[Mon Mar 12 05:53:32 2012] Detection parameters: Position = (316.3, 161.6) = 14 36 16.40 58 39 20.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 24.9 +/- 6.6 Background counts = 2.8 Rate = 0.003 +/- 0.0008 [Mon Mar 12 05:53:32 2012] Off-axis axis estimate = 10.01' [Mon Mar 12 08:18:22 2012] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting [Mon Mar 12 08:18:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Mar 12 08:18:22 2012] Initial guess for spatial extent in simple fitting = 11.43" [Mon Mar 12 08:18:22 2012] source mask rpix=2.6, npix_max = 39, mask sum = 31, frac = 0.792 [Mon Mar 12 08:18:22 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.43" [Mon Mar 12 09:25:57 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_src18.ximg exists [Mon Mar 12 09:25:57 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_src18_1.ximg exists [Mon Mar 12 09:25:57 2012] Fit fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_src18 appears to have run properly [Mon Mar 12 09:25:57 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists [Mon Mar 12 09:25:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src18.csv [Mon Mar 12 09:25:57 2012] fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists [Mon Mar 12 09:25:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src18.csv [Mon Mar 12 09:25:57 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Mar 12 09:26:17 2012] Spatial fit model total counts = 52.947300, observed total counts = 50.000000 [Mon Mar 12 09:26:17 2012] Offset between fit and detection position for source 15 = 1.725122 pixels [Mon Mar 12 09:26:17 2012] 53.690800 total counts/ 36.539500 bgd. counts: snr = 2.837369 Spatial fit parameters: Offset between fit and detection position for source 15 = 1.725122 pixels Position = (316.5, 159.9) = 14 36 16.27 58 39 13.5 Extent = 10.7" x 6.2", rotation angle = 106 Source counts = 17.2 +/- 7.3 Background counts = 36.5 Rate = 0.002 +/- 0.001 [Mon Mar 12 09:26:17 2012] Vigneting correction estimate = 1.000000 [Mon Mar 12 09:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Mar 12 09:26:17 2012] Assessing source extent using major [Mon Mar 12 09:26:17 2012] Source does appear to be extended [Mon Mar 12 09:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.71 [Mon Mar 12 09:26:17 2012] Source is asymmetric [Mon Mar 12 09:26:17 2012] Deleting source due to low Poisson probability 0.8