[Tue Jun 18 01:26:41 2013] Detection parameters:
  Position = (360.4, 392.4) = 12 23 7.54 2 45 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.4 +/- 12.3
  Background counts = 5.5
  Rate = 0.01 +/- 0.002

[Tue Jun 18 01:26:41 2013] Off-axis axis estimate = 8.16'
[Tue Jun 18 05:17:11 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 05:17:11 2013] Initial guess for spatial extent in simple fitting = 10.51"
[Tue Jun 18 05:17:11 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.618
[Tue Jun 18 05:17:11 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.51"
[Tue Jun 18 05:37:53 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jun 18 05:37:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_src5.csv
[Tue Jun 18 05:37:53 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jun 18 05:37:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_src5.csv
[Tue Jun 18 05:37:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 05:37:53 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jun 18 05:37:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jun 18 05:37:53 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jun 18 05:37:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jun 18 05:37:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 06:50:16 2013] Source 6 is offset by -1.116521 and -2.571406 pixels which is larger than
2 X fitted extent = 9.898023 x 1.934437, not incorporating fit results
[Tue Jun 18 06:50:16 2013] Spatial fit model total counts = 96.915300, observed total counts = 223.000000
[Tue Jun 18 06:50:16 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 06:50:16 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 06:50:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 06:50:16 2013] Assessing source extent using major
[Tue Jun 18 06:50:16 2013] Source does appear to be extended
[Tue Jun 18 06:50:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 06:50:16 2013] Source is confused with source 5
[Tue Jun 18 10:25:32 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 10:25:32 2013] Initial guess for spatial extent in simple fitting = 10.51"
[Tue Jun 18 10:25:32 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.618
[Tue Jun 18 10:25:32 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 10.51"
[Tue Jun 18 10:37:01 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jun 18 10:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_src5.csv
[Tue Jun 18 10:37:01 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jun 18 10:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_src5.csv
[Tue Jun 18 10:37:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 10:37:02 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jun 18 10:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jun 18 10:37:02 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jun 18 10:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jun 18 10:37:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 11:22:22 2013] Spatial fit model total counts = 241.848000, observed total counts = 227.000000
[Tue Jun 18 11:22:22 2013] Offset between fit and detection position for source 6 = 2.700678 pixels
[Tue Jun 18 11:22:22 2013] Warning, changing simple spatial fit ID from 5 to 3
[Tue Jun 18 11:22:22 2013] 238.498300 total counts/ 88.896300 bgd. counts: snr = 15.867027
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.700678 pixels
  Position = (361.4, 394.9) = 12 23 7.23 2 46 6.7
  Extent = 21.5 (17.1-43.1)" x 4.3 (3.3-5.4)", rotation angle = 118 (114-122) degrees
  Source counts = 149.6 +/- 15.4
  Background counts = 88.9
  Rate = 0.01 +/- 0.001
[Tue Jun 18 11:22:22 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 11:22:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 11:22:22 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 11:22:22 2013] Source does appear to be extended
[Tue Jun 18 11:22:22 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.17
[Tue Jun 18 11:22:22 2013] Source is asymmetric
[Tue Jun 18 13:22:58 2013] XMMSAS src. selection expression = ellipse(31396.626000, 34307.560000, 1291.692037, 257.836207, 118.442300, X, Y)
[Tue Jun 18 13:22:58 2013] Writing source region out to fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src6_src.reg
[Tue Jun 18 13:22:58 2013] Extracting stamp from image fullrun_mos1_xmm0601781001_pi300-10000_cl_sm2.00.img.gz, (287, 321) - (436, 469)
[Tue Jun 18 13:22:58 2013] XMMSAS bgd. selection expression = annulus(31396.626000, 34307.560000, 2152.820062, 4305.640124, X, Y) && !ellipse(31588.319336, 34638.432922, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 13:22:58 2013] Writing fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src6.gif
[Tue Jun 18 13:28:56 2013] Mean detx,y = (4307.27, 6837.82) 
[Tue Jun 18 13:28:57 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 13:29:26 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 13:29:26 2013] Setting source spectrum file to fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 18 13:29:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun 18 13:57:53 2013] Updating aperture counts using extracted products
[Tue Jun 18 13:57:53 2013] Total counts from fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 131.00
[Tue Jun 18 13:57:53 2013] Total counts from fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1160.00
[Tue Jun 18 13:57:53 2013] Got source and background scale factors 1048000.000000, 39849152.000000
[Tue Jun 18 13:57:53 2013] User source parameters:
  Position = (361.4, 394.9) = 12 23 7.23 2 46 6.7
  Extent = 21.5 (17.1-43.1)" x 4.3 (3.3-5.4)", rotation angle = 118 (114-122) degrees
  Source aperture counts = 100.5 +/- 12.5
  Background aperture counts = 30.5
  Rate = 0.009 +/- 0.001

[Tue Jun 18 13:57:54 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 13:57:54 2013] Using photon index=1.80, rate=0.0129, arf fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src6.arf
[Tue Jun 18 13:57:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 13:57:54 2013] Updating source flux to 1.8e-13
[Tue Jun 18 13:57:57 2013] Flag b found in src. 6 procflags, skipping spectral fitting
[Tue Jun 18 13:57:57 2013] Flag p found in src. 6 procflags, skipping spectral fitting
[Tue Jun 18 13:57:57 2013] Flag c found in src. 6 procflags, skipping spectral fitting
[Tue Jun 18 13:58:00 2013] xmm0601781001/analysis//spectral/fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete