[Tue Jun 12 13:16:11 2012] Detection parameters:
  Position = (157.3, 286.9) = 21 13 3.15 -49 18 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 489.3 +/- 29.5
  Background counts = 58.2
  Rate = 0.02 +/- 0.001

[Tue Jun 12 13:16:11 2012] Off-axis axis estimate = 10.26'
[Tue Jun 12 13:18:25 2012] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 13:18:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 13:18:25 2012] Initial guess for spatial extent in simple fitting = 11.56"
[Tue Jun 12 13:18:25 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.903
[Tue Jun 12 13:18:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.56"
[Tue Jun 12 13:51:39 2012] fullrun_pn_xmm0601830501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 13:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601830501_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 13:51:39 2012] fullrun_pn_xmm0601830501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 13:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601830501_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 13:51:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601830501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601830501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 13:51:39 2012] fullrun_pn_xmm0601830501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 13:51:39 2012] fullrun_pn_xmm0601830501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 13:51:39 2012] Fit fullrun_pn_xmm0601830501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 14:21:44 2012] Spatial fit model total counts = 749.697000, observed total counts = 696.000000
[Tue Jun 12 14:21:44 2012] Offset between fit and detection position for source 1 = 0.186866 pixels
[Tue Jun 12 14:21:44 2012] 755.002000 total counts/ 500.190000 bgd. counts: snr = 11.393375
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.186866 pixels
  Position = (157.5, 286.8) = 21 13 3.07 -49 18 52.9
  Extent = 5.6 (5.0-6.5)", rotation angle = 0
  Source counts = 254.8 +/- 27.5
  Background counts = 500.2
  Rate = 0.01 +/- 0.001
[Tue Jun 12 14:21:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 14:21:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 14:21:44 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 14:21:44 2012] Source does appear to be extended
[Tue Jun 12 14:21:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 14:21:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 14:21:53 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Tue Jun 12 14:21:53 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.929
[Tue Jun 12 14:21:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.64"
[Tue Jun 12 14:51:12 2012] fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 14:51:12 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 14:51:12 2012] fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 14:51:12 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 14:51:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 14:51:12 2012] fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 14:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 12 14:51:12 2012] fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 14:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 12 14:51:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601830501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 15:16:41 2012] Warning, spatial fit 1 centroid is now closest to src. 19
[Tue Jun 12 15:16:41 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 15:16:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 15:16:41 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 15:16:41 2012] Source does appear to be extended
[Tue Jun 12 15:16:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 15:16:50 2012] XMMSAS src. selection expression = ellipse(13654.631200, 24901.911800, 338.496610, 338.496610, 0.000000, X, Y)
[Tue Jun 12 15:16:50 2012] Writing source region out to fullrun_pn_xmm0601830501_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 12 15:16:50 2012] Extracting stamp from image fullrun_pn_xmm0601830501_pi300-10000_cl_sm2.00.img.gz, (138, 267) - (177, 306)
[Tue Jun 12 15:16:50 2012] XMMSAS bgd. selection expression = annulus(13654.631200, 24901.911800, 564.161016, 1128.322032, X, Y) && !ellipse(14821.958008, 25373.044434, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 15:16:50 2012] Writing fullrun_pn_xmm0601830501_pi300-10000_pass1_cl_src1.gif
[Tue Jun 12 15:16:58 2012] Mean detx,y = (-12305.76, 6460.56) 
[Tue Jun 12 15:17:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 15:17:15 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 15:17:15 2012] Setting source spectrum file to fullrun_pn_xmm0601830501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 15:17:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601830501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 12 15:51:16 2012] Updating aperture counts using extracted products
[Tue Jun 12 15:51:16 2012] Error reading totcts from fullrun_pn_xmm0601830501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 15:51:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 15:51:17 2012] Using photon index=1.80, rate=0.0139, arf fullrun_pn_xmm0601830501_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 15:51:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 15:51:17 2012] Updating source flux to 1.1e-13
[Tue Jun 12 15:51:45 2012] Reading fit data from xmm0601830501/analysis//spectral/fullrun_pn_xmm0601830501_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 12 15:51:45 2012] Spectral fit parameter nH value = 8.9155e+20
[Tue Jun 12 15:51:45 2012] Spectral fit parameter PhoIndex value = 1.89366
[Tue Jun 12 15:51:45 2012] Failed to get F(0.3-8.0) from xmm0601830501/analysis//spectral/fullrun_pn_xmm0601830501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 15:51:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 15:51:45 2012] Using Nh = 8.9e+20, photon index=1.89, rate=0.0139, arf fullrun_pn_xmm0601830501_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 15:51:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 15:51:45 2012] Updating source flux to 1.3e-13