[Thu Jan  5 11:26:08 2012] Detection parameters:
  Position = (299.7, 351.1) = 13 49 50.80 2 10 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 287.9 +/- 35.2
  Background counts = 483.3
  Rate = 0.05 +/- 0.006

[Thu Jan  5 11:26:11 2012] Off-axis axis estimate = 3.82'
[Thu Jan  5 11:37:28 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 11:37:28 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Thu Jan  5 11:37:28 2012] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.770
[Thu Jan  5 11:37:28 2012] Giving source the simple spatial ID 99 for pass 0, mean size = 8.34"
[Fri Jan  6 02:45:59 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src99.ximg exists
[Fri Jan  6 02:45:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src99.csv
[Fri Jan  6 02:45:59 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src99_1.ximg exists
[Fri Jan  6 02:45:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src99.csv
[Fri Jan  6 02:45:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 02:46:02 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Fri Jan  6 02:46:03 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Fri Jan  6 02:46:03 2012] Fit fullrun_pn_xmm0601781301_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly
[Fri Jan  6 02:54:33 2012] Warning: source 98 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 107 at 11.651973 pixels away
[Fri Jan  6 02:54:33 2012] Source 107 is offset by 8.353591 and 4.145671 pixels which is larger than
2 X fitted extent = 4.764276 x 4.764276, not incorporating fit results
[Fri Jan  6 02:54:33 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 02:54:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 02:54:33 2012] Assessing source extent using major
[Fri Jan  6 02:54:33 2012] Source does appear to be extended
[Fri Jan  6 02:54:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 02:54:33 2012] Source is confused with source 108
[Fri Jan  6 02:55:02 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 02:55:02 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Fri Jan  6 02:55:02 2012] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.770
[Fri Jan  6 02:55:02 2012] Giving source the simple spatial ID 90 for pass 1, mean size = 8.34"
[Fri Jan  6 20:25:41 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src90.ximg exists
[Fri Jan  6 20:25:41 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src90_1.ximg exists
[Fri Jan  6 20:25:41 2012] Fit fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_src90 appears to have run properly
[Fri Jan  6 20:25:45 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_tfrozen_src90.ximg exists
[Fri Jan  6 20:25:45 2012] fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_tfrozen_src90_1.ximg exists
[Fri Jan  6 20:25:45 2012] Fit fullrun_pn_xmm0601781301_pi300-10000_cl_pass1_tfrozen_src90 appears to have run properly
[Fri Jan  6 20:32:45 2012] Spatial fit model total counts = 5803.880000, observed total counts = 5810.000000
[Fri Jan  6 20:32:45 2012] Offset between fit and detection position for source 107 = 6.943282 pixels
[Fri Jan  6 20:32:45 2012] Warning, changing simple spatial fit ID from 90 to 2
[Fri Jan  6 20:32:45 2012] 4726.765000 total counts/ 4359.740000 bgd. counts: snr = 5.558599
Spatial fit parameters:
  Offset between fit and detection position for source 107 = 6.943282 pixels
  Position = (303.8, 356.7) = 13 49 49.59 2 10 35.0
  Extent = 23.2 (19.8-35.4)" x 16.5 (12.9-31.2)", rotation angle = 49
  Source counts = 367.0 +/- 68.8
  Background counts = 4359.7
  Rate = 0.09 +/- 0.02
[Fri Jan  6 20:32:46 2012] Spatial fit model total counts = 2760.420000, observed total counts = 2761.000000
[Fri Jan  6 20:32:46 2012] Offset between fit and detection position for source 107 = 2.807647 pixels
[Fri Jan  6 20:32:46 2012] Warning, changing simple spatial fit ID from 2 to 87
[Fri Jan  6 20:32:46 2012] 2459.974000 total counts/ 1639.910000 bgd. counts: snr = 20.250593
Spatial fit parameters:
  Offset between fit and detection position for source 107 = 2.807647 pixels
  Position = (306.1, 358.4) = 13 49 48.95 2 10 42.6
  Extent = 17.6 (17.6-35.3)", rotation angle = 0
  Source counts = 820.1 +/- 49.6
  Background counts = 1639.9
  Rate = 0.2 +/- 0.01
[Fri Jan  6 20:32:46 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 20:32:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 20:32:46 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 20:32:46 2012] Source does appear to be extended
[Fri Jan  6 20:32:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 20:33:28 2012] XMMSAS src. selection expression = ellipse(26578.368200, 31132.520000, 1058.010030, 1058.010030, 0.000000, X, Y)
[Fri Jan  6 20:33:28 2012] Writing source region out to fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src107_src.reg
[Fri Jan  6 20:33:28 2012] Extracting stamp from image fullrun_pn_xmm0601781301_pi300-10000_cl_sm2.00.img.gz, (245, 298) - (367, 419)
[Fri Jan  6 20:33:28 2012] XMMSAS bgd. selection expression = annulus(26578.368200, 31132.520000, 1763.350051, 3526.700101, X, Y) && !ellipse(25577.310000, 32235.432000, 1414.288041, 1414.288041, 0.000000, X, Y) && !ellipse(26626.032410, 27625.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26443.000000, 33574.246735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24706.502000, 36340.737200, 1721.272050, 1721.272050, 0.000000, X, Y) && !ellipse(25925.808258, 35288.182312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24887.357269, 34328.094513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26609.818146, 28236.774963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24909.086000, 34963.562400, 1302.408037, 1302.408037, 0.000000, X, Y) && !ellipse(24749.972200, 34646.092600, 660.808019, 660.808019, 0.000000, X, Y) && !ellipse(25317.961980, 33157.907940, 833.168024, 833.168024, 0.000000, X, Y) && !ellipse(25006.528000, 36027.948000, 1726.784050, 1726.784050, 0.000000, X, Y) && !ellipse(25650.560000, 33866.430800, 1008.720029, 1008.720029, 0.000000, X, Y) && !ellipse(26151.418000, 32541.494000, 1500.096043, 1500.096043, 0.000000, X, Y) && !ellipse(26419.872040, 31624.847229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25987.835052, 31700.815582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26835.206000, 30457.544800, 1369.520039, 1230.584035, 57.301000, X, Y) && !ellipse(26930.458069, 30057.628571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26758.836800, 29717.118000, 1590.560046, 1590.560046, 0.000000, X, Y) && !ellipse(27250.966600, 29344.591000, 659.381619, 659.381619, 0.000000, X, Y) && !ellipse(26419.649017, 29361.864868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26672.942000, 28648.954000, 735.610421, 735.610421, 0.000000, X, Y) && !ellipse(22908.133820, 28901.748291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27627.778000, 28292.784000, 1234.984036, 604.221617, 63.500000, X, Y) && !ellipse(27709.897675, 27449.874725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27019.088257, 27276.493347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29399.802582, 26747.646027, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 20:33:28 2012] Writing fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src107.gif
[Sat Jan  7 00:39:30 2012] Mean detx,y = (-3231.60, 6222.93) 
[Sat Jan  7 00:39:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan  7 00:40:08 2012] Binned source spectrum to 10 counts/bin
[Sat Jan  7 00:40:09 2012] Setting source spectrum file to fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src107_src_b10.pi.gz
[Sat Jan  7 00:40:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src107_bgd.pi.gz
[Sat Jan  7 05:20:52 2012] Updating aperture counts using extracted products
[Sat Jan  7 05:20:52 2012] Error reading totcts from fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src107_src_b10.pi.gz
[Sat Jan  7 05:20:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan  7 05:20:56 2012] Using photon index=1.80, rate=0.208, arf fullrun_pn_xmm0601781301_pi300-10000_pass1_cl_src107.arf
[Sat Jan  7 05:20:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan  7 05:20:56 2012] Updating source flux to 7.2e-13
[Sat Jan  7 05:21:13 2012] Flag b found in src. 107 procflags, skipping spectral fitting
[Sat Jan  7 05:21:13 2012] Flag c found in src. 107 procflags, skipping spectral fitting