[Fri Dec  2 06:27:27 2011] Detection parameters:
  Position = (395.0, 139.3) = 17 0 45.34 51 39 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.2 +/- 18.7
  Background counts = 55.5
  Rate = 0.009 +/- 0.001

[Fri Dec  2 06:27:28 2011] Off-axis axis estimate = 13.49'
[Fri Dec  2 06:29:38 2011] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 06:29:38 2011] Initial guess for spatial extent in simple fitting = 13.18"
[Fri Dec  2 06:29:38 2011] source mask rpix=3.0, npix_max = 49, mask sum = 55, frac = 1.104
[Fri Dec  2 06:29:38 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 13.18"
[Fri Dec  2 06:58:46 2011] fullrun_pn_xmm0601870201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Dec  2 06:58:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601870201_pi300-10000_cl_pass0_src5.csv
[Fri Dec  2 06:58:46 2011] fullrun_pn_xmm0601870201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Dec  2 06:58:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601870201_pi300-10000_cl_pass0_src5.csv
[Fri Dec  2 06:58:46 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601870201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601870201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 06:58:46 2011] fullrun_pn_xmm0601870201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Dec  2 06:58:46 2011] fullrun_pn_xmm0601870201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Dec  2 06:58:46 2011] Fit fullrun_pn_xmm0601870201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Dec  2 07:40:35 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.616506 pixels away
[Fri Dec  2 07:40:35 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 07:40:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 07:40:35 2011] Assessing source extent using major
[Fri Dec  2 07:40:35 2011] Source does appear to be extended
[Fri Dec  2 07:40:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 07:40:46 2011] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 07:40:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec  2 07:40:46 2011] Initial guess for spatial extent in simple fitting = 13.18"
[Fri Dec  2 07:40:46 2011] source mask rpix=3.0, npix_max = 49, mask sum = 55, frac = 1.104
[Fri Dec  2 07:40:46 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 13.18"
[Fri Dec  2 08:07:52 2011] fullrun_pn_xmm0601870201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Dec  2 08:07:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601870201_pi300-10000_cl_pass1_src5.csv
[Fri Dec  2 08:07:52 2011] fullrun_pn_xmm0601870201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Dec  2 08:07:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601870201_pi300-10000_cl_pass1_src5.csv
[Fri Dec  2 08:07:52 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601870201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601870201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 08:07:52 2011] fullrun_pn_xmm0601870201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Dec  2 08:07:52 2011] fullrun_pn_xmm0601870201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Dec  2 08:07:52 2011] Fit fullrun_pn_xmm0601870201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Dec  2 08:44:10 2011] Spatial fit model total counts = 395.754000, observed total counts = 396.000000
[Fri Dec  2 08:44:10 2011] Offset between fit and detection position for source 5 = 0.230588 pixels
[Fri Dec  2 08:44:10 2011] 401.679900 total counts/ 303.684000 bgd. counts: snr = 5.623374
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.230588 pixels
  Position = (394.8, 139.5) = 17 0 45.43 51 39 15.5
  Extent = 5.6 (4.6-6.8)", rotation angle = 0
  Source counts = 98.0 +/- 20.0
  Background counts = 303.7
  Rate = 0.008 +/- 0.002
[Fri Dec  2 08:44:10 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 08:44:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 08:44:10 2011] Assessing source extent using major axis lower bound
[Fri Dec  2 08:44:10 2011] Source does appear to be extended
[Fri Dec  2 08:44:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 08:44:22 2011] XMMSAS src. selection expression = ellipse(34299.641800, 12083.911400, 335.076010, 335.076010, 0.000000, X, Y)
[Fri Dec  2 08:44:22 2011] Writing source region out to fullrun_pn_xmm0601870201_pi300-10000_pass1_cl_src5_src.reg
[Fri Dec  2 08:44:22 2011] Extracting stamp from image fullrun_pn_xmm0601870201_pi300-10000_cl_sm2.00.img.gz, (376, 120) - (414, 159)
[Fri Dec  2 08:44:22 2011] XMMSAS bgd. selection expression = annulus(34299.641800, 12083.911400, 558.460016, 1116.920032, X, Y)
[Fri Dec  2 08:44:22 2011] Writing fullrun_pn_xmm0601870201_pi300-10000_pass1_cl_src5.gif
[Fri Dec  2 08:46:53 2011] Mean detx,y = (8050.47, -11885.78) 
[Fri Dec  2 08:46:56 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec  2 08:47:18 2011] Binned source spectrum to 10 counts/bin
[Fri Dec  2 08:47:18 2011] Setting source spectrum file to fullrun_pn_xmm0601870201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Dec  2 08:47:18 2011] Setting bgd. spectrum file to fullrun_pn_xmm0601870201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Dec  2 08:58:18 2011] Not generating rmf since there are only 97 counts
[Fri Dec  2 08:58:18 2011] rmf not generated due to insufficient counts
[Fri Dec  2 09:18:00 2011] Updating aperture counts using extracted products
[Fri Dec  2 09:18:00 2011] Error reading totcts from fullrun_pn_xmm0601870201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Dec  2 09:18:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec  2 09:18:00 2011] Using photon index=1.80, rate=0.00752, arf fullrun_pn_xmm0601870201_pi300-10000_pass1_cl_src5.arf
[Fri Dec  2 09:18:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec  2 09:18:00 2011] Updating source flux to 6e-14
[Fri Dec  2 09:18:09 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Dec  2 09:18:19 2011] xmm0601870201/analysis//spectral/fullrun_pn_xmm0601870201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete