[Sat Jun  8 01:14:27 2013] Detection parameters:
  Position = (238.9, 290.0) = 10 58 29.65 1 33 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8691.2 +/- 108.3
  Background counts = 29.5
  Rate = 0.4 +/- 0.004

[Sat Jun  8 01:14:28 2013] Off-axis axis estimate = 4.36'
[Sat Jun  8 03:06:01 2013] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 03:06:01 2013] Initial guess for spatial extent in simple fitting = 8.61"
[Sat Jun  8 03:06:01 2013] source mask rpix=2.0, npix_max = 24, mask sum = 13, frac = 0.529
[Sat Jun  8 03:06:01 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.61"
[Sat Jun  8 03:50:26 2013] fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  8 03:50:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_src1.csv
[Sat Jun  8 03:50:26 2013] fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  8 03:50:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_src1.csv
[Sat Jun  8 03:50:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 03:50:27 2013] fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  8 03:50:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun  8 03:50:27 2013] fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  8 03:50:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun  8 03:50:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601930101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 05:32:53 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.928609 pixels away
[Sat Jun  8 05:32:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 05:32:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 05:32:53 2013] Assessing source extent using major
[Sat Jun  8 05:32:53 2013] Source does appear to be extended
[Sat Jun  8 05:32:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 07:05:53 2013] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 07:05:53 2013] Initial guess for spatial extent in simple fitting = 8.61"
[Sat Jun  8 07:05:53 2013] source mask rpix=2.0, npix_max = 24, mask sum = 13, frac = 0.529
[Sat Jun  8 07:05:53 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.61"
[Sat Jun  8 07:36:46 2013] fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  8 07:36:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_src1.csv
[Sat Jun  8 07:36:46 2013] fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  8 07:36:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_src1.csv
[Sat Jun  8 07:36:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 07:36:47 2013] fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  8 07:36:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  8 07:36:47 2013] fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  8 07:36:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  8 07:36:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601930101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 08:20:24 2013] Spatial fit model total counts = 9998.570000, observed total counts = 7865.000000
[Sat Jun  8 08:20:24 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 08:20:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 08:20:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 08:20:24 2013] Assessing source extent using major
[Sat Jun  8 08:20:24 2013] Source does appear to be extended
[Sat Jun  8 08:20:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:55:29 2013] Counts = 8691.231445, rescaling region sizes by 2.000000
[Sat Jun  8 09:55:29 2013] XMMSAS src. selection expression = ellipse(20739.140823, 25185.347137, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun  8 09:55:29 2013] Writing source region out to fullrun_mos1_xmm0601930101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  8 09:55:29 2013] Extracting stamp from image fullrun_mos1_xmm0601930101_pi300-10000_cl_sm2.00.img.gz, (164, 215) - (314, 365)
[Sat Jun  8 09:55:29 2013] XMMSAS bgd. selection expression = annulus(20739.140823, 25185.347137, 4350.000000, 8700.000000, X, Y) && !ellipse(26312.083678, 27899.610400, 346.715210, 346.715210, 0.000000, X, Y) && !ellipse(27143.934200, 28695.984200, 360.343210, 360.343210, 0.000000, X, Y) && !ellipse(25048.330400, 28712.470200, 500.173614, 220.303206, 332.515600, X, Y) && !ellipse(14205.498400, 31005.088000, 1866.048054, 528.724815, 84.114330, X, Y) && !ellipse(20308.205804, 30225.492800, 441.498413, 200.640006, 39.337979, X, Y) && !ellipse(23891.658040, 28255.392200, 482.762414, 482.762414, 0.000000, X, Y) && !ellipse(25743.495361, 28035.502502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14245.743637, 30565.726837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29156.545200, 29354.314600, 1011.160029, 445.644013, 237.883253, X, Y) && !ellipse(27345.067444, 27366.570526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21054.293400, 17110.789400, 751.636822, 751.636822, 0.000000, X, Y)
[Sat Jun  8 09:55:29 2013] Writing fullrun_mos1_xmm0601930101_pi300-10000_pass1_cl_src1.gif
[Sat Jun  8 09:55:35 2013] Mean detx,y = (-187.25, -6402.38) 
[Sat Jun  8 09:55:36 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  8 09:57:12 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  8 09:57:12 2013] Setting source spectrum file to fullrun_mos1_xmm0601930101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  8 09:57:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0601930101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  8 10:01:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 10:01:57 2013] rmf not generated due to insufficient counts
[Sat Jun  8 10:21:38 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:21:38 2013] Total counts from fullrun_mos1_xmm0601930101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 8771.00
[Sat Jun  8 10:21:38 2013] Total counts from fullrun_mos1_xmm0601930101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 23341.00
[Sat Jun  8 10:21:38 2013] Got source and background scale factors 4271196.000000, 149433427.000000
[Sat Jun  8 10:21:38 2013] User source parameters:
  Position = (238.9, 290.0) = 10 58 29.65 1 33 58.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 8103.9 +/- 94.7
  Background aperture counts = 667.1
  Rate = 0.2 +/- 0.002

[Sat Jun  8 10:21:38 2013] Updating counts from extracted products
[Sat Jun  8 10:21:38 2013] Set source signif. to 8103.85/25.83 = 313.75
[Sat Jun  8 10:21:41 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:21:41 2013] Using photon index=1.80, rate=0.205, arf fullrun_mos1_xmm0601930101_pi300-10000_pass1_cl_src1.arf
[Sat Jun  8 10:21:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:21:41 2013] Updating source flux to 3.1e-12
[Sat Jun  8 10:21:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 10:21:47 2013] xmm0601930101/analysis//spectral/fullrun_mos1_xmm0601930101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete