.ximg exists [Sat Jun 8 08:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src8.csv [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src8_1.ximg exists [Sat Jun 8 08:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src8.csv [Sat Jun 8 08:20:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Sat Jun 8 08:20:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src8.csv [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Sat Jun 8 08:20:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src8.csv [Sat Jun 8 08:20:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 08:20:29 2013] Source 21 is offset by -2.360481 and 0.231591 pixels which is larger than 2 X fitted extent = 0.576713 x 0.576713, not incorporating fit results [Sat Jun 8 08:20:29 2013] Source 21 is offset by -2.798596 and 7.777705 pixels which is larger than 2 X fitted extent = 1.019977 x 1.019977, not incorporating fit results [Sat Jun 8 08:20:29 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 08:20:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 08:20:29 2013] Assessing source extent using major [Sat Jun 8 08:20:29 2013] Source does appear to be extended [Sat Jun 8 08:20:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 10:07:13 2013] XMMSAS src. selection expression = ellipse(20137.746155, 24887.256378, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 10:07:13 2013] Writing source region out to fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src21_src.reg [Sat Jun 8 10:07:13 2013] Extracting stamp from image fullrun_mos2_xmm0601930101_pi300-10000_cl_sm2.00.img.gz, (195, 249) - (270, 324) [Sat Jun 8 10:07:13 2013] XMMSAS bgd. selection expression = annulus(20137.746155, 24887.256378, 1087.500000, 2175.000000, X, Y) && !ellipse(20729.957400, 25165.201200, 430.044812, 372.740011, 67.820200, X, Y) [Sat Jun 8 10:07:13 2013] Writing fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src21.gif [Sat Jun 8 10:09:13 2013] Mean detx,y = (6443.88, -441.91) [Sat Jun 8 10:09:14 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 8 10:09:36 2013] Binned source spectrum to 10 counts/bin [Sat Jun 8 10:09:36 2013] Setting source spectrum file to fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src21_src_b10.pi.gz [Sat Jun 8 10:09:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src21_bgd.pi.gz [Sat Jun 8 10:18:37 2013] Not generating rmf since there are only 91 counts [Sat Jun 8 10:18:37 2013] rmf not generated due to insufficient counts [Sat Jun 8 10:21:42 2013] Updating aperture counts using extracted products [Sat Jun 8 10:21:42 2013] Total counts from fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 3513.00 [Sat Jun 8 10:21:42 2013] Total counts from fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 2204.00 [Sat Jun 8 10:21:42 2013] Got source and background scale factors 1088420.000000, 10482753.000000 [Sat Jun 8 10:21:42 2013] User source parameters: Position = (232.0, 286.6) = 10 58 31.66 1 33 49.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 3284.2 +/- 60.3 Background aperture counts = 228.8 Rate = 0.08 +/- 0.002 [Sat Jun 8 10:21:42 2013] Updating counts from extracted products [Sat Jun 8 10:21:42 2013] Set source signif. to 3284.16/15.13 = 217.10 [Sat Jun 8 10:21:44 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 10:21:44 2013] Using photon index=1.80, rate=0.0831, arf fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src21.arf [Sat Jun 8 10:21:44 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 10:21:44 2013] Updating source flux to 1.6e-12 [Sat Jun 8 10:21:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 10:21:48 2013] xmm0601930101/analysis//spectral/fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete