[Tue Jun 18 01:27:07 2013] Detection parameters:
  Position = (311.8, 327.1) = 12 23 21.64 2 41 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.3 +/- 16.4
  Background counts = 7.9
  Rate = 0.009 +/- 0.002

[Tue Jun 18 01:27:08 2013] Off-axis axis estimate = 2.29'
[Tue Jun 18 05:37:53 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 05:37:53 2013] Initial guess for spatial extent in simple fitting = 7.57"
[Tue Jun 18 05:37:53 2013] source mask rpix=1.7, npix_max = 20, mask sum = 11, frac = 0.547
[Tue Jun 18 05:37:53 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.57"
[Tue Jun 18 06:49:58 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jun 18 06:49:58 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jun 18 06:49:58 2013] Fit fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_src7 appears to have run properly
[Tue Jun 18 06:49:59 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jun 18 06:49:59 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jun 18 06:49:59 2013] Fit fullrun_mos2_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jun 18 06:50:22 2013] Source 13 is offset by 8.896764 and 1.199926 pixels which is larger than
2 X fitted extent = 4.608644 x 2.734745, not incorporating fit results
[Tue Jun 18 06:50:22 2013] Source 13 is offset by 6.759523 and 6.062684 pixels which is larger than
2 X fitted extent = 1.880874 x 2.308552, not incorporating fit results
[Tue Jun 18 06:50:22 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 06:50:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 06:50:22 2013] Assessing source extent using major
[Tue Jun 18 06:50:22 2013] Source does appear to be extended
[Tue Jun 18 06:50:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 06:50:22 2013] Source is confused with source 15
[Tue Jun 18 10:37:02 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 10:37:02 2013] Initial guess for spatial extent in simple fitting = 7.57"
[Tue Jun 18 10:37:02 2013] source mask rpix=1.7, npix_max = 20, mask sum = 11, frac = 0.547
[Tue Jun 18 10:37:02 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 7.57"
[Tue Jun 18 11:22:10 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jun 18 11:22:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src7.csv
[Tue Jun 18 11:22:10 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jun 18 11:22:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src7.csv
[Tue Jun 18 11:22:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 11:22:11 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jun 18 11:22:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Jun 18 11:22:11 2013] fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jun 18 11:22:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Jun 18 11:22:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 11:22:24 2013] Source 13 is offset by 8.896764 and 1.199926 pixels which is larger than
2 X fitted extent = 4.558133 x 2.736037, not incorporating fit results
[Tue Jun 18 11:22:24 2013] Source 13 is offset by 6.759523 and 6.062684 pixels which is larger than
2 X fitted extent = 2.368556 x 2.368556, not incorporating fit results
[Tue Jun 18 11:22:24 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 11:22:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 11:22:24 2013] Assessing source extent using major
[Tue Jun 18 11:22:24 2013] Source does appear to be extended
[Tue Jun 18 11:22:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 13:40:42 2013] XMMSAS src. selection expression = ellipse(27077.594482, 28408.969543, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 13:40:42 2013] Writing source region out to fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src13_src.reg
[Tue Jun 18 13:40:42 2013] Extracting stamp from image fullrun_mos2_xmm0601781001_pi300-10000_cl_sm2.00.img.gz, (274, 290) - (349, 365)
[Tue Jun 18 13:40:42 2013] XMMSAS bgd. selection expression = annulus(27077.594482, 28408.969543, 1087.500000, 2175.000000, X, Y) && !ellipse(26266.240000, 27852.831000, 1607.680846, 1428.134441, 339.398500, X, Y) && !ellipse(27368.864471, 28059.137573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.205505, 28861.248474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27712.186310, 27473.480591, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 13:40:42 2013] Writing fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src13.gif
[Tue Jun 18 13:48:20 2013] Mean detx,y = (-554.16, 189.85) 
[Tue Jun 18 13:48:21 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 13:48:30 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 13:48:30 2013] Setting source spectrum file to fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jun 18 13:48:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Jun 18 13:56:51 2013] Not generating rmf since there are only 87 counts
[Tue Jun 18 13:56:51 2013] rmf not generated due to insufficient counts
[Tue Jun 18 13:57:55 2013] Updating aperture counts using extracted products
[Tue Jun 18 13:57:55 2013] Total counts from fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 1286.00
[Tue Jun 18 13:57:55 2013] Total counts from fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src13_bgd.pi.gz = 505.00
[Tue Jun 18 13:57:55 2013] Got source and background scale factors 1153828.000000, 5673668.000000
[Tue Jun 18 13:57:55 2013] User source parameters:
  Position = (311.8, 327.1) = 12 23 21.64 2 41 11.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1183.3 +/- 36.9
  Background aperture counts = 102.7
  Rate = 0.1 +/- 0.003

[Tue Jun 18 13:57:55 2013] Updating counts from extracted products
[Tue Jun 18 13:57:55 2013] Set source signif. to 1183.30/10.13 = 116.76
[Tue Jun 18 13:57:56 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 13:57:56 2013] Using photon index=1.80, rate=0.102, arf fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src13.arf
[Tue Jun 18 13:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 13:57:56 2013] Updating source flux to 1.1e-12
[Tue Jun 18 13:58:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 13:58:02 2013] xmm0601781001/analysis//spectral/fullrun_mos2_xmm0601781001_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete