[Mon Mar 12 05:53:10 2012] Detection parameters:
  Position = (278.3, 212.9) = 14 36 37.61 58 43 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 947.6 +/- 37.1
  Background counts = 6.8
  Rate = 0.2 +/- 0.006

[Mon Mar 12 05:53:11 2012] Off-axis axis estimate = 6.37'
[Mon Mar 12 07:58:18 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 07:58:18 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Mon Mar 12 07:58:18 2012] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.885
[Mon Mar 12 07:58:18 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.62"
[Mon Mar 12 08:18:22 2012] fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_src2.ximg exists
[Mon Mar 12 08:18:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_src2.csv
[Mon Mar 12 08:18:22 2012] fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Mar 12 08:18:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_src2.csv
[Mon Mar 12 08:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 08:18:22 2012] fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Mar 12 08:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Mar 12 08:18:22 2012] fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Mar 12 08:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Mar 12 08:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601781401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 09:26:12 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.524771 pixels away
[Mon Mar 12 09:26:12 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 09:26:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 09:26:12 2012] Assessing source extent using major
[Mon Mar 12 09:26:12 2012] Source does appear to be extended
[Mon Mar 12 09:26:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 11:58:12 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 11:58:12 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Mon Mar 12 11:58:12 2012] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.885
[Mon Mar 12 11:58:12 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.62"
[Mon Mar 12 12:10:47 2012] fullrun_mos1_xmm0601781401_pi300-10000_cl_pass1_src2.ximg exists
[Mon Mar 12 12:10:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781401_pi300-10000_cl_pass1_src2.csv
[Mon Mar 12 12:10:47 2012] fullrun_mos1_xmm0601781401_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Mar 12 12:10:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781401_pi300-10000_cl_pass1_src2.csv
[Mon Mar 12 12:10:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601781401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601781401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 12:10:47 2012] fullrun_mos1_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Mar 12 12:10:47 2012] fullrun_mos1_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Mar 12 12:10:47 2012] Fit fullrun_mos1_xmm0601781401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Mar 12 13:09:17 2012] Spatial fit model total counts = 847.717000, observed total counts = 832.000000
[Mon Mar 12 13:09:17 2012] Offset between fit and detection position for source 2 = 0.330402 pixels
[Mon Mar 12 13:09:17 2012] 843.419000 total counts/ 248.422000 bgd. counts: snr = 37.750243
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.330402 pixels
  Position = (278.2, 212.6) = 14 36 37.68 58 43 2.7
  Extent = 4.6 (4.3-5.0)", rotation angle = 0
  Source counts = 595.0 +/- 29.0
  Background counts = 248.4
  Rate = 0.08 +/- 0.004
[Mon Mar 12 13:09:17 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 13:09:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 13:09:17 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 13:09:17 2012] Source does appear to be extended
[Mon Mar 12 13:09:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 14:55:16 2012] XMMSAS src. selection expression = ellipse(24151.643660, 18444.630000, 277.396208, 277.396208, 0.000000, X, Y)
[Tue Mar 13 14:55:16 2012] Writing source region out to fullrun_mos1_xmm0601781401_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar 13 14:55:16 2012] Extracting stamp from image fullrun_mos1_xmm0601781401_pi300-10000_cl_sm2.00.img.gz, (262, 197) - (294, 229)
[Tue Mar 13 14:55:16 2012] XMMSAS bgd. selection expression = annulus(24151.643660, 18444.630000, 462.327013, 924.654027, X, Y)
[Tue Mar 13 14:55:16 2012] Writing fullrun_mos1_xmm0601781401_pi300-10000_pass1_cl_src2.gif
[Tue Mar 13 15:02:42 2012] Mean detx,y = (1650.86, 5677.97) 
[Tue Mar 13 15:02:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 15:03:08 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 15:03:08 2012] Setting source spectrum file to fullrun_mos1_xmm0601781401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 15:03:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601781401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 13 15:45:04 2012] Updating aperture counts using extracted products
[Tue Mar 13 15:45:05 2012] Error reading totcts from fullrun_mos1_xmm0601781401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 15:45:05 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 15:45:05 2012] Using photon index=1.80, rate=0.0828, arf fullrun_mos1_xmm0601781401_pi300-10000_pass1_cl_src2.arf
[Tue Mar 13 15:45:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 15:45:05 2012] Updating source flux to 1.4e-12