[Tue Jun 18 01:27:07 2013] Detection parameters:
  Position = (344.1, 243.5) = 12 23 12.26 2 35 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.0 +/- 13.6
  Background counts = 5.1
  Rate = 0.01 +/- 0.002

[Tue Jun 18 01:27:08 2013] Off-axis axis estimate = 5.18'
[Tue Jun 18 05:37:53 2013] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 05:37:53 2013] Initial guess for spatial extent in simple fitting = 9.02"
[Tue Jun 18 05:37:53 2013] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.680
[Tue Jun 18 05:37:53 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.02"
[Tue Jun 18 06:49:58 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 18 06:49:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src3.csv
[Tue Jun 18 06:49:58 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 18 06:49:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src3.csv
[Tue Jun 18 06:49:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 06:49:59 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 18 06:49:59 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 18 06:49:59 2013] Fit fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jun 18 06:50:22 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.177103 pixels away
[Tue Jun 18 06:50:22 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 06:50:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 06:50:22 2013] Assessing source extent using major
[Tue Jun 18 06:50:22 2013] Source does appear to be extended
[Tue Jun 18 06:50:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 10:37:02 2013] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 10:37:02 2013] Initial guess for spatial extent in simple fitting = 9.02"
[Tue Jun 18 10:37:02 2013] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.680
[Tue Jun 18 10:37:02 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 9.02"
[Tue Jun 18 11:22:10 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 18 11:22:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src3.csv
[Tue Jun 18 11:22:10 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 18 11:22:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src3.csv
[Tue Jun 18 11:22:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 11:22:11 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 18 11:22:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 18 11:22:11 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 18 11:22:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 18 11:22:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 11:22:24 2013] Source 4 is offset by 4.392921 and -8.819655 pixels which is larger than
2 X fitted extent = 1.036662 x 1.036662, not incorporating fit results
[Tue Jun 18 11:22:24 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 11:22:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 11:22:24 2013] Assessing source extent using major
[Tue Jun 18 11:22:24 2013] Source does appear to be extended
[Tue Jun 18 11:22:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 13:40:42 2013] XMMSAS src. selection expression = ellipse(29888.450104, 21133.706055, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 13:40:42 2013] Writing source region out to fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src4_src.reg
[Tue Jun 18 13:40:42 2013] Extracting stamp from image fullrun_mos2_xmm0601781001_pi300-10000_cl_sm2.00.img.gz, (307, 206) - (382, 281)
[Tue Jun 18 13:40:42 2013] XMMSAS bgd. selection expression = annulus(29888.450104, 21133.706055, 1087.500000, 2175.000000, X, Y)
[Tue Jun 18 13:40:42 2013] Writing fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src4.gif
[Tue Jun 18 13:46:32 2013] Mean detx,y = (-685.80, -7604.12) 
[Tue Jun 18 13:46:33 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 13:47:00 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 13:47:00 2013] Setting source spectrum file to fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jun 18 13:47:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jun 18 13:56:14 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 13:56:14 2013] rmf not generated due to insufficient counts
[Tue Jun 18 13:57:54 2013] Updating aperture counts using extracted products
[Tue Jun 18 13:57:54 2013] Total counts from fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 117.00
[Tue Jun 18 13:57:54 2013] Total counts from fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src4_bgd.pi.gz = 282.00
[Tue Jun 18 13:57:55 2013] Got source and background scale factors 1216406.000000, 9796372.000000
[Tue Jun 18 13:57:55 2013] User source parameters:
  Position = (344.1, 243.5) = 12 23 12.26 2 35 2.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 82.0 +/- 11.9
  Background aperture counts = 35.0
  Rate = 0.007 +/- 0.001

[Tue Jun 18 13:57:55 2013] Updating counts from extracted products
[Tue Jun 18 13:57:55 2013] Set source signif. to 81.98/5.92 = 13.85
[Tue Jun 18 13:57:56 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 13:57:56 2013] Using photon index=1.80, rate=0.00706, arf fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src4.arf
[Tue Jun 18 13:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 13:57:56 2013] Updating source flux to 1e-13
[Tue Jun 18 13:58:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 13:58:02 2013] xmm0601781001/analysis//spectral/fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete