[Mon Mar 12 05:53:32 2012] Detection parameters:
  Position = (305.7, 276.0) = 14 36 22.30 58 47 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22248.1 +/- 177.7
  Background counts = 8.3
  Rate = 3 +/- 0.02

[Mon Mar 12 05:53:32 2012] Off-axis axis estimate = 1.71'
[Mon Mar 12 08:18:22 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 08:18:22 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Mar 12 08:18:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Mar 12 08:18:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Mar 12 09:25:56 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 12 09:25:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_src1.csv
[Mon Mar 12 09:25:56 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 12 09:25:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_src1.csv
[Mon Mar 12 09:25:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 09:25:57 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 12 09:25:57 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 12 09:25:57 2012] Fit fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Mar 12 09:26:17 2012] Spatial fit model total counts = 20892.000000, observed total counts = 20595.000000
[Mon Mar 12 09:26:17 2012] Offset between fit and detection position for source 3 = 0.028794 pixels
[Mon Mar 12 09:26:17 2012] 20986.400000 total counts/ 5032.200000 bgd. counts: snr = 224.903433
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.028794 pixels
  Position = (305.7, 276.0) = 14 36 22.29 58 47 38.9
  Extent = 6.5 (6.4-6.6)", rotation angle = 0
  Source counts = 15954.2 +/- 144.9
  Background counts = 5032.2
  Rate = 2 +/- 0.02
[Mon Mar 12 09:26:17 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 09:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 09:26:17 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 09:26:17 2012] Source does appear to be extended
[Mon Mar 12 09:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 12:10:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 12 12:10:47 2012] Initial guess for spatial extent in simple fitting = 6.51"
[Mon Mar 12 12:10:47 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.003
[Mon Mar 12 12:10:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.51"
[Mon Mar 12 13:09:05 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar 12 13:09:05 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_src1.csv
[Mon Mar 12 13:09:05 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar 12 13:09:05 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_src1.csv
[Mon Mar 12 13:09:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 13:09:05 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar 12 13:09:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Mar 12 13:09:05 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar 12 13:09:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Mar 12 13:09:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 13:09:21 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Mon Mar 12 13:09:21 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 13:09:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 13:09:21 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 13:09:21 2012] Source does appear to be extended
[Mon Mar 12 13:09:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 15:26:36 2012] Counts = 15954.200000, rescaling region sizes by 3.000000
[Tue Mar 13 15:26:36 2012] XMMSAS src. selection expression = ellipse(26547.354400, 23967.150400, 1172.388634, 1172.388634, 0.000000, X, Y)
[Tue Mar 13 15:26:36 2012] Writing source region out to fullrun_mos2_xmm0601781401_pi300-10000_pass1_cl_src3_src.reg
[Tue Mar 13 15:26:36 2012] Extracting stamp from image fullrun_mos2_xmm0601781401_pi300-10000_cl_sm2.00.img.gz, (238, 209) - (373, 343)
[Tue Mar 13 15:26:36 2012] XMMSAS bgd. selection expression = annulus(26547.354400, 23967.150400, 5861.943169, 11723.886337, X, Y) && !ellipse(24148.035156, 18420.629852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16828.783604, 20664.089800, 511.516498, 511.516498, 0.000000, X, Y) && !ellipse(25529.454865, 23642.509613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25809.892334, 23331.528687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26485.283997, 22824.603943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23959.461700, 23357.046173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22432.530000, 24657.101800, 1291.784037, 1291.784037, 0.000000, X, Y)
[Tue Mar 13 15:26:36 2012] Writing fullrun_mos2_xmm0601781401_pi300-10000_pass1_cl_src3.gif
[Tue Mar 13 15:26:42 2012] Mean detx,y = (29.41, 44.85) 
[Tue Mar 13 15:26:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 15:34:56 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 15:34:56 2012] Setting source spectrum file to fullrun_mos2_xmm0601781401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 13 15:34:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601781401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Mar 13 15:45:05 2012] Updating aperture counts using extracted products
[Tue Mar 13 15:45:05 2012] Error reading totcts from fullrun_mos2_xmm0601781401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 13 15:45:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 15:45:06 2012] Using photon index=1.80, rate=2.17, arf fullrun_mos2_xmm0601781401_pi300-10000_pass1_cl_src3.arf
[Tue Mar 13 15:45:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 15:45:06 2012] Updating source flux to 2.2e-11
[Tue Mar 13 15:46:24 2012] Reading fit data from xmm0601781401/analysis//spectral/fullrun_mos2_xmm0601781401_pi300-10000_pass1_cl_src3_pl.csv
[Tue Mar 13 15:46:24 2012] Spectral fit parameter nH value = 2.07051e+14
[Tue Mar 13 15:46:24 2012] Spectral fit parameter PhoIndex value = 2.22389
[Tue Mar 13 15:46:24 2012] Failed to get F(0.3-8.0) from xmm0601781401/analysis//spectral/fullrun_mos2_xmm0601781401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 15:46:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 15:46:24 2012] Using Nh = 2.1e+14, photon index=2.22, rate=2.17, arf fullrun_mos2_xmm0601781401_pi300-10000_pass1_cl_src3.arf
[Tue Mar 13 15:46:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 15:46:24 2012] Updating source flux to 1.9e-11