[Sat Jun 8 01:15:11 2013] Detection parameters: Position = (312.8, 330.8) = 10 58 8.22 1 36 56.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 134.0 +/- 16.5 Background counts = 43.3 Rate = 0.004 +/- 0.0004 [Sat Jun 8 01:15:12 2013] Off-axis axis estimate = 2.57' [Sat Jun 8 03:50:27 2013] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 03:50:27 2013] Initial guess for spatial extent in simple fitting = 7.71" [Sat Jun 8 03:50:27 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774 [Sat Jun 8 03:50:27 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.71" [Sat Jun 8 05:32:33 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src11.ximg exists [Sat Jun 8 05:32:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src11.csv [Sat Jun 8 05:32:33 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src11_1.ximg exists [Sat Jun 8 05:32:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src11.csv [Sat Jun 8 05:32:33 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 05:32:34 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Sat Jun 8 05:32:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src11.csv [Sat Jun 8 05:32:34 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Sat Jun 8 05:32:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src11.csv [Sat Jun 8 05:32:34 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 05:32:57 2013] Source 15 is offset by 3.966204 and 4.010545 pixels which is larger than 2 X fitted extent = 0.836786 x 0.836786, not incorporating fit results [Sat Jun 8 05:32:57 2013] Spatial fit model total counts = 677.409000, observed total counts = 602.000000 [Sat Jun 8 05:32:57 2013] Poor agreement between spatial fit and data for source 15 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 8 05:32:57 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 05:32:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 05:32:57 2013] Assessing source extent using major [Sat Jun 8 05:32:57 2013] Source does appear to be extended [Sat Jun 8 05:32:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 07:36:47 2013] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 07:36:47 2013] Initial guess for spatial extent in simple fitting = 7.71" [Sat Jun 8 07:36:47 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774 [Sat Jun 8 07:36:47 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.71" [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src11.ximg exists [Sat Jun 8 08:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src11.csv [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src11_1.ximg exists [Sat Jun 8 08:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src11.csv [Sat Jun 8 08:20:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src11_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists [Sat Jun 8 08:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src11.csv [Sat Jun 8 08:20:12 2013] fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists [Sat Jun 8 08:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src11.csv [Sat Jun 8 08:20:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 08:20:29 2013] Source 15 is offset by 3.908112 and 4.537465 pixels which is larger than 2 X fitted extent = 0.886533 x 0.886533, not incorporating fit results [Sat Jun 8 08:20:29 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 08:20:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 08:20:29 2013] Assessing source extent using major [Sat Jun 8 08:20:29 2013] Source does appear to be extended [Sat Jun 8 08:20:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 10:07:13 2013] XMMSAS src. selection expression = ellipse(27165.069733, 28733.119415, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 10:07:13 2013] Writing source region out to fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src15_src.reg [Sat Jun 8 10:07:13 2013] Extracting stamp from image fullrun_mos2_xmm0601930101_pi300-10000_cl_sm2.00.img.gz, (275, 293) - (350, 368) [Sat Jun 8 10:07:13 2013] XMMSAS bgd. selection expression = annulus(27165.069733, 28733.119415, 1087.500000, 2175.000000, X, Y) && !ellipse(26288.574000, 27901.188400, 308.642409, 308.642409, 0.000000, X, Y) && !ellipse(24848.985800, 28582.492400, 1131.072033, 175.024005, 311.480400, X, Y) && !ellipse(25732.176971, 28031.249146, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 8 10:07:13 2013] Writing fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src15.gif [Sat Jun 8 10:10:07 2013] Mean detx,y = (-1051.44, 531.60) [Sat Jun 8 10:10:08 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 8 10:10:16 2013] Binned source spectrum to 10 counts/bin [Sat Jun 8 10:10:16 2013] Setting source spectrum file to fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Sat Jun 8 10:10:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src15_bgd.pi.gz [Sat Jun 8 10:18:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 10:18:58 2013] rmf not generated due to insufficient counts [Sat Jun 8 10:21:42 2013] Updating aperture counts using extracted products [Sat Jun 8 10:21:42 2013] Total counts from fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 443.00 [Sat Jun 8 10:21:42 2013] Total counts from fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 2338.00 [Sat Jun 8 10:21:42 2013] Got source and background scale factors 1194296.000000, 8950480.000000 [Sat Jun 8 10:21:42 2013] User source parameters: Position = (312.8, 330.8) = 10 58 8.22 1 36 56.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 131.0 +/- 22.1 Background aperture counts = 312.0 Rate = 0.003 +/- 0.0006 [Sat Jun 8 10:21:42 2013] Updating counts from extracted products [Sat Jun 8 10:21:42 2013] Set source signif. to 131.03/17.66 = 7.42 [Sat Jun 8 10:21:44 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 10:21:44 2013] Using photon index=1.80, rate=0.00331, arf fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src15.arf [Sat Jun 8 10:21:44 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 10:21:44 2013] Updating source flux to 3.4e-14 [Sat Jun 8 10:21:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 10:21:48 2013] xmm0601930101/analysis//spectral/fullrun_mos2_xmm0601930101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete