[Mon Mar 12 05:52:33 2012] Detection parameters: Position = (283.4, 293.0) = 14 36 34.78 58 48 53.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 183.6 +/- 23.3 Background counts = 91.6 Rate = 0.02 +/- 0.002 [Mon Mar 12 05:52:34 2012] Off-axis axis estimate = 1.16' [Mon Mar 12 05:55:18 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting [Mon Mar 12 05:55:18 2012] Initial guess for spatial extent in simple fitting = 7.01" [Mon Mar 12 05:55:18 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.122 [Mon Mar 12 05:55:18 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.01" [Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src19.ximg exists [Mon Mar 12 07:58:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src19.csv [Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src19_1.ximg exists [Mon Mar 12 07:58:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src19.csv [Mon Mar 12 07:58:17 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Mon Mar 12 07:58:17 2012] Fit fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly [Mon Mar 12 09:26:08 2012] Warning, spatial fit 19 centroid is now closest to src. 18 [Mon Mar 12 09:26:08 2012] Vigneting correction estimate = 1.000000 [Mon Mar 12 09:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Mar 12 09:26:08 2012] Assessing source extent using major [Mon Mar 12 09:26:08 2012] Source does appear to be extended [Mon Mar 12 09:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Mar 12 09:26:08 2012] Source is confused with source 18 [Mon Mar 12 09:26:29 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting [Mon Mar 12 09:26:29 2012] Initial guess for spatial extent in simple fitting = 7.01" [Mon Mar 12 09:26:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.122 [Mon Mar 12 09:26:29 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.01" [Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src17.ximg exists [Mon Mar 12 11:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src17.csv [Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src17_1.ximg exists [Mon Mar 12 11:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src17.csv [Mon Mar 12 11:58:12 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Mon Mar 12 11:58:12 2012] Fit fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly [Mon Mar 12 13:09:14 2012] Spatial fit model total counts = 1644.320000, observed total counts = 1641.000000 [Mon Mar 12 13:09:14 2012] Offset between fit and detection position for source 19 = 3.764657 pixels [Mon Mar 12 13:09:14 2012] Warning, changing simple spatial fit ID from 17 to 16 [Mon Mar 12 13:09:14 2012] 1636.234000 total counts/ 405.954000 bgd. counts: snr = 61.061230 Spatial fit parameters: Offset between fit and detection position for source 19 = 3.764657 pixels Position = (286.0, 290.3) = 14 36 33.32 58 48 41.0 Extent = 28.0 (28.0-56.1)", rotation angle = 0 Source counts = 1230.3 +/- 40.5 Background counts = 406.0 Rate = 0.2 +/- 0.007 [Mon Mar 12 13:09:14 2012] Vigneting correction estimate = 1.000000 [Mon Mar 12 13:09:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Mar 12 13:09:14 2012] Assessing source extent using major axis lower bound [Mon Mar 12 13:09:14 2012] Source does appear to be extended [Mon Mar 12 13:09:14 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Mar 12 13:09:32 2012] Counts = 1230.280000, rescaling region sizes by 2.000000 [Mon Mar 12 13:09:32 2012] XMMSAS src. selection expression = ellipse(24834.000000, 25209.652000, 3363.576097, 3363.576097, 0.000000, X, Y) [Mon Mar 12 13:09:32 2012] Writing source region out to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src19_src.reg [Mon Mar 12 13:09:32 2012] Extracting stamp from image fullrun_pn_xmm0601781401_pi300-10000_cl_sm2.00.img.gz, (93, 97) - (479, 484) [Mon Mar 12 13:09:32 2012] XMMSAS bgd. selection expression = annulus(24834.000000, 25209.652000, 11211.920323, 22423.840645, X, Y) && !ellipse(26563.426000, 23965.569200, 1539.756044, 1539.756044, 0.000000, X, Y) && !ellipse(24170.777400, 18430.894200, 463.534413, 463.534413, 0.000000, X, Y) && !ellipse(16163.638000, 31678.928000, 1646.096047, 1646.096047, 0.000000, X, Y) && !ellipse(16523.562000, 31318.522000, 2388.000069, 2388.000069, 0.000000, X, Y) && !ellipse(17065.721939, 31010.000854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17473.584000, 30710.452000, 1709.328049, 678.671220, 216.501000, X, Y) && !ellipse(18897.873249, 29719.667464, 2388.000069, 728.965841, 46.900985, X, Y) && !ellipse(19767.690000, 28990.144000, 1440.104041, 1440.104041, 0.000000, X, Y) && !ellipse(20953.704000, 28101.998000, 1351.424039, 660.820019, 36.143900, X, Y) && !ellipse(29194.869180, 27853.489000, 424.749612, 424.749612, 0.000000, X, Y) && !ellipse(21582.078000, 27650.922800, 1169.672034, 405.284012, 39.007358, X, Y) && !ellipse(21917.900818, 27430.747894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22376.864962, 27068.968711, 1691.760049, 410.712537, 36.569888, X, Y) && !ellipse(27932.147522, 26557.970734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24056.234000, 25814.952000, 1121.192032, 1121.192032, 0.000000, X, Y) && !ellipse(22182.194400, 24739.994400, 332.000810, 332.000810, 0.000000, X, Y) && !ellipse(27443.165466, 23406.421753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.106400, 23397.383600, 351.911210, 351.911210, 0.000000, X, Y) && !ellipse(27397.703400, 23054.765778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27021.939758, 22481.935242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19213.965200, 21702.531200, 480.322414, 480.322414, 0.000000, X, Y) && !ellipse(28574.231642, 20181.607400, 408.306412, 408.306412, 0.000000, X, Y) && !ellipse(15352.504000, 32281.838000, 1584.560046, 1584.560046, 0.000000, X, Y) [Mon Mar 12 13:09:32 2012] Writing fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src19.gif [Mon Mar 12 13:49:51 2012] Mean detx,y = (142.58, -23.61) [Mon Mar 12 13:49:58 2012] Setting backscal keywords in source and bgd. spectrum [Mon Mar 12 14:07:44 2012] Binned source spectrum to 10 counts/bin [Mon Mar 12 14:07:45 2012] Setting source spectrum file to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Mon Mar 12 14:07:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src19_bgd.pi.gz [Tue Mar 13 15:45:02 2012] Updating aperture counts using extracted products [Tue Mar 13 15:45:02 2012] Error reading totcts from fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Tue Mar 13 15:45:04 2012] Calculating source flux in energy range 0.30-8.00 [Tue Mar 13 15:45:04 2012] Using photon index=1.80, rate=0.214, arf fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src19.arf [Tue Mar 13 15:45:04 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Mar 13 15:45:04 2012] Updating source flux to 4.8e-13 [Tue Mar 13 15:46:24 2012] Flag c found in src. 19 procflags, skipping spectral fitting