[Thu Dec 29 16:12:10 2011] Detection parameters: Position = (293.3, 149.8) = 17 1 34.96 51 39 47.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 142.8 +/- 16.3 Background counts = 25.3 Rate = 0.008 +/- 0.0009 [Thu Dec 29 16:12:10 2011] Off-axis axis estimate = 10.78' [Thu Dec 29 17:16:48 2011] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting [Thu Dec 29 17:16:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Dec 29 17:16:48 2011] Initial guess for spatial extent in simple fitting = 11.82" [Thu Dec 29 17:16:48 2011] source mask rpix=2.7, npix_max = 41, mask sum = 23, frac = 0.556 [Thu Dec 29 17:16:48 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 11.82" [Thu Dec 29 17:46:10 2011] fullrun_mos2_xmm0601870101_pi300-10000_cl_pass0_src2.ximg exists [Thu Dec 29 17:46:10 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601870101_pi300-10000_cl_pass0_src2.csv [Thu Dec 29 17:46:10 2011] fullrun_mos2_xmm0601870101_pi300-10000_cl_pass0_src2_1.ximg exists [Thu Dec 29 17:46:10 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601870101_pi300-10000_cl_pass0_src2.csv [Thu Dec 29 17:46:10 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601870101_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601870101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Dec 29 17:46:10 2011] fullrun_mos2_xmm0601870101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Thu Dec 29 17:46:10 2011] fullrun_mos2_xmm0601870101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Thu Dec 29 17:46:10 2011] Fit fullrun_mos2_xmm0601870101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Thu Dec 29 17:46:25 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.465628 pixels away [Thu Dec 29 17:46:25 2011] Vigneting correction estimate = 1.000000 [Thu Dec 29 17:46:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Dec 29 17:46:25 2011] Assessing source extent using major [Thu Dec 29 17:46:25 2011] Source does appear to be extended [Thu Dec 29 17:46:25 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Dec 29 18:37:33 2011] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting [Thu Dec 29 18:37:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Dec 29 18:37:33 2011] Initial guess for spatial extent in simple fitting = 11.82" [Thu Dec 29 18:37:33 2011] source mask rpix=2.7, npix_max = 41, mask sum = 23, frac = 0.556 [Thu Dec 29 18:37:33 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 11.82" [Thu Dec 29 19:06:08 2011] fullrun_mos2_xmm0601870101_pi300-10000_cl_pass1_src2.ximg exists [Thu Dec 29 19:06:08 2011] fullrun_mos2_xmm0601870101_pi300-10000_cl_pass1_src2_1.ximg exists [Thu Dec 29 19:06:08 2011] Fit fullrun_mos2_xmm0601870101_pi300-10000_cl_pass1_src2 appears to have run properly [Thu Dec 29 19:06:08 2011] fullrun_mos2_xmm0601870101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Thu Dec 29 19:06:08 2011] fullrun_mos2_xmm0601870101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Thu Dec 29 19:06:08 2011] Fit fullrun_mos2_xmm0601870101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Thu Dec 29 19:06:21 2011] Spatial fit model total counts = 306.925000, observed total counts = 307.000000 [Thu Dec 29 19:06:21 2011] Offset between fit and detection position for source 2 = 1.021206 pixels [Thu Dec 29 19:06:21 2011] 307.643000 total counts/ 221.812000 bgd. counts: snr = 5.763040 Spatial fit parameters: Offset between fit and detection position for source 2 = 1.021206 pixels Position = (294.4, 149.8) = 17 1 34.48 51 39 48.0 Extent = 5.6 (4.4-6.9)", rotation angle = 0 Source counts = 85.8 +/- 17.5 Background counts = 221.8 Rate = 0.005 +/- 0.001 [Thu Dec 29 19:06:21 2011] Vigneting correction estimate = 1.000000 [Thu Dec 29 19:06:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Dec 29 19:06:21 2011] Assessing source extent using major axis lower bound [Thu Dec 29 19:06:21 2011] Source does appear to be extended [Thu Dec 29 19:06:21 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Dec 29 19:34:52 2011] XMMSAS src. selection expression = ellipse(25561.051000, 12988.299600, 337.527610, 337.527610, 0.000000, X, Y) [Thu Dec 29 19:34:52 2011] Writing source region out to fullrun_mos2_xmm0601870101_pi300-10000_pass1_cl_src2_src.reg [Thu Dec 29 19:34:52 2011] Extracting stamp from image fullrun_mos2_xmm0601870101_pi300-10000_cl_sm2.00.img.gz, (275, 130) - (314, 169) [Thu Dec 29 19:34:52 2011] XMMSAS bgd. selection expression = annulus(25561.051000, 12988.299600, 562.546016, 1125.092032, X, Y) [Thu Dec 29 19:34:52 2011] Writing fullrun_mos2_xmm0601870101_pi300-10000_pass1_cl_src2.gif [Thu Dec 29 19:35:37 2011] Mean detx,y = (-11482.34, 879.62) [Thu Dec 29 19:35:40 2011] Setting backscal keywords in source and bgd. spectrum [Thu Dec 29 19:35:54 2011] Binned source spectrum to 10 counts/bin [Thu Dec 29 19:35:55 2011] Setting source spectrum file to fullrun_mos2_xmm0601870101_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Thu Dec 29 19:35:55 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601870101_pi300-10000_pass1_cl_src2_bgd.pi.gz [Thu Dec 29 19:40:00 2011] Not generating rmf since there are only 85 counts [Thu Dec 29 19:40:00 2011] rmf not generated due to insufficient counts [Thu Dec 29 19:41:26 2011] Updating aperture counts using extracted products [Thu Dec 29 19:41:26 2011] Error reading totcts from fullrun_mos2_xmm0601870101_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Thu Dec 29 19:41:26 2011] Calculating source flux in energy range 0.30-8.00 [Thu Dec 29 19:41:26 2011] Using photon index=1.80, rate=0.00507, arf fullrun_mos2_xmm0601870101_pi300-10000_pass1_cl_src2.arf [Thu Dec 29 19:41:26 2011] Assuming count rate is from the 0.30-10.00 bandpass [Thu Dec 29 19:41:26 2011] Updating source flux to 1.1e-13 [Thu Dec 29 19:41:43 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting [Thu Dec 29 19:41:44 2011] xmm0601870101/analysis//spectral/fullrun_mos2_xmm0601870101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete