[Tue Jun 18 01:26:41 2013] Detection parameters:
  Position = (363.6, 398.7) = 12 23 6.59 2 46 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.8 +/- 14.6
  Background counts = 5.3
  Rate = 0.02 +/- 0.002

[Tue Jun 18 01:26:41 2013] Off-axis axis estimate = 8.67'
[Tue Jun 18 05:17:11 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 05:17:11 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 05:17:11 2013] Initial guess for spatial extent in simple fitting = 10.76"
[Tue Jun 18 05:17:11 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.017
[Tue Jun 18 05:17:11 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.76"
[Tue Jun 18 05:37:53 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 18 05:37:53 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 18 05:37:53 2013] Fit fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Jun 18 05:37:53 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 18 05:37:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 18 05:37:53 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 18 05:37:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 18 05:37:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601781001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 06:50:16 2013] Warning, spatial fit 3 centroid is now closest to src. 6
[Tue Jun 18 06:50:16 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 06:50:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 06:50:16 2013] Assessing source extent using major
[Tue Jun 18 06:50:16 2013] Source does appear to be extended
[Tue Jun 18 06:50:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 06:50:16 2013] Source is confused with source 6
[Tue Jun 18 10:25:32 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 10:25:32 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 10:25:32 2013] Initial guess for spatial extent in simple fitting = 10.76"
[Tue Jun 18 10:25:32 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.017
[Tue Jun 18 10:25:32 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.76"
[Tue Jun 18 10:37:01 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 18 10:37:01 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 18 10:37:01 2013] Fit fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Jun 18 10:37:01 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 18 10:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 18 10:37:01 2013] fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 18 10:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 18 10:37:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601781001_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 11:22:22 2013] Warning, spatial fit 3 centroid is now closest to src. 6
[Tue Jun 18 11:22:22 2013] Spatial fit model total counts = 335.331000, observed total counts = 223.000000
[Tue Jun 18 11:22:22 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 11:22:22 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 11:22:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 11:22:22 2013] Assessing source extent using major
[Tue Jun 18 11:22:22 2013] Source does appear to be extended
[Tue Jun 18 11:22:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 13:22:58 2013] XMMSAS src. selection expression = ellipse(31588.319336, 34638.432922, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 13:22:58 2013] Writing source region out to fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src5_src.reg
[Tue Jun 18 13:22:58 2013] Extracting stamp from image fullrun_mos1_xmm0601781001_pi300-10000_cl_sm2.00.img.gz, (326, 361) - (401, 436)
[Tue Jun 18 13:22:58 2013] XMMSAS bgd. selection expression = annulus(31588.319336, 34638.432922, 1087.500000, 2175.000000, X, Y) && !ellipse(31396.626000, 34307.560000, 1722.256050, 343.781610, 118.442300, X, Y)
[Tue Jun 18 13:22:58 2013] Writing fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src5.gif
[Tue Jun 18 13:28:35 2013] Mean detx,y = (4416.98, 7068.48) 
[Tue Jun 18 13:28:36 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 13:28:47 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 13:28:47 2013] Setting source spectrum file to fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jun 18 13:28:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Jun 18 13:33:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 13:33:27 2013] rmf not generated due to insufficient counts
[Tue Jun 18 13:57:53 2013] Updating aperture counts using extracted products
[Tue Jun 18 13:57:53 2013] Total counts from fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 202.00
[Tue Jun 18 13:57:53 2013] Total counts from fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src5_bgd.pi.gz = 271.00
[Tue Jun 18 13:57:53 2013] Got source and background scale factors 1260416.000000, 9245824.000000
[Tue Jun 18 13:57:53 2013] User source parameters:
  Position = (363.6, 398.7) = 12 23 6.59 2 46 23.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 165.1 +/- 15.2
  Background aperture counts = 36.9
  Rate = 0.01 +/- 0.001

[Tue Jun 18 13:57:53 2013] Updating counts from extracted products
[Tue Jun 18 13:57:53 2013] Set source signif. to 165.06/6.08 = 27.16
[Tue Jun 18 13:57:54 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 13:57:54 2013] Using photon index=1.80, rate=0.0142, arf fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src5.arf
[Tue Jun 18 13:57:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 13:57:54 2013] Updating source flux to 2e-13
[Tue Jun 18 13:57:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 13:58:00 2013] xmm0601781001/analysis//spectral/fullrun_mos1_xmm0601781001_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete