[Tue Jun 18 01:27:08 2013] Detection parameters:
  Position = (326.5, 304.4) = 12 23 17.36 2 39 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.8 +/- 8.8
  Background counts = 7.8
  Rate = 0.003 +/- 0.0008

[Tue Jun 18 01:27:08 2013] Off-axis axis estimate = 2.08'
[Tue Jun 18 05:37:53 2013] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 05:37:53 2013] Initial guess for spatial extent in simple fitting = 7.47"
[Tue Jun 18 05:37:53 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.272
[Tue Jun 18 05:37:53 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 7.47"
[Tue Jun 18 06:49:59 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src20.ximg exists
[Tue Jun 18 06:49:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src20.csv
[Tue Jun 18 06:49:59 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Jun 18 06:49:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src20.csv
[Tue Jun 18 06:49:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 06:49:59 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Jun 18 06:49:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jun 18 06:49:59 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Jun 18 06:49:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jun 18 06:49:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 06:50:22 2013] Source 19 is offset by -5.197444 and 4.953021 pixels which is larger than
2 X fitted extent = 3.535573 x 3.535573, not incorporating fit results
[Tue Jun 18 06:50:22 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 06:50:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 06:50:22 2013] Assessing source extent using major
[Tue Jun 18 06:50:22 2013] Source does appear to be extended
[Tue Jun 18 06:50:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 06:50:22 2013] Deleting source due to low Poisson probability 0.8