[Mon Mar 12 05:52:33 2012] Detection parameters:
  Position = (306.0, 276.0) = 14 36 22.12 58 47 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78552.8 +/- 333.5
  Background counts = 91.4
  Rate = 8 +/- 0.03

[Mon Mar 12 05:52:34 2012] Off-axis axis estimate = 1.72'
[Mon Mar 12 05:55:18 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 05:55:18 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Mar 12 05:55:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Mar 12 05:55:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Mar 12 07:58:16 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 12 07:58:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src1.csv
[Mon Mar 12 07:58:16 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 12 07:58:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src1.csv
[Mon Mar 12 07:58:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 12 07:58:17 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 12 07:58:17 2012] Fit fullrun_pn_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Mar 12 09:26:08 2012] Spatial fit model total counts = 66333.500000, observed total counts = 65933.000000
[Mon Mar 12 09:26:08 2012] Offset between fit and detection position for source 1 = 0.104432 pixels
[Mon Mar 12 09:26:08 2012] 66279.700000 total counts/ 13680.100000 bgd. counts: snr = 449.715447
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.104432 pixels
  Position = (305.9, 276.0) = 14 36 22.18 58 47 38.8
  Extent = 6.5 (6.4-6.5)", rotation angle = 0
  Source counts = 52599.6 +/- 257.4
  Background counts = 13680.1
  Rate = 9 +/- 0.04
[Mon Mar 12 09:26:08 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 09:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 09:26:08 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 09:26:08 2012] Source does appear to be extended
[Mon Mar 12 09:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 09:26:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 12 09:26:29 2012] Initial guess for spatial extent in simple fitting = 6.46"
[Mon Mar 12 09:26:29 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.014
[Mon Mar 12 09:26:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.46"
[Mon Mar 12 11:58:11 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar 12 11:58:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src1.csv
[Mon Mar 12 11:58:11 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar 12 11:58:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src1.csv
[Mon Mar 12 11:58:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar 12 11:58:12 2012] fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar 12 11:58:12 2012] Fit fullrun_pn_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar 12 13:09:14 2012] Spatial fit model total counts = 66033.300000, observed total counts = 65811.000000
[Mon Mar 12 13:09:14 2012] Offset between fit and detection position for source 1 = 0.016883 pixels
[Mon Mar 12 13:09:14 2012] 66254.000000 total counts/ 13960.000000 bgd. counts: snr = 442.597701
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.016883 pixels
  Position = (305.9, 276.0) = 14 36 22.19 58 47 38.8
  Extent = 6.4 (6.4-6.5)", rotation angle = 0
  Source counts = 52294.0 +/- 257.4
  Background counts = 13960.0
  Rate = 9 +/- 0.04
[Mon Mar 12 13:09:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 13:09:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 13:09:14 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 13:09:14 2012] Source does appear to be extended
[Mon Mar 12 13:09:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 13:09:32 2012] Counts = 52294.000000, rescaling region sizes by 3.000000
[Mon Mar 12 13:09:32 2012] XMMSAS src. selection expression = ellipse(26563.426000, 23965.569200, 1154.817033, 1154.817033, 0.000000, X, Y)
[Mon Mar 12 13:09:32 2012] Writing source region out to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 12 13:09:32 2012] Extracting stamp from image fullrun_pn_xmm0601781401_pi300-10000_cl_sm2.00.img.gz, (240, 210) - (372, 342)
[Mon Mar 12 13:09:32 2012] XMMSAS bgd. selection expression = annulus(26563.426000, 23965.569200, 5774.085166, 11548.170332, X, Y) && !ellipse(24170.777400, 18430.894200, 463.534413, 463.534413, 0.000000, X, Y) && !ellipse(16163.638000, 31678.928000, 1646.096047, 1646.096047, 0.000000, X, Y) && !ellipse(16523.562000, 31318.522000, 2388.000069, 2388.000069, 0.000000, X, Y) && !ellipse(17065.721939, 31010.000854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17473.584000, 30710.452000, 1709.328049, 678.671220, 216.501000, X, Y) && !ellipse(18897.873249, 29719.667464, 2388.000069, 728.965841, 46.900985, X, Y) && !ellipse(19767.690000, 28990.144000, 1440.104041, 1440.104041, 0.000000, X, Y) && !ellipse(20953.704000, 28101.998000, 1351.424039, 660.820019, 36.143900, X, Y) && !ellipse(29194.869180, 27853.489000, 424.749612, 424.749612, 0.000000, X, Y) && !ellipse(21582.078000, 27650.922800, 1169.672034, 405.284012, 39.007358, X, Y) && !ellipse(21917.900818, 27430.747894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22376.864962, 27068.968711, 1691.760049, 410.712537, 36.569888, X, Y) && !ellipse(27932.147522, 26557.970734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24056.234000, 25814.952000, 1121.192032, 1121.192032, 0.000000, X, Y) && !ellipse(24834.000000, 25209.652000, 2242.384065, 2242.384065, 0.000000, X, Y) && !ellipse(22182.194400, 24739.994400, 332.000810, 332.000810, 0.000000, X, Y) && !ellipse(27443.165466, 23406.421753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.106400, 23397.383600, 351.911210, 351.911210, 0.000000, X, Y) && !ellipse(27397.703400, 23054.765778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27021.939758, 22481.935242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19213.965200, 21702.531200, 480.322414, 480.322414, 0.000000, X, Y) && !ellipse(28574.231642, 20181.607400, 408.306412, 408.306412, 0.000000, X, Y) && !ellipse(15352.504000, 32281.838000, 1584.560046, 1584.560046, 0.000000, X, Y)
[Mon Mar 12 13:09:32 2012] Writing fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src1.gif
[Mon Mar 12 13:09:56 2012] Mean detx,y = (123.97, -199.39) 
[Mon Mar 12 13:10:03 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 13:16:15 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 13:16:16 2012] Setting source spectrum file to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 12 13:16:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 13 15:45:01 2012] Updating aperture counts using extracted products
[Tue Mar 13 15:45:01 2012] Error reading totcts from fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 13 15:45:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 15:45:02 2012] Using photon index=1.80, rate=9.08, arf fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 15:45:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 15:45:03 2012] Updating source flux to 2.1e-11
[Tue Mar 13 15:49:49 2012] Reading fit data from xmm0601781401/analysis//spectral/fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Mar 13 15:49:49 2012] Spectral fit parameter nH value = 1.69876e+12
[Tue Mar 13 15:49:49 2012] Spectral fit parameter PhoIndex value = 2.29064
[Tue Mar 13 15:49:49 2012] Failed to get F(0.3-8.0) from xmm0601781401/analysis//spectral/fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 15:49:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 15:49:49 2012] Using Nh = 1.7e+12, photon index=2.29, rate=9.08, arf fullrun_pn_xmm0601781401_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 15:49:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 15:49:49 2012] Updating source flux to 1.6e-11