[Thu Jan  5 11:26:02 2012] Detection parameters:
  Position = (287.4, 429.8) = 13 49 54.36 2 15 51.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.6 +/- 29.8
  Background counts = 392.0
  Rate = 0.02 +/- 0.002

[Thu Jan  5 11:26:11 2012] Off-axis axis estimate = 9.55'
[Thu Jan  5 11:37:28 2012] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 11:37:28 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Thu Jan  5 11:37:28 2012] source mask rpix=2.6, npix_max = 37, mask sum = 26, frac = 0.687
[Thu Jan  5 11:37:28 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.21"
[Fri Jan  6 02:45:56 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jan  6 02:45:56 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jan  6 02:45:56 2012] Fit fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src21 appears to have run properly
[Fri Jan  6 02:46:00 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jan  6 02:46:00 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jan  6 02:46:00 2012] Fit fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Jan  6 02:54:32 2012] Warning, spatial fit 21 centroid is now closest to src. 34
[Fri Jan  6 02:54:32 2012] Spatial fit model total counts = 2105.580000, observed total counts = 2112.000000
[Fri Jan  6 02:54:32 2012] Offset between fit and detection position for source 27 = 2.147197 pixels
[Fri Jan  6 02:54:32 2012] Warning, changing simple spatial fit ID from 21 to 28
[Fri Jan  6 02:54:32 2012] 1927.604000 total counts/ 1778.560000 bgd. counts: snr = 3.534111
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.147197 pixels
  Position = (285.5, 428.8) = 13 49 54.91 2 15 48.8
  Extent = 6.3 (5.2-7.7)", rotation angle = 0
  Source counts = 149.0 +/- 43.9
  Background counts = 1778.6
  Rate = 0.04 +/- 0.01
[Fri Jan  6 02:54:33 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 02:54:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 02:54:33 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 02:54:33 2012] Source does appear to be extended
[Fri Jan  6 02:54:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 02:54:33 2012] Source is confused with source 22
[Fri Jan  6 02:54:33 2012] Source is confused with source 28
[Fri Jan  6 02:54:33 2012] Source is confused with source 35
[Fri Jan  6 02:55:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan  6 02:55:01 2012] Initial guess for spatial extent in simple fitting = 6.33"
[Fri Jan  6 02:55:01 2012] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.784
[Fri Jan  6 02:55:01 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 6.33"
[Fri Jan  6 20:25:39 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src19.ximg exists
[Fri Jan  6 20:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src19.csv
[Fri Jan  6 20:25:39 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Jan  6 20:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src19.csv
[Fri Jan  6 20:25:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 20:25:42 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Jan  6 20:25:42 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Jan  6 20:25:42 2012] Fit fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Jan  6 20:32:45 2012] Warning, spatial fit 19 centroid is now closest to src. 33
[Fri Jan  6 20:32:45 2012] Spatial fit model total counts = 5241.810000, observed total counts = 5269.000000
[Fri Jan  6 20:32:45 2012] Offset between fit and detection position for source 27 = 2.680228 pixels
[Fri Jan  6 20:32:45 2012] Warning, changing simple spatial fit ID from 19 to 25
[Fri Jan  6 20:32:45 2012] 5140.049000 total counts/ 4917.750000 bgd. counts: snr = 3.169964
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.680228 pixels
  Position = (286.6, 426.4) = 13 49 54.58 2 15 38.2
  Extent = 17.4" x 4.7", rotation angle = 83
  Source counts = 222.3 +/- 71.7
  Background counts = 4917.8
  Rate = 0.06 +/- 0.02
[Fri Jan  6 20:32:46 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 20:32:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 20:32:46 2012] Assessing source extent using major
[Fri Jan  6 20:32:46 2012] Source does appear to be extended
[Fri Jan  6 20:32:46 2012] Computing asymmetry using major and minor axis, asym = 3.71
[Fri Jan  6 20:32:46 2012] Source is asymmetric
[Fri Jan  6 20:33:19 2012] XMMSAS src. selection expression = ellipse(24888.938000, 37045.958173, 1041.056976, 280.736426, 82.597204, X, Y)
[Fri Jan  6 20:33:19 2012] Writing source region out to fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src27_src.reg
[Fri Jan  6 20:33:19 2012] Extracting stamp from image fullrun_pn_xmm0601781301_pi300-10000_cl_sm2.00.img.gz, (227, 367) - (346, 486)
[Fri Jan  6 20:33:19 2012] XMMSAS bgd. selection expression = annulus(24888.938000, 37045.958173, 1735.094960, 3470.189919, X, Y) && !ellipse(25577.310000, 32235.432000, 1414.288041, 1414.288041, 0.000000, X, Y) && !ellipse(25480.565155, 36493.252319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23732.323944, 37724.588531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26443.000000, 33574.246735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23452.146667, 38453.948975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24506.994000, 37774.612000, 1852.696053, 648.660019, 81.912000, X, Y) && !ellipse(25312.842000, 38945.580800, 1367.560039, 1367.560039, 0.000000, X, Y) && !ellipse(24338.740000, 37070.726000, 1927.752055, 1927.752055, 0.000000, X, Y) && !ellipse(25095.915131, 38250.204681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25816.974000, 37756.618000, 1355.808039, 1355.808039, 0.000000, X, Y) && !ellipse(24363.875763, 37429.689117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24706.502000, 36340.737200, 1721.272050, 1721.272050, 0.000000, X, Y) && !ellipse(24124.992157, 36150.527863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25925.808258, 35288.182312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24887.357269, 34328.094513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26242.664764, 39031.056763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26457.448669, 38670.495819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24909.086000, 34963.562400, 1302.408037, 1302.408037, 0.000000, X, Y) && !ellipse(24749.972200, 34646.092600, 660.808019, 660.808019, 0.000000, X, Y) && !ellipse(25317.961980, 33157.907940, 833.168024, 833.168024, 0.000000, X, Y) && !ellipse(27181.862000, 39623.402000, 1904.552055, 1904.552055, 0.000000, X, Y) && !ellipse(25692.256000, 38996.419760, 1276.832037, 1276.832037, 0.000000, X, Y) && !ellipse(27062.158000, 39654.372000, 1276.368037, 767.597622, 89.919000, X, Y) && !ellipse(25006.528000, 36027.948000, 1726.784050, 1726.784050, 0.000000, X, Y) && !ellipse(25650.560000, 33866.430800, 1008.720029, 1008.720029, 0.000000, X, Y) && !ellipse(26151.418000, 32541.494000, 1500.096043, 1500.096043, 0.000000, X, Y) && !ellipse(26691.772000, 39348.884000, 1903.216055, 1302.168037, -0.000000, X, Y)
[Fri Jan  6 20:33:19 2012] Writing fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src27.gif
[Fri Jan  6 21:15:57 2012] Mean detx,y = (-3369.19, 12231.72) 
[Fri Jan  6 21:16:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 21:16:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 21:16:45 2012] Setting source spectrum file to fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Jan  6 21:16:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Jan  7 05:20:50 2012] Updating aperture counts using extracted products
[Sat Jan  7 05:20:50 2012] Error reading totcts from fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Jan  7 05:20:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan  7 05:20:54 2012] Using photon index=1.80, rate=0.0563, arf fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src27.arf
[Sat Jan  7 05:20:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan  7 05:20:54 2012] Updating source flux to 3.6e-13
[Sat Jan  7 05:21:13 2012] Flag c found in src. 27 procflags, skipping spectral fitting