[Mon Mar 12 05:52:34 2012] Detection parameters:
  Position = (275.8, 269.8) = 14 36 39.01 58 47 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.4 +/- 20.1
  Background counts = 91.1
  Rate = 0.01 +/- 0.002

[Mon Mar 12 05:52:34 2012] Off-axis axis estimate = 2.65'
[Mon Mar 12 05:55:18 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 05:55:18 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Mon Mar 12 05:55:18 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Mon Mar 12 05:55:18 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.75"
[Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src21.ximg exists
[Mon Mar 12 07:58:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src21.csv
[Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Mar 12 07:58:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src21.csv
[Mon Mar 12 07:58:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Mar 12 07:58:17 2012] Fit fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Mar 12 09:26:08 2012] Spatial fit model total counts = 465.199000, observed total counts = 465.000000
[Mon Mar 12 09:26:08 2012] Offset between fit and detection position for source 22 = 0.358100 pixels
[Mon Mar 12 09:26:08 2012] 488.252900 total counts/ 419.726000 bgd. counts: snr = 3.344862
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.358100 pixels
  Position = (275.7, 269.5) = 14 36 39.09 58 47 10.3
  Extent = 4.2 (3.5-5.4)", rotation angle = 0
  Source counts = 68.5 +/- 22.1
  Background counts = 419.7
  Rate = 0.01 +/- 0.004
[Mon Mar 12 09:26:08 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 09:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 09:26:08 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 09:26:08 2012] Source does appear to be extended
[Mon Mar 12 09:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 09:26:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 12 09:26:29 2012] Initial guess for spatial extent in simple fitting = 4.21"
[Mon Mar 12 09:26:29 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.043
[Mon Mar 12 09:26:29 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 4.21"
[Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src19.ximg exists
[Mon Mar 12 11:58:12 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src19.csv
[Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Mar 12 11:58:12 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src19.csv
[Mon Mar 12 11:58:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Mar 12 11:58:12 2012] Fit fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Mar 12 13:09:14 2012] Spatial fit model total counts = 396.814000, observed total counts = 396.000000
[Mon Mar 12 13:09:14 2012] Offset between fit and detection position for source 22 = 0.018502 pixels
[Mon Mar 12 13:09:14 2012] 413.870400 total counts/ 341.058000 bgd. counts: snr = 3.942677
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.018502 pixels
  Position = (275.7, 269.5) = 14 36 39.09 58 47 10.4
  Extent = 4.4 (3.6-5.7)", rotation angle = 0
  Source counts = 72.8 +/- 20.3
  Background counts = 341.1
  Rate = 0.01 +/- 0.004
[Mon Mar 12 13:09:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 13:09:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 13:09:14 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 13:09:14 2012] Source does appear to be extended
[Mon Mar 12 13:09:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 13:09:32 2012] XMMSAS src. selection expression = ellipse(23937.106400, 23397.383600, 263.933408, 263.933408, 0.000000, X, Y)
[Mon Mar 12 13:09:32 2012] Writing source region out to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src22_src.reg
[Mon Mar 12 13:09:32 2012] Extracting stamp from image fullrun_pn_xmm0601781401_pi300-10000_cl_sm2.00.img.gz, (261, 254) - (291, 285)
[Mon Mar 12 13:09:32 2012] XMMSAS bgd. selection expression = annulus(23937.106400, 23397.383600, 439.889013, 879.778025, X, Y) && !ellipse(24834.000000, 25209.652000, 2242.384065, 2242.384065, 0.000000, X, Y)
[Mon Mar 12 13:09:32 2012] Writing fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src22.gif
[Mon Mar 12 14:09:33 2012] Mean detx,y = (2148.96, 1564.99) 
[Mon Mar 12 14:09:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 14:09:57 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 14:09:58 2012] Setting source spectrum file to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Mar 12 14:09:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Mar 13 14:29:18 2012] Not generating rmf since there are only 72 counts
[Tue Mar 13 14:29:18 2012] rmf not generated due to insufficient counts
[Tue Mar 13 15:45:02 2012] Updating aperture counts using extracted products
[Tue Mar 13 15:45:02 2012] Error reading totcts from fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Mar 13 15:45:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 15:45:04 2012] Using photon index=1.80, rate=0.0126, arf fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src22.arf
[Tue Mar 13 15:45:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 15:45:04 2012] Updating source flux to 4.3e-14
[Tue Mar 13 15:46:24 2012] Source 22 has fewer than 100.000000 counts, skipping spectral fitting