[Thu Jan  5 11:26:06 2012] Detection parameters:
  Position = (327.0, 284.0) = 13 49 42.88 2 5 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 385.5 +/- 38.8
  Background counts = 472.1
  Rate = 0.05 +/- 0.005

[Thu Jan  5 11:26:11 2012] Off-axis axis estimate = 2.32'
[Thu Jan  5 11:37:28 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 11:37:28 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Thu Jan  5 11:37:28 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.794
[Thu Jan  5 11:37:28 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 7.59"
[Fri Jan  6 02:45:58 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src67.ximg exists
[Fri Jan  6 02:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src67.csv
[Fri Jan  6 02:45:58 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src67_1.ximg exists
[Fri Jan  6 02:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src67.csv
[Fri Jan  6 02:45:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 02:46:02 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Fri Jan  6 02:46:02 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Fri Jan  6 02:46:02 2012] Fit fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Fri Jan  6 02:54:33 2012] Spatial fit model total counts = 2958.260000, observed total counts = 2960.000000
[Fri Jan  6 02:54:33 2012] Offset between fit and detection position for source 75 = 2.937323 pixels
[Fri Jan  6 02:54:33 2012] 2916.790000 total counts/ 1865.650000 bgd. counts: snr = 24.335792
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 2.937323 pixels
  Position = (329.9, 283.6) = 13 49 42.04 2 5 17.3
  Extent = 15.2 (15.1-30.3)", rotation angle = 0
  Source counts = 1051.1 +/- 54.0
  Background counts = 1865.7
  Rate = 0.3 +/- 0.01
[Fri Jan  6 02:54:33 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 02:54:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 02:54:33 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 02:54:33 2012] Source does appear to be extended
[Fri Jan  6 02:54:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 02:54:33 2012] Source is confused with source 84
[Fri Jan  6 02:54:33 2012] Source is confused with source 150
[Fri Jan  6 02:55:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan  6 02:55:02 2012] Initial guess for spatial extent in simple fitting = 15.17"
[Fri Jan  6 02:55:02 2012] source mask rpix=3.5, npix_max = 63, mask sum = 59, frac = 0.927
[Fri Jan  6 02:55:02 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 15.17"
[Fri Jan  6 20:25:40 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src62.ximg exists
[Fri Jan  6 20:25:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src62.csv
[Fri Jan  6 20:25:40 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src62_1.ximg exists
[Fri Jan  6 20:25:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src62.csv
[Fri Jan  6 20:25:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 20:25:44 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Fri Jan  6 20:25:44 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Fri Jan  6 20:25:44 2012] Fit fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Fri Jan  6 20:32:46 2012] Warning, spatial fit 62 centroid is now closest to src. 84
[Fri Jan  6 20:32:46 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 20:32:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 20:32:46 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 20:32:46 2012] Source does appear to be extended
[Fri Jan  6 20:32:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 20:33:26 2012] Counts = 1051.140000, rescaling region sizes by 2.000000
[Fri Jan  6 20:33:26 2012] XMMSAS src. selection expression = ellipse(28649.386000, 24626.649000, 1820.784052, 1820.784052, 0.000000, X, Y)
[Fri Jan  6 20:33:26 2012] Writing source region out to fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src75_src.reg
[Fri Jan  6 20:33:26 2012] Extracting stamp from image fullrun_pn_xmm0601781301_pi300-10000_cl_sm2.00.img.gz, (225, 179) - (435, 388)
[Fri Jan  6 20:33:26 2012] XMMSAS bgd. selection expression = annulus(28649.386000, 24626.649000, 6069.280175, 12138.560349, X, Y) && !ellipse(36017.284000, 26933.388000, 1605.088046, 1605.088046, 0.000000, X, Y) && !ellipse(25577.310000, 32235.432000, 1414.288041, 1414.288041, 0.000000, X, Y) && !ellipse(25480.565155, 36493.252319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41833.978400, 31397.073600, 1281.776037, 1281.776037, 0.000000, X, Y) && !ellipse(40780.705139, 29016.437592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40579.477814, 28410.780273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26626.032410, 27625.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32496.867706, 26390.411835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28617.997345, 26117.692535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25422.741000, 24000.574200, 418.164486, 418.164486, 0.000000, X, Y) && !ellipse(26443.000000, 33574.246735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41652.034000, 28753.410000, 2111.120061, 2111.120061, 0.000000, X, Y) && !ellipse(24506.994000, 37774.612000, 1852.696053, 648.660019, 81.912000, X, Y) && !ellipse(24888.938000, 37045.958173, 1388.075968, 374.315235, 82.597204, X, Y) && !ellipse(24338.740000, 37070.726000, 1927.752055, 1927.752055, 0.000000, X, Y) && !ellipse(33815.055237, 35358.102509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25816.974000, 37756.618000, 1355.808039, 1355.808039, 0.000000, X, Y) && !ellipse(24363.875763, 37429.689117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34541.938538, 36781.232727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24706.502000, 36340.737200, 1721.272050, 1721.272050, 0.000000, X, Y) && !ellipse(24124.992157, 36150.527863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34583.364960, 36125.769714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35970.924000, 37091.612000, 1872.416054, 1872.416054, 0.000000, X, Y) && !ellipse(25925.808258, 35288.182312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24887.357269, 34328.094513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34076.920776, 34052.717529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.830000, 33848.646000, 1844.664053, 1844.664053, 0.000000, X, Y) && !ellipse(35628.232000, 33251.530000, 1828.920053, 1828.920053, 0.000000, X, Y) && !ellipse(33042.834656, 33262.540985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41078.584000, 32082.920000, 3668.384106, 3668.384106, 0.000000, X, Y) && !ellipse(41318.916000, 30834.242000, 2121.312061, 2121.312061, 0.000000, X, Y) && !ellipse(39978.112000, 28493.820400, 1942.520056, 1942.520056, 0.000000, X, Y) && !ellipse(39540.730000, 28128.021000, 1244.976036, 1244.976036, 0.000000, X, Y) && !ellipse(39993.724000, 28156.938000, 2020.224058, 2020.224058, 0.000000, X, Y) && !ellipse(26609.818146, 28236.774963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37224.359772, 27961.509491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38890.056000, 27747.072000, 1942.520056, 1942.520056, 0.000000, X, Y) && !ellipse(38399.367800, 28178.112000, 1880.560054, 1880.560054, 0.000000, X, Y) && !ellipse(37159.346600, 27348.774000, 1794.256052, 1794.256052, 0.000000, X, Y) && !ellipse(37469.398000, 27394.808000, 840.824024, 840.824024, 0.000000, X, Y) && !ellipse(32365.924316, 25665.745483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34145.382000, 35960.274000, 1828.424053, 1828.424053, 0.000000, X, Y) && !ellipse(32412.553780, 35899.158000, 1672.360048, 1672.360048, 0.000000, X, Y) && !ellipse(33711.105530, 35873.441040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34954.506000, 35338.472000, 1899.944055, 1899.944055, 0.000000, X, Y) && !ellipse(33025.622101, 35157.153961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24909.086000, 34963.562400, 1302.408037, 1302.408037, 0.000000, X, Y) && !ellipse(24749.972200, 34646.092600, 660.808019, 660.808019, 0.000000, X, Y) && !ellipse(34395.718109, 34743.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32111.827393, 34677.488403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34806.400696, 34308.986267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33296.472260, 33621.240753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25317.961980, 33157.907940, 833.168024, 833.168024, 0.000000, X, Y) && !ellipse(34653.059479, 33010.406128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32772.491608, 32580.190491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35829.596000, 32646.854000, 1809.776052, 1809.776052, 0.000000, X, Y) && !ellipse(36026.564545, 32075.392426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33614.778412, 31449.397583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28030.688000, 24823.398000, 2161.856062, 2161.856062, 0.000000, X, Y) && !ellipse(38381.641907, 28729.428925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38656.042000, 27965.070000, 1232.464035, 1232.464035, 0.000000, X, Y) && !ellipse(36554.918000, 27264.728000, 1709.936049, 1709.936049, 0.000000, X, Y) && !ellipse(34544.742249, 26480.390778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25006.528000, 36027.948000, 1726.784050, 1726.784050, 0.000000, X, Y) && !ellipse(31885.932190, 33730.081024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.560000, 33866.430800, 1008.720029, 1008.720029, 0.000000, X, Y) && !ellipse(26151.418000, 32541.494000, 1500.096043, 1500.096043, 0.000000, X, Y) && !ellipse(34129.673553, 32655.718109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34901.918030, 32281.313843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33612.728729, 32316.495636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.872040, 31624.847229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25987.835052, 31700.815582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34372.098969, 31238.317444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26578.368200, 31132.520000, 1410.680041, 1410.680041, 0.000000, X, Y) && !ellipse(26835.206000, 30457.544800, 1369.520039, 1230.584035, 57.301000, X, Y) && !ellipse(26930.458069, 30057.628571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30000.739258, 24946.025452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26758.836800, 29717.118000, 1590.560046, 1590.560046, 0.000000, X, Y) && !ellipse(27250.966600, 29344.591000, 659.381619, 659.381619, 0.000000, X, Y) && !ellipse(26419.649017, 29361.864868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26672.942000, 28648.954000, 735.610421, 735.610421, 0.000000, X, Y) && !ellipse(22908.133820, 28901.748291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36873.702000, 29074.590800, 1269.032037, 1269.032037, 0.000000, X, Y) && !ellipse(27627.778000, 28292.784000, 1234.984036, 604.221617, 63.500000, X, Y) && !ellipse(33782.470062, 28585.799805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22143.292892, 28355.457428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36599.809265, 28223.223694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35674.066925, 28149.267853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36195.490784, 28175.149078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34678.582275, 27956.188812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34853.508000, 27069.694800, 1914.608055, 1914.608055, 0.000000, X, Y) && !ellipse(34946.219849, 27502.255798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35425.062347, 27427.176880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33750.567230, 27461.615265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.897675, 27449.874725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34509.573730, 27176.053589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35819.381989, 27264.062500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27019.088257, 27276.493347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32885.216000, 26955.256000, 558.728016, 558.728016, 0.000000, X, Y) && !ellipse(29399.802582, 26747.646027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35490.216766, 26836.342590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27466.359802, 26562.566589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.739899, 26566.060608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33928.030000, 26332.678000, 1605.088046, 1605.088046, 0.000000, X, Y) && !ellipse(30849.557434, 26221.759064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29988.040253, 26224.230896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28888.520935, 26226.551392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27524.706726, 26159.745544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31857.814000, 25938.022000, 1468.472042, 1468.472042, 0.000000, X, Y) && !ellipse(30623.664886, 25605.922363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27811.449890, 25606.856934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31011.572632, 25606.174591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30838.748810, 25194.793732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28231.034790, 25529.715057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31620.660248, 25525.501526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29632.070000, 24948.284800, 1308.488038, 1308.488038, 0.000000, X, Y) && !ellipse(28794.819641, 25160.517303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30336.504883, 25254.040710, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 20:33:26 2012] Writing fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src75.gif
[Fri Jan  6 23:41:26 2012] Mean detx,y = (-3440.80, -323.62) 
[Fri Jan  6 23:41:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 23:46:20 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 23:46:21 2012] Setting source spectrum file to fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Fri Jan  6 23:46:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Sat Jan  7 05:20:52 2012] Updating aperture counts using extracted products
[Sat Jan  7 05:20:52 2012] Error reading totcts from fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sat Jan  7 05:20:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan  7 05:20:56 2012] Using photon index=1.80, rate=0.266, arf fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src75.arf
[Sat Jan  7 05:20:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan  7 05:20:56 2012] Updating source flux to 7.6e-13
[Sat Jan  7 05:21:13 2012] Flag c found in src. 75 procflags, skipping spectral fitting