[Mon Feb 13 03:53:54 2012] Detection parameters:
  Position = (292.6, 275.0) = 11 9 41.70 -3 39 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5287.6 +/- 87.1
  Background counts = 6.1
  Rate = 0.5 +/- 0.008

[Mon Feb 13 03:53:55 2012] Off-axis axis estimate = 1.75'
[Mon Feb 13 04:46:51 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 04:46:51 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Mon Feb 13 04:46:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Mon Feb 13 04:46:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Mon Feb 13 04:59:20 2012] fullrun_mos1_xmm0601781701_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 13 04:59:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601781701_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 04:59:20 2012] fullrun_mos1_xmm0601781701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 13 04:59:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601781701_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 04:59:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601781701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601781701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 04:59:20 2012] fullrun_mos1_xmm0601781701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 13 04:59:20 2012] fullrun_mos1_xmm0601781701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 13 04:59:20 2012] Fit fullrun_mos1_xmm0601781701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 13 05:09:17 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.658262 pixels away
[Mon Feb 13 05:09:17 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:09:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:09:17 2012] Assessing source extent using major
[Mon Feb 13 05:09:17 2012] Source does appear to be extended
[Mon Feb 13 05:09:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 05:42:59 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 05:42:59 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Mon Feb 13 05:42:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Mon Feb 13 05:42:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Mon Feb 13 05:55:14 2012] fullrun_mos1_xmm0601781701_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 13 05:55:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601781701_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 05:55:14 2012] fullrun_mos1_xmm0601781701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 13 05:55:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601781701_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 05:55:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601781701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601781701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 05:55:14 2012] fullrun_mos1_xmm0601781701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 13 05:55:14 2012] fullrun_mos1_xmm0601781701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 13 05:55:14 2012] Fit fullrun_mos1_xmm0601781701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 13 05:59:46 2012] Spatial fit model total counts = 4668.940000, observed total counts = 4660.000000
[Mon Feb 13 05:59:46 2012] Offset between fit and detection position for source 1 = 0.033663 pixels
[Mon Feb 13 05:59:46 2012] 4677.070000 total counts/ 1065.950000 bgd. counts: snr = 110.604680
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.033663 pixels
  Position = (292.7, 275.0) = 11 9 41.69 -3 39 27.6
  Extent = 5.4 (5.3-5.6)", rotation angle = 0
  Source counts = 3611.1 +/- 68.4
  Background counts = 1066.0
  Rate = 0.3 +/- 0.006
[Mon Feb 13 05:59:46 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:59:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:59:46 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 05:59:46 2012] Source does appear to be extended
[Mon Feb 13 05:59:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 06:49:24 2012] Counts = 3611.120000, rescaling region sizes by 2.000000
[Mon Feb 13 06:49:24 2012] XMMSAS src. selection expression = ellipse(25413.063600, 23876.742400, 648.334819, 648.334819, 0.000000, X, Y)
[Mon Feb 13 06:49:24 2012] Writing source region out to fullrun_mos1_xmm0601781701_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 13 06:49:24 2012] Extracting stamp from image fullrun_mos1_xmm0601781701_pi300-10000_cl_sm2.00.img.gz, (255, 238) - (330, 312)
[Mon Feb 13 06:49:24 2012] XMMSAS bgd. selection expression = annulus(25413.063600, 23876.742400, 2161.116062, 4322.232124, X, Y) && !ellipse(22268.919000, 21993.397800, 564.960816, 298.608009, 149.992176, X, Y)
[Mon Feb 13 06:49:24 2012] Writing fullrun_mos1_xmm0601781701_pi300-10000_pass1_cl_src1.gif
[Mon Feb 13 06:49:25 2012] Mean detx,y = (320.04, -175.63) 
[Mon Feb 13 06:49:25 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 06:49:34 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 06:49:34 2012] Setting source spectrum file to fullrun_mos1_xmm0601781701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 06:49:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601781701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 13 06:59:47 2012] Updating aperture counts using extracted products
[Mon Feb 13 06:59:47 2012] Error reading totcts from fullrun_mos1_xmm0601781701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 06:59:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 06:59:47 2012] Using photon index=1.80, rate=0.311, arf fullrun_mos1_xmm0601781701_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 06:59:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 06:59:47 2012] Updating source flux to 3.1e-12
[Mon Feb 13 06:59:59 2012] Reading fit data from xmm0601781701/analysis//spectral/fullrun_mos1_xmm0601781701_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 13 06:59:59 2012] Spectral fit parameter nH value = 1.59408e+18
[Mon Feb 13 06:59:59 2012] Spectral fit parameter PhoIndex value = 2.00055
[Mon Feb 13 06:59:59 2012] Failed to get F(0.3-8.0) from xmm0601781701/analysis//spectral/fullrun_mos1_xmm0601781701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 13 06:59:59 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 06:59:59 2012] Using Nh = 1.6e+18, photon index=2.00, rate=0.311, arf fullrun_mos1_xmm0601781701_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 06:59:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 06:59:59 2012] Updating source flux to 2.9e-12