[Sat Jun 8 01:15:11 2013] Detection parameters: Position = (178.3, 465.6) = 10 58 47.24 1 46 44.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 45.2 +/- 10.0 Background counts = 15.4 Rate = 0.001 +/- 0.0003 [Sat Jun 8 01:15:12 2013] Off-axis axis estimate = 14.92' [Sat Jun 8 03:50:27 2013] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 03:50:27 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 8 03:50:27 2013] Initial guess for spatial extent in simple fitting = 13.89" [Sat Jun 8 03:50:27 2013] source mask rpix=3.2, npix_max = 54, mask sum = 41, frac = 0.751 [Sat Jun 8 03:50:27 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 13.89" [Sat Jun 8 05:32:34 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src27.ximg exists [Sat Jun 8 05:32:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src27.csv [Sat Jun 8 05:32:34 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src27_1.ximg exists [Sat Jun 8 05:32:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src27.csv [Sat Jun 8 05:32:34 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src27_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 05:32:34 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists [Sat Jun 8 05:32:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src27.csv [Sat Jun 8 05:32:34 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists [Sat Jun 8 05:32:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src27.csv [Sat Jun 8 05:32:34 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 05:32:57 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.853249 pixels away [Sat Jun 8 05:32:57 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 05:32:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 05:32:57 2013] Assessing source extent using major [Sat Jun 8 05:32:57 2013] Source does appear to be extended [Sat Jun 8 05:32:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 07:36:47 2013] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 07:36:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 8 07:36:47 2013] Initial guess for spatial extent in simple fitting = 13.89" [Sat Jun 8 07:36:47 2013] source mask rpix=3.2, npix_max = 54, mask sum = 41, frac = 0.751 [Sat Jun 8 07:36:47 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 13.89" [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src25.ximg exists [Sat Jun 8 08:20:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src25.csv [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src25_1.ximg exists [Sat Jun 8 08:20:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src25.csv [Sat Jun 8 08:20:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src25_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Sat Jun 8 08:20:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src25.csv [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Sat Jun 8 08:20:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src25.csv [Sat Jun 8 08:20:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 08:20:29 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.166063 pixels away [Sat Jun 8 08:20:29 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 08:20:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 08:20:29 2013] Assessing source extent using major [Sat Jun 8 08:20:29 2013] Source does appear to be extended [Sat Jun 8 08:20:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 10:07:13 2013] XMMSAS src. selection expression = ellipse(15465.894211, 40460.012115, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 10:07:13 2013] Writing source region out to fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src2_src.reg [Sat Jun 8 10:07:13 2013] Extracting stamp from image fullrun_mos2_xmm0601930101_pi300-10000_cl_sm2.00.img.gz, (141, 428) - (216, 503) [Sat Jun 8 10:07:13 2013] XMMSAS bgd. selection expression = annulus(15465.894211, 40460.012115, 1087.500000, 2175.000000, X, Y) [Sat Jun 8 10:07:13 2013] Writing fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src2.gif [Sat Jun 8 10:13:22 2013] Mean detx,y = (5493.50, 15560.81) [Sat Jun 8 10:13:23 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 8 10:13:40 2013] Binned source spectrum to 10 counts/bin [Sat Jun 8 10:13:40 2013] Setting source spectrum file to fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Sat Jun 8 10:13:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src2_bgd.pi.gz [Sat Jun 8 10:20:12 2013] Not generating rmf since there are only 45 counts [Sat Jun 8 10:20:12 2013] rmf not generated due to insufficient counts [Sat Jun 8 10:21:44 2013] Updating aperture counts using extracted products [Sat Jun 8 10:21:44 2013] Total counts from fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 123.00 [Sat Jun 8 10:21:44 2013] Total counts from fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 551.00 [Sat Jun 8 10:21:44 2013] Got source and background scale factors 855702.000000, 5649765.000000 [Sat Jun 8 10:21:44 2013] User source parameters: Position = (178.3, 465.6) = 10 58 47.24 1 46 44.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 39.5 +/- 12.1 Background aperture counts = 83.5 Rate = 0.001 +/- 0.0003 [Sat Jun 8 10:21:44 2013] Updating counts from extracted products [Sat Jun 8 10:21:44 2013] Set source signif. to 39.55/9.14 = 4.33 [Sat Jun 8 10:21:45 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 10:21:45 2013] Using photon index=1.80, rate=0.001, arf fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src2.arf [Sat Jun 8 10:21:45 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 10:21:45 2013] Updating source flux to 5.1e-14 [Sat Jun 8 10:21:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 10:21:48 2013] xmm0601930101/analysis//spectral/fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete