[Mon Mar 12 05:52:33 2012] Detection parameters:
  Position = (278.4, 212.3) = 14 36 37.57 58 43 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2685.7 +/- 62.5
  Background counts = 74.6
  Rate = 0.3 +/- 0.008

[Mon Mar 12 05:52:34 2012] Off-axis axis estimate = 6.41'
[Mon Mar 12 05:55:18 2012] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 05:55:18 2012] Initial guess for spatial extent in simple fitting = 9.64"
[Mon Mar 12 05:55:18 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.848
[Mon Mar 12 05:55:18 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.64"
[Mon Mar 12 07:58:16 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src2.ximg exists
[Mon Mar 12 07:58:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src2.csv
[Mon Mar 12 07:58:16 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Mar 12 07:58:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src2.csv
[Mon Mar 12 07:58:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Mar 12 07:58:17 2012] Fit fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Mar 12 09:26:08 2012] Spatial fit model total counts = 2397.010000, observed total counts = 2347.000000
[Mon Mar 12 09:26:08 2012] Offset between fit and detection position for source 2 = 0.123884 pixels
[Mon Mar 12 09:26:08 2012] 2411.252000 total counts/ 499.532000 bgd. counts: snr = 85.534757
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.123884 pixels
  Position = (278.4, 212.4) = 14 36 37.56 58 43 2.0
  Extent = 5.8 (5.5-6.0)", rotation angle = 0
  Source counts = 1911.7 +/- 49.1
  Background counts = 499.5
  Rate = 0.3 +/- 0.009
[Mon Mar 12 09:26:08 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 09:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 09:26:08 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 09:26:08 2012] Source does appear to be extended
[Mon Mar 12 09:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 09:26:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 12 09:26:29 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Mon Mar 12 09:26:29 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.672
[Mon Mar 12 09:26:29 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.78"
[Mon Mar 12 11:58:11 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src2.ximg exists
[Mon Mar 12 11:58:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src2.csv
[Mon Mar 12 11:58:11 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Mar 12 11:58:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src2.csv
[Mon Mar 12 11:58:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Mar 12 11:58:12 2012] Fit fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Mar 12 13:09:14 2012] Spatial fit model total counts = 2396.890000, observed total counts = 2347.000000
[Mon Mar 12 13:09:14 2012] Offset between fit and detection position for source 2 = 0.000121 pixels
[Mon Mar 12 13:09:14 2012] 2411.098000 total counts/ 498.108000 bgd. counts: snr = 85.713838
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000121 pixels
  Position = (278.4, 212.4) = 14 36 37.56 58 43 2.0
  Extent = 5.8 (5.5-6.0)", rotation angle = 0
  Source counts = 1913.0 +/- 49.1
  Background counts = 498.1
  Rate = 0.3 +/- 0.009
[Mon Mar 12 13:09:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 13:09:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 13:09:14 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 13:09:14 2012] Source does appear to be extended
[Mon Mar 12 13:09:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 13:09:32 2012] Counts = 1912.990000, rescaling region sizes by 2.000000
[Mon Mar 12 13:09:32 2012] XMMSAS src. selection expression = ellipse(24170.777400, 18430.894200, 695.301620, 695.301620, 0.000000, X, Y)
[Mon Mar 12 13:09:32 2012] Writing source region out to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src2_src.reg
[Mon Mar 12 13:09:32 2012] Extracting stamp from image fullrun_pn_xmm0601781401_pi300-10000_cl_sm2.00.img.gz, (238, 172) - (318, 252)
[Mon Mar 12 13:09:32 2012] XMMSAS bgd. selection expression = annulus(24170.777400, 18430.894200, 2317.672067, 4635.344133, X, Y) && !ellipse(26563.426000, 23965.569200, 1539.756044, 1539.756044, 0.000000, X, Y) && !ellipse(24834.000000, 25209.652000, 2242.384065, 2242.384065, 0.000000, X, Y) && !ellipse(27443.165466, 23406.421753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.106400, 23397.383600, 351.911210, 351.911210, 0.000000, X, Y) && !ellipse(27397.703400, 23054.765778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27021.939758, 22481.935242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19213.965200, 21702.531200, 480.322414, 480.322414, 0.000000, X, Y) && !ellipse(28574.231642, 20181.607400, 408.306412, 408.306412, 0.000000, X, Y)
[Mon Mar 12 13:09:32 2012] Writing fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src2.gif
[Mon Mar 12 13:16:32 2012] Mean detx,y = (5986.00, -1593.68) 
[Mon Mar 12 13:16:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 13:18:05 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 13:18:06 2012] Setting source spectrum file to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 12 13:18:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 13 15:45:01 2012] Updating aperture counts using extracted products
[Tue Mar 13 15:45:01 2012] Error reading totcts from fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 15:45:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 15:45:03 2012] Using photon index=1.80, rate=0.332, arf fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src2.arf
[Tue Mar 13 15:45:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 15:45:03 2012] Updating source flux to 1.1e-12