[Fri Jul 27 07:15:46 2012] Detection parameters:
  Position = (333.5, 404.2) = 12 10 32.63 38 26 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.8 +/- 11.3
  Background counts = 20.8
  Rate = 0.007 +/- 0.001

[Fri Jul 27 07:15:46 2012] Off-axis axis estimate = 8.08'
[Fri Jul 27 07:36:36 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 07:36:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 07:36:36 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Fri Jul 27 07:36:36 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.888
[Fri Jul 27 07:36:36 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.47"
[Fri Jul 27 07:47:46 2012] fullrun_mos2_xmm0601780901_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jul 27 07:47:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780901_pi300-10000_cl_pass0_src4.csv
[Fri Jul 27 07:47:46 2012] fullrun_mos2_xmm0601780901_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jul 27 07:47:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780901_pi300-10000_cl_pass0_src4.csv
[Fri Jul 27 07:47:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 07:47:46 2012] fullrun_mos2_xmm0601780901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul 27 07:47:46 2012] fullrun_mos2_xmm0601780901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul 27 07:47:46 2012] Fit fullrun_mos2_xmm0601780901_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jul 27 07:47:51 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.373567 pixels away
[Fri Jul 27 07:47:51 2012] Spatial fit model total counts = 427.707000, observed total counts = 422.000000
[Fri Jul 27 07:47:51 2012] Offset between fit and detection position for source 3 = 9.138589 pixels
[Fri Jul 27 07:47:51 2012] 430.182000 total counts/ 268.216000 bgd. counts: snr = 9.889664
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 9.138589 pixels
  Position = (326.5, 410.0) = 12 10 35.22 38 26 32.9
  Extent = 20.9 (20.9-41.9)", rotation angle = 0
  Source counts = 162.0 +/- 20.7
  Background counts = 268.2
  Rate = 0.02 +/- 0.002
[Fri Jul 27 07:47:51 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 07:47:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 07:47:51 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 07:47:51 2012] Source does appear to be extended
[Fri Jul 27 07:47:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 08:08:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 08:08:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 08:08:56 2012] Initial guess for spatial extent in simple fitting = 20.93"
[Fri Jul 27 08:08:56 2012] source mask rpix=4.8, npix_max = 112, mask sum = 83, frac = 0.735
[Fri Jul 27 08:08:56 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 20.93"
[Fri Jul 27 08:21:52 2012] fullrun_mos2_xmm0601780901_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jul 27 08:21:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780901_pi300-10000_cl_pass1_src4.csv
[Fri Jul 27 08:21:52 2012] fullrun_mos2_xmm0601780901_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jul 27 08:21:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780901_pi300-10000_cl_pass1_src4.csv
[Fri Jul 27 08:21:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780901_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780901_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 08:21:52 2012] fullrun_mos2_xmm0601780901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul 27 08:21:52 2012] fullrun_mos2_xmm0601780901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul 27 08:21:52 2012] Fit fullrun_mos2_xmm0601780901_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jul 27 08:21:56 2012] Warning, spatial fit 4 centroid is now closest to src. 2
[Fri Jul 27 08:21:56 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 08:21:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 08:21:56 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 08:21:56 2012] Source does appear to be extended
[Fri Jul 27 08:21:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 09:21:13 2012] XMMSAS src. selection expression = ellipse(28358.834000, 35623.938000, 1256.004036, 1256.004036, 0.000000, X, Y)
[Fri Jul 27 09:21:13 2012] Writing source region out to fullrun_mos2_xmm0601780901_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul 27 09:21:13 2012] Extracting stamp from image fullrun_mos2_xmm0601780901_pi300-10000_cl_sm2.00.img.gz, (254, 338) - (399, 482)
[Fri Jul 27 09:21:13 2012] XMMSAS bgd. selection expression = annulus(28358.834000, 35623.938000, 2093.340060, 4186.680120, X, Y) && !ellipse(29464.254000, 34777.924000, 418.668012, 418.668012, 0.000000, X, Y)
[Fri Jul 27 09:21:13 2012] Writing fullrun_mos2_xmm0601780901_pi300-10000_pass1_cl_src3.gif
[Fri Jul 27 09:24:45 2012] Mean detx,y = (-5050.97, 6004.38) 
[Fri Jul 27 09:24:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 09:25:34 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 09:25:34 2012] Setting source spectrum file to fullrun_mos2_xmm0601780901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 09:25:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601780901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul 27 09:34:10 2012] Updating aperture counts using extracted products
[Fri Jul 27 09:34:10 2012] Error reading totcts from fullrun_mos2_xmm0601780901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 09:34:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 09:34:10 2012] Using photon index=1.80, rate=0.0153, arf fullrun_mos2_xmm0601780901_pi300-10000_pass1_cl_src3.arf
[Fri Jul 27 09:34:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 09:34:10 2012] Updating source flux to 2.3e-13