[Thu Mar 29 09:04:34 2012] Detection parameters:
  Position = (290.9, 276.8) = 13 35 48.26 2 59 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5313.8 +/- 86.8
  Background counts = 11.2
  Rate = 0.3 +/- 0.005

[Thu Mar 29 09:04:34 2012] Off-axis axis estimate = 1.66'
[Thu Mar 29 10:50:00 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 10:50:00 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Mar 29 10:50:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Mar 29 10:50:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Mar 29 11:45:21 2012] fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 29 11:45:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 11:45:21 2012] fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 29 11:45:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 11:45:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:45:21 2012] fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 29 11:45:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Mar 29 11:45:21 2012] fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 29 11:45:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Mar 29 11:45:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:45:42 2012] Warning, spatial fit 1 centroid is now closest to src. 14
[Thu Mar 29 11:45:42 2012] Source 2 is offset by -4.645780 and -0.976912 pixels which is larger than
2 X fitted extent = 3.363927 x 3.363927, not incorporating fit results
[Thu Mar 29 11:45:42 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 11:45:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 11:45:42 2012] Assessing source extent using major
[Thu Mar 29 11:45:42 2012] Source does appear to be extended
[Thu Mar 29 11:45:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 13:32:12 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 13:32:12 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Mar 29 13:32:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Mar 29 13:32:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26"
[Thu Mar 29 14:20:31 2012] fullrun_mos2_xmm0601781201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 29 14:20:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781201_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 14:20:31 2012] fullrun_mos2_xmm0601781201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 29 14:20:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781201_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 14:20:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 14:20:31 2012] fullrun_mos2_xmm0601781201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 29 14:20:31 2012] fullrun_mos2_xmm0601781201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 29 14:20:31 2012] Fit fullrun_mos2_xmm0601781201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 29 14:20:52 2012] Spatial fit model total counts = 4900.060000, observed total counts = 4729.000000
[Thu Mar 29 14:20:52 2012] Offset between fit and detection position for source 2 = 0.170114 pixels
[Thu Mar 29 14:20:52 2012] 4876.850000 total counts/ 1272.870000 bgd. counts: snr = 101.016042
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.170114 pixels
  Position = (291.0, 276.7) = 13 35 48.24 2 59 56.3
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 3604.0 +/- 69.8
  Background counts = 1272.9
  Rate = 0.2 +/- 0.004
[Thu Mar 29 14:20:52 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 14:20:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 14:20:52 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 14:20:52 2012] Source does appear to be extended
[Thu Mar 29 14:20:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 15:24:00 2012] Counts = 3603.980000, rescaling region sizes by 2.000000
[Thu Mar 29 15:24:00 2012] XMMSAS src. selection expression = ellipse(25266.382860, 24020.182000, 640.417218, 640.417218, 0.000000, X, Y)
[Thu Mar 29 15:24:00 2012] Writing source region out to fullrun_mos2_xmm0601781201_pi300-10000_pass1_cl_src2_src.reg
[Thu Mar 29 15:24:00 2012] Extracting stamp from image fullrun_mos2_xmm0601781201_pi300-10000_cl_sm2.00.img.gz, (254, 240) - (328, 313)
[Thu Mar 29 15:24:00 2012] XMMSAS bgd. selection expression = annulus(25266.382860, 24020.182000, 2134.724061, 4269.448123, X, Y) && !ellipse(26237.474182, 24495.655487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20742.018875, 29001.226929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24473.281555, 25360.865814, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 15:24:00 2012] Writing fullrun_mos2_xmm0601781201_pi300-10000_pass1_cl_src2.gif
[Thu Mar 29 15:24:05 2012] Mean detx,y = (19.36, -11.62) 
[Thu Mar 29 15:24:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 15:24:29 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 15:24:29 2012] Setting source spectrum file to fullrun_mos2_xmm0601781201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 29 15:24:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601781201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Mar 29 15:43:16 2012] Updating aperture counts using extracted products
[Thu Mar 29 15:43:16 2012] Error reading totcts from fullrun_mos2_xmm0601781201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 29 15:43:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 15:43:17 2012] Using photon index=1.80, rate=0.205, arf fullrun_mos2_xmm0601781201_pi300-10000_pass1_cl_src2.arf
[Thu Mar 29 15:43:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 15:43:17 2012] Updating source flux to 2.2e-12
[Thu Mar 29 15:43:57 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Thu Mar 29 15:44:36 2012] Reading fit data from xmm0601781201/analysis//spectral/fullrun_mos2_xmm0601781201_pi300-10000_pass1_cl_src2_pl.csv
[Thu Mar 29 15:44:36 2012] Spectral fit parameter nH value = 2.05033e+22
[Thu Mar 29 15:44:36 2012] Spectral fit parameter PhoIndex value = 1.46616
[Thu Mar 29 15:44:36 2012] Failed to get F(0.3-8.0) from xmm0601781201/analysis//spectral/fullrun_mos2_xmm0601781201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Mar 29 15:44:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 15:44:36 2012] Using Nh = 2.1e+22, photon index=1.47, rate=0.205, arf fullrun_mos2_xmm0601781201_pi300-10000_pass1_cl_src2.arf
[Thu Mar 29 15:44:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 15:44:36 2012] Updating source flux to 5e-12