[Tue Jun 18 01:26:17 2013] Detection parameters:
  Position = (307.8, 345.9) = 12 23 22.80 2 42 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.3 +/- 14.5
  Background counts = 20.2
  Rate = 0.009 +/- 0.002

[Tue Jun 18 01:26:18 2013] Off-axis axis estimate = 3.51'
[Tue Jun 18 01:28:41 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 01:28:41 2013] Initial guess for spatial extent in simple fitting = 8.18"
[Tue Jun 18 01:28:41 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Tue Jun 18 01:28:41 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.18"
[Tue Jun 18 05:17:09 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_src20.ximg exists
[Tue Jun 18 05:17:09 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Jun 18 05:17:09 2013] Fit fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_src20 appears to have run properly
[Tue Jun 18 05:17:10 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Jun 18 05:17:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jun 18 05:17:10 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Jun 18 05:17:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jun 18 05:17:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 06:50:12 2013] Spatial fit model total counts = 644.867000, observed total counts = 587.000000
[Tue Jun 18 06:50:12 2013] Offset between fit and detection position for source 20 = 0.581913 pixels
[Tue Jun 18 06:50:12 2013] 598.484000 total counts/ 483.391000 bgd. counts: snr = 5.234794
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.581913 pixels
  Position = (307.4, 346.3) = 12 23 22.92 2 42 35.3
  Extent = 16.4 (16.3-32.7)" x 3.1 (2.2-4.1)", rotation angle = 102 (98-105) degrees
  Source counts = 115.1 +/- 24.5
  Background counts = 483.4
  Rate = 0.01 +/- 0.003
[Tue Jun 18 06:50:12 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 06:50:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 06:50:12 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 06:50:12 2013] Source does appear to be extended
[Tue Jun 18 06:50:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.94
[Tue Jun 18 06:50:12 2013] Source is asymmetric
[Tue Jun 18 06:50:12 2013] Source is confused with source 21
[Tue Jun 18 06:50:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 18 06:50:36 2013] Initial guess for spatial extent in simple fitting = 9.74"
[Tue Jun 18 06:50:36 2013] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.833
[Tue Jun 18 06:50:36 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 9.74"
[Tue Jun 18 10:25:31 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jun 18 10:25:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_src15.csv
[Tue Jun 18 10:25:31 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jun 18 10:25:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_src15.csv
[Tue Jun 18 10:25:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 10:25:32 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jun 18 10:25:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue Jun 18 10:25:32 2013] fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jun 18 10:25:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue Jun 18 10:25:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 11:22:21 2013] Spatial fit model total counts = 688.584000, observed total counts = 600.000000
[Tue Jun 18 11:22:21 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 11:22:21 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 11:22:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 11:22:21 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 11:22:21 2013] Source does appear to be extended
[Tue Jun 18 11:22:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.94
[Tue Jun 18 11:22:21 2013] Source is asymmetric
[Tue Jun 18 11:22:32 2013] XMMSAS src. selection expression = ellipse(26694.811800, 30078.940200, 981.768028, 187.414805, 101.618600, X, Y)
[Tue Jun 18 11:22:32 2013] Writing source region out to fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src20_src.reg
[Tue Jun 18 11:22:32 2013] Extracting stamp from image fullrun_pn_xmm0601781001_pi300-10000_cl_sm2.00.img.gz, (251, 290) - (364, 403)
[Tue Jun 18 11:22:32 2013] XMMSAS bgd. selection expression = annulus(26694.811800, 30078.940200, 1636.280047, 3272.560094, X, Y) && !ellipse(26274.537200, 27863.277200, 1486.473643, 1463.990442, 1.763090, X, Y) && !ellipse(31162.478000, 33769.558000, 1239.680036, 1239.680036, 0.000000, X, Y) && !ellipse(24374.886600, 31480.442000, 399.594411, 399.594411, 0.000000, X, Y) && !ellipse(26588.986786, 29558.177734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24993.294400, 29627.819800, 692.632820, 348.587210, 9.586710, X, Y) && !ellipse(26045.950989, 29196.440613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25582.173126, 28984.489624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23974.013916, 29272.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25163.870605, 28777.808868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27879.535461, 26761.324738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27046.549225, 26056.148956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27244.297400, 25485.752000, 1340.584039, 347.569610, 69.370100, X, Y)
[Tue Jun 18 11:22:32 2013] Writing fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src20.gif
[Tue Jun 18 11:37:03 2013] Mean detx,y = (1232.67, -2014.70) 
[Tue Jun 18 11:37:05 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 11:37:29 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 11:37:30 2013] Setting source spectrum file to fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Jun 18 11:37:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Jun 18 13:57:43 2013] Updating aperture counts using extracted products
[Tue Jun 18 13:57:43 2013] Total counts from fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 237.00
[Tue Jun 18 13:57:43 2013] Total counts from fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src20_bgd.pi.gz = 1987.00
[Tue Jun 18 13:57:43 2013] Got source and background scale factors 565740.000000, 14385062.000000
[Tue Jun 18 13:57:43 2013] User source parameters:
  Position = (307.4, 346.3) = 12 23 22.92 2 42 35.3
  Extent = 16.4 (16.3-32.7)" x 3.1 (2.2-4.1)", rotation angle = 102 (98-105) degrees
  Source aperture counts = 158.9 +/- 16.4
  Background aperture counts = 78.1
  Rate = 0.02 +/- 0.002

[Tue Jun 18 13:57:51 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 13:57:51 2013] Using photon index=1.80, rate=0.0119, arf fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src20.arf
[Tue Jun 18 13:57:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 13:57:51 2013] Updating source flux to 4e-14
[Tue Jun 18 13:58:02 2013] Flag p found in src. 20 procflags, skipping spectral fitting
[Tue Jun 18 13:58:02 2013] Flag c found in src. 20 procflags, skipping spectral fitting
[Tue Jun 18 13:58:17 2013] xmm0601781001/analysis//spectral/fullrun_pn_xmm0601781001_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete