[Tue Jun 18 01:26:16 2013] Detection parameters:
  Position = (211.4, 379.1) = 12 23 50.80 2 44 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 371.0 +/- 24.0
  Background counts = 15.3
  Rate = 0.04 +/- 0.002

[Tue Jun 18 01:26:18 2013] Off-axis axis estimate = 8.60'
[Tue Jun 18 01:28:41 2013] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 01:28:41 2013] Initial guess for spatial extent in simple fitting = 10.73"
[Tue Jun 18 01:28:41 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.022
[Tue Jun 18 01:28:41 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.73"
[Tue Jun 18 05:17:09 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 18 05:17:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_src3.csv
[Tue Jun 18 05:17:09 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 18 05:17:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_src3.csv
[Tue Jun 18 05:17:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 05:17:10 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 18 05:17:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 18 05:17:10 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 18 05:17:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 18 05:17:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 06:50:12 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.140078 pixels away
[Tue Jun 18 06:50:12 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 06:50:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 06:50:12 2013] Assessing source extent using major
[Tue Jun 18 06:50:12 2013] Source does appear to be extended
[Tue Jun 18 06:50:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 06:50:36 2013] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 06:50:36 2013] Initial guess for spatial extent in simple fitting = 10.73"
[Tue Jun 18 06:50:36 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.022
[Tue Jun 18 06:50:36 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.73"
[Tue Jun 18 10:25:31 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 18 10:25:31 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 18 10:25:31 2013] Fit fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Jun 18 10:25:31 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 18 10:25:31 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 18 10:25:31 2013] Fit fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jun 18 11:22:21 2013] Spatial fit model total counts = 463.108000, observed total counts = 436.000000
[Tue Jun 18 11:22:21 2013] Offset between fit and detection position for source 3 = 0.111856 pixels
[Tue Jun 18 11:22:21 2013] 458.973000 total counts/ 222.985000 bgd. counts: snr = 15.803457
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.111856 pixels
  Position = (211.3, 379.1) = 12 23 50.83 2 44 58.1
  Extent = 6.2 (5.5-7.0)" x 4.3 (3.7-5.0)", rotation angle = 311 (296-327) degrees
  Source counts = 236.0 +/- 21.4
  Background counts = 223.0
  Rate = 0.02 +/- 0.002
[Tue Jun 18 11:22:21 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 11:22:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 11:22:21 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 11:22:21 2013] Source does appear to be extended
[Tue Jun 18 11:22:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Tue Jun 18 11:22:32 2013] XMMSAS src. selection expression = ellipse(18331.055600, 32934.912200, 373.321211, 258.118207, 310.993533, X, Y)
[Tue Jun 18 11:22:32 2013] Writing source region out to fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 18 11:22:32 2013] Extracting stamp from image fullrun_pn_xmm0601781001_pi300-10000_cl_sm2.00.img.gz, (190, 358) - (233, 401)
[Tue Jun 18 11:22:32 2013] XMMSAS bgd. selection expression = annulus(18331.055600, 32934.912200, 622.202018, 1244.404036, X, Y)
[Tue Jun 18 11:22:32 2013] Writing fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src3.gif
[Tue Jun 18 11:28:54 2013] Mean detx,y = (-5388.40, -7905.08) 
[Tue Jun 18 11:28:56 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 11:29:09 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 11:29:09 2013] Setting source spectrum file to fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 18 11:29:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 18 13:57:40 2013] Updating aperture counts using extracted products
[Tue Jun 18 13:57:40 2013] Total counts from fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 265.00
[Tue Jun 18 13:57:40 2013] Total counts from fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src3_bgd.pi.gz = 212.00
[Tue Jun 18 13:57:40 2013] Got source and background scale factors 302400.000000, 3107857.000000
[Tue Jun 18 13:57:40 2013] User source parameters:
  Position = (211.3, 379.1) = 12 23 50.83 2 44 58.1
  Extent = 6.2 (5.5-7.0)" x 4.3 (3.7-5.0)", rotation angle = 311 (296-327) degrees
  Source aperture counts = 244.4 +/- 17.3
  Background aperture counts = 20.6
  Rate = 0.03 +/- 0.002

[Tue Jun 18 13:57:51 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 13:57:51 2013] Using photon index=1.80, rate=0.0245, arf fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src3.arf
[Tue Jun 18 13:57:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 13:57:51 2013] Updating source flux to 1.6e-13
[Tue Jun 18 13:58:17 2013] xmm0601781001/analysis//spectral/fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete