[Wed Oct  5 10:51:01 2011] Detection parameters:
  Position = (308.2, 276.9) = 12 6 22.96 52 42 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1776.8 +/- 51.2
  Background counts = 35.1
  Rate = 0.1 +/- 0.003

[Wed Oct  5 10:51:02 2011] Off-axis axis estimate = 1.72'
[Wed Oct  5 10:54:16 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 10:54:16 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Oct  5 10:54:16 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed Oct  5 10:54:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Oct  5 11:24:30 2011] fullrun_pn_xmm0601780701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Oct  5 11:24:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601780701_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 11:24:30 2011] fullrun_pn_xmm0601780701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Oct  5 11:24:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601780701_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 11:24:30 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601780701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601780701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 11:24:30 2011] fullrun_pn_xmm0601780701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 11:24:30 2011] fullrun_pn_xmm0601780701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 11:24:30 2011] Fit fullrun_pn_xmm0601780701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 11:34:24 2011] Spatial fit model total counts = 1580.000000, observed total counts = 1572.000000
[Wed Oct  5 11:34:24 2011] Offset between fit and detection position for source 1 = 0.188561 pixels
[Wed Oct  5 11:34:24 2011] 1581.799000 total counts/ 573.329000 bgd. counts: snr = 42.117349
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.188561 pixels
  Position = (308.1, 276.7) = 12 6 23.01 52 42 39.6
  Extent = 6.5 (6.1-6.8)", rotation angle = 0
  Source counts = 1008.5 +/- 39.8
  Background counts = 573.3
  Rate = 0.1 +/- 0.005
[Wed Oct  5 11:34:24 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 11:34:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 11:34:24 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 11:34:24 2011] Source does appear to be extended
[Wed Oct  5 11:34:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 11:34:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 11:34:35 2011] Initial guess for spatial extent in simple fitting = 6.47"
[Wed Oct  5 11:34:35 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.013
[Wed Oct  5 11:34:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.47"
[Wed Oct  5 11:59:48 2011] fullrun_pn_xmm0601780701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Oct  5 11:59:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601780701_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 11:59:48 2011] fullrun_pn_xmm0601780701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Oct  5 11:59:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601780701_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 11:59:48 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601780701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601780701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 11:59:48 2011] fullrun_pn_xmm0601780701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 11:59:48 2011] fullrun_pn_xmm0601780701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 11:59:48 2011] Fit fullrun_pn_xmm0601780701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 12:09:50 2011] Spatial fit model total counts = 1561.160000, observed total counts = 1563.000000
[Wed Oct  5 12:09:50 2011] Offset between fit and detection position for source 1 = 0.020532 pixels
[Wed Oct  5 12:09:50 2011] 1569.406000 total counts/ 566.556000 bgd. counts: snr = 42.132241
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.020532 pixels
  Position = (308.1, 276.7) = 12 6 23.01 52 42 39.5
  Extent = 6.4 (6.1-6.7)", rotation angle = 0
  Source counts = 1002.9 +/- 39.6
  Background counts = 566.6
  Rate = 0.1 +/- 0.005
[Wed Oct  5 12:09:50 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 12:09:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 12:09:50 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 12:09:50 2011] Source does appear to be extended
[Wed Oct  5 12:09:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 12:09:57 2011] Counts = 1002.850000, rescaling region sizes by 2.000000
[Wed Oct  5 12:09:57 2011] XMMSAS src. selection expression = ellipse(26754.699960, 24023.721200, 772.507222, 772.507222, 0.000000, X, Y)
[Wed Oct  5 12:09:57 2011] Writing source region out to fullrun_pn_xmm0601780701_pi300-10000_pass1_cl_src1_src.reg
[Wed Oct  5 12:09:57 2011] Extracting stamp from image fullrun_pn_xmm0601780701_pi300-10000_cl_sm2.00.img.gz, (264, 232) - (352, 321)
[Wed Oct  5 12:09:57 2011] XMMSAS bgd. selection expression = annulus(26754.699960, 24023.721200, 2575.024074, 5150.048148, X, Y) && !ellipse(30849.907731, 19058.690889, 488.379253, 403.575528, 113.673671, X, Y) && !ellipse(25943.224200, 24486.915400, 276.924808, 197.632806, 341.046144, X, Y) && !ellipse(29235.574800, 22832.473000, 342.145610, 342.145610, 0.000000, X, Y) && !ellipse(21753.633000, 18688.650000, 437.829613, 275.040008, 50.298336, X, Y)
[Wed Oct  5 12:09:57 2011] Writing fullrun_pn_xmm0601780701_pi300-10000_pass1_cl_src1.gif
[Wed Oct  5 12:10:04 2011] Mean detx,y = (69.48, -246.18) 
[Wed Oct  5 12:10:06 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 12:11:33 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 12:11:33 2011] Setting source spectrum file to fullrun_pn_xmm0601780701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 12:11:33 2011] Setting bgd. spectrum file to fullrun_pn_xmm0601780701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Oct  5 12:44:41 2011] Updating aperture counts using extracted products
[Wed Oct  5 12:44:41 2011] Error reading totcts from fullrun_pn_xmm0601780701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 12:44:42 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 12:44:42 2011] Using photon index=1.80, rate=0.128, arf fullrun_pn_xmm0601780701_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 12:44:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 12:44:42 2011] Updating source flux to 3.2e-13
[Wed Oct  5 12:45:18 2011] Reading fit data from xmm0601780701/analysis//spectral/fullrun_pn_xmm0601780701_pi300-10000_pass1_cl_src1_pl.csv
[Wed Oct  5 12:45:18 2011] Spectral fit parameter nH value = 3.3716e+21
[Wed Oct  5 12:45:18 2011] Spectral fit parameter PhoIndex value = 3.25865
[Wed Oct  5 12:45:18 2011] Failed to get F(0.3-8.0) from xmm0601780701/analysis//spectral/fullrun_pn_xmm0601780701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 12:45:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 12:45:18 2011] Using Nh = 3.4e+21, photon index=3.26, rate=0.128, arf fullrun_pn_xmm0601780701_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 12:45:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 12:45:18 2011] Updating source flux to 2.7e-13