[Tue Jun 12 13:16:42 2012] Detection parameters:
  Position = (194.2, 304.8) = 21 12 46.71 -49 17 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.9 +/- 14.9
  Background counts = 28.6
  Rate = 0.008 +/- 0.001

[Tue Jun 12 13:16:42 2012] Off-axis axis estimate = 7.57'
[Tue Jun 12 14:03:06 2012] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 14:03:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 14:03:06 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Tue Jun 12 14:03:06 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.110
[Tue Jun 12 14:03:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.21"
[Tue Jun 12 14:21:39 2012] fullrun_mos2_xmm0601830501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 14:21:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601830501_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 14:21:39 2012] fullrun_mos2_xmm0601830501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 14:21:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601830501_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 14:21:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601830501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601830501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 14:21:40 2012] fullrun_mos2_xmm0601830501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 14:21:40 2012] fullrun_mos2_xmm0601830501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 14:21:40 2012] Fit fullrun_mos2_xmm0601830501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 14:21:47 2012] Spatial fit model total counts = 280.992000, observed total counts = 281.000000
[Tue Jun 12 14:21:47 2012] Offset between fit and detection position for source 6 = 0.235300 pixels
[Tue Jun 12 14:21:47 2012] 276.753800 total counts/ 184.561000 bgd. counts: snr = 6.786206
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.235300 pixels
  Position = (194.4, 304.7) = 21 12 46.64 -49 17 35.7
  Extent = 6.4 (5.3-7.9)", rotation angle = 0
  Source counts = 92.2 +/- 16.6
  Background counts = 184.6
  Rate = 0.004 +/- 0.0007
[Tue Jun 12 14:21:47 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 14:21:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 14:21:47 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 14:21:47 2012] Source does appear to be extended
[Tue Jun 12 14:21:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 14:59:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 14:59:31 2012] Initial guess for spatial extent in simple fitting = 6.39"
[Tue Jun 12 14:59:31 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.032
[Tue Jun 12 14:59:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.39"
[Tue Jun 12 15:16:38 2012] fullrun_mos2_xmm0601830501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 15:16:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601830501_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 15:16:38 2012] fullrun_mos2_xmm0601830501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 15:16:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601830501_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 15:16:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601830501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601830501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 15:16:38 2012] fullrun_mos2_xmm0601830501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 15:16:38 2012] fullrun_mos2_xmm0601830501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 15:16:38 2012] Fit fullrun_mos2_xmm0601830501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 12 15:16:45 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Tue Jun 12 15:16:45 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 15:16:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 15:16:45 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 15:16:45 2012] Source does appear to be extended
[Tue Jun 12 15:16:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 15:45:06 2012] XMMSAS src. selection expression = ellipse(16864.864400, 26456.585800, 383.262011, 383.262011, 0.000000, X, Y)
[Tue Jun 12 15:45:06 2012] Writing source region out to fullrun_mos2_xmm0601830501_pi300-10000_pass1_cl_src6_src.reg
[Tue Jun 12 15:45:06 2012] Extracting stamp from image fullrun_mos2_xmm0601830501_pi300-10000_cl_sm2.00.img.gz, (172, 283) - (216, 327)
[Tue Jun 12 15:45:06 2012] XMMSAS bgd. selection expression = annulus(16864.864400, 26456.585800, 638.770018, 1277.540037, X, Y)
[Tue Jun 12 15:45:06 2012] Writing fullrun_mos2_xmm0601830501_pi300-10000_pass1_cl_src6.gif
[Tue Jun 12 15:45:08 2012] Mean detx,y = (9900.85, -4167.48) 
[Tue Jun 12 15:45:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 15:45:17 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 15:45:17 2012] Setting source spectrum file to fullrun_mos2_xmm0601830501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 12 15:45:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601830501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun 12 15:49:03 2012] Not generating rmf since there are only 92 counts
[Tue Jun 12 15:49:03 2012] rmf not generated due to insufficient counts
[Tue Jun 12 15:51:17 2012] Updating aperture counts using extracted products
[Tue Jun 12 15:51:17 2012] Error reading totcts from fullrun_mos2_xmm0601830501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 12 15:51:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 15:51:17 2012] Using photon index=1.80, rate=0.0038, arf fullrun_mos2_xmm0601830501_pi300-10000_pass1_cl_src6.arf
[Tue Jun 12 15:51:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 15:51:17 2012] Updating source flux to 8e-14
[Tue Jun 12 15:51:20 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 12 15:51:21 2012] xmm0601830501/analysis//spectral/fullrun_mos2_xmm0601830501_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete