[Fri Dec  2 06:28:06 2011] Detection parameters:
  Position = (151.7, 325.2) = 17 2 39.42 51 52 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.2 +/- 14.4
  Background counts = 12.2
  Rate = 0.006 +/- 0.0007

[Fri Dec  2 06:28:07 2011] Off-axis axis estimate = 10.81'
[Fri Dec  2 07:14:05 2011] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 07:14:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec  2 07:14:05 2011] Initial guess for spatial extent in simple fitting = 11.84"
[Fri Dec  2 07:14:05 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.012
[Fri Dec  2 07:14:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 11.84"
[Fri Dec  2 07:40:30 2011] fullrun_mos2_xmm0601870201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec  2 07:40:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601870201_pi300-10000_cl_pass0_src1.csv
[Fri Dec  2 07:40:30 2011] fullrun_mos2_xmm0601870201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec  2 07:40:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601870201_pi300-10000_cl_pass0_src1.csv
[Fri Dec  2 07:40:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601870201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601870201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 07:40:30 2011] fullrun_mos2_xmm0601870201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec  2 07:40:30 2011] fullrun_mos2_xmm0601870201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec  2 07:40:30 2011] Fit fullrun_mos2_xmm0601870201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec  2 07:40:40 2011] Spatial fit model total counts = 347.999000, observed total counts = 348.000000
[Fri Dec  2 07:40:40 2011] Offset between fit and detection position for source 1 = 0.684159 pixels
[Fri Dec  2 07:40:40 2011] 346.314000 total counts/ 223.833000 bgd. counts: snr = 8.186658
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.684159 pixels
  Position = (152.2, 325.5) = 17 2 39.16 51 52 44.3
  Extent = 9.3 (7.5-11.4)", rotation angle = 0
  Source counts = 122.5 +/- 18.6
  Background counts = 223.8
  Rate = 0.006 +/- 0.001
[Fri Dec  2 07:40:40 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 07:40:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 07:40:40 2011] Assessing source extent using major axis lower bound
[Fri Dec  2 07:40:40 2011] Source does appear to be extended
[Fri Dec  2 07:40:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 08:20:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec  2 08:20:39 2011] Initial guess for spatial extent in simple fitting = 9.25"
[Fri Dec  2 08:20:39 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.905
[Fri Dec  2 08:20:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.25"
[Fri Dec  2 08:44:05 2011] fullrun_mos2_xmm0601870201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec  2 08:44:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601870201_pi300-10000_cl_pass1_src1.csv
[Fri Dec  2 08:44:05 2011] fullrun_mos2_xmm0601870201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec  2 08:44:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601870201_pi300-10000_cl_pass1_src1.csv
[Fri Dec  2 08:44:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601870201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601870201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 08:44:06 2011] fullrun_mos2_xmm0601870201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec  2 08:44:06 2011] fullrun_mos2_xmm0601870201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec  2 08:44:06 2011] Fit fullrun_mos2_xmm0601870201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec  2 08:44:15 2011] Warning, spatial fit 1 centroid is now closest to src. 9
[Fri Dec  2 08:44:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 08:44:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 08:44:15 2011] Assessing source extent using major axis lower bound
[Fri Dec  2 08:44:15 2011] Source does appear to be extended
[Fri Dec  2 08:44:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 09:09:04 2011] XMMSAS src. selection expression = ellipse(13196.874600, 28273.855600, 555.204016, 555.204016, 0.000000, X, Y)
[Fri Dec  2 09:09:04 2011] Writing source region out to fullrun_mos2_xmm0601870201_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec  2 09:09:04 2011] Extracting stamp from image fullrun_mos2_xmm0601870201_pi300-10000_cl_sm2.00.img.gz, (120, 294) - (184, 357)
[Fri Dec  2 09:09:04 2011] XMMSAS bgd. selection expression = annulus(13196.874600, 28273.855600, 925.340027, 1850.680053, X, Y) && !ellipse(15242.180115, 28537.388000, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec  2 09:09:04 2011] Writing fullrun_mos2_xmm0601870201_pi300-10000_pass1_cl_src1.gif
[Fri Dec  2 09:09:06 2011] Mean detx,y = (-2051.39, -14144.62) 
[Fri Dec  2 09:09:07 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec  2 09:09:15 2011] Binned source spectrum to 10 counts/bin
[Fri Dec  2 09:09:15 2011] Setting source spectrum file to fullrun_mos2_xmm0601870201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec  2 09:09:15 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601870201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec  2 09:18:01 2011] Updating aperture counts using extracted products
[Fri Dec  2 09:18:01 2011] Error reading totcts from fullrun_mos2_xmm0601870201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec  2 09:18:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec  2 09:18:01 2011] Using photon index=1.80, rate=0.00633, arf fullrun_mos2_xmm0601870201_pi300-10000_pass1_cl_src1.arf
[Fri Dec  2 09:18:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec  2 09:18:01 2011] Updating source flux to 1.4e-13
[Fri Dec  2 09:18:09 2011] Reading fit data from xmm0601870201/analysis//spectral/fullrun_mos2_xmm0601870201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Dec  2 09:18:09 2011] Spectral fit parameter nH value = 4.65153e+12
[Fri Dec  2 09:18:09 2011] Spectral fit parameter PhoIndex value = 1.69059
[Fri Dec  2 09:18:09 2011] Failed to get F(0.3-8.0) from xmm0601870201/analysis//spectral/fullrun_mos2_xmm0601870201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Dec  2 09:18:09 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec  2 09:18:09 2011] Using Nh = 4.7e+12, photon index=1.69, rate=0.00633, arf fullrun_mos2_xmm0601870201_pi300-10000_pass1_cl_src1.arf
[Fri Dec  2 09:18:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec  2 09:18:09 2011] Updating source flux to 1.5e-13