[Thu Dec 29 12:23:30 2011] Detection parameters:
  Position = (205.8, 105.9) = 12 5 12.27 30 58 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 252.3 +/- 21.5
  Background counts = 37.9
  Rate = 0.006 +/- 0.0005

[Thu Dec 29 12:23:31 2011] Off-axis axis estimate = 15.49'
[Thu Dec 29 15:46:46 2011] Using EEF radius (= 14.18 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 15:46:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 29 15:46:46 2011] Initial guess for spatial extent in simple fitting = 14.18"
[Thu Dec 29 15:46:46 2011] source mask rpix=3.3, npix_max = 56, mask sum = 58, frac = 1.026
[Thu Dec 29 15:46:46 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 14.18"
[Thu Dec 29 16:55:10 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_src4.ximg exists
[Thu Dec 29 16:55:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_src4.csv
[Thu Dec 29 16:55:10 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Dec 29 16:55:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_src4.csv
[Thu Dec 29 16:55:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 16:55:10 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Dec 29 16:55:10 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Dec 29 16:55:10 2011] Fit fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Dec 29 16:55:41 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.106932 pixels away
[Thu Dec 29 16:55:41 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 16:55:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 16:55:41 2011] Assessing source extent using major
[Thu Dec 29 16:55:41 2011] Source does appear to be extended
[Thu Dec 29 16:55:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 20:17:13 2011] Using EEF radius (= 14.18 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 20:17:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 29 20:17:13 2011] Initial guess for spatial extent in simple fitting = 14.18"
[Thu Dec 29 20:17:13 2011] source mask rpix=3.3, npix_max = 56, mask sum = 58, frac = 1.026
[Thu Dec 29 20:17:13 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 14.18"
[Thu Dec 29 21:15:59 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_src4.ximg exists
[Thu Dec 29 21:15:59 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Dec 29 21:15:59 2011] Fit fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Dec 29 21:16:00 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Dec 29 21:16:00 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Dec 29 21:16:00 2011] Fit fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Dec 29 21:16:32 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 18.698080 pixels away
[Thu Dec 29 21:16:32 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 21:16:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 21:16:32 2011] Assessing source extent using major
[Thu Dec 29 21:16:32 2011] Source does appear to be extended
[Thu Dec 29 21:16:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 00:14:34 2011] XMMSAS src. selection expression = ellipse(17855.394028, 9160.604523, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 00:14:34 2011] Writing source region out to fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src9_src.reg
[Fri Dec 30 00:14:34 2011] Extracting stamp from image fullrun_mos2_xmm0601780601_pi300-10000_cl_sm2.00.img.gz, (168, 68) - (243, 143)
[Fri Dec 30 00:14:34 2011] XMMSAS bgd. selection expression = annulus(17855.394028, 9160.604523, 1087.500000, 2175.000000, X, Y) && !ellipse(20643.324799, 9011.631493, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 00:14:34 2011] Writing fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src9.gif
[Fri Dec 30 00:16:46 2011] Mean detx,y = (-11645.73, 11742.22) 
[Fri Dec 30 00:16:48 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 00:17:15 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 00:17:16 2011] Setting source spectrum file to fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Dec 30 00:17:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Dec 30 00:46:15 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 00:46:15 2011] rmf not generated due to insufficient counts
[Fri Dec 30 00:56:55 2011] Updating aperture counts using extracted products
[Fri Dec 30 00:56:55 2011] Error reading totcts from fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Dec 30 00:56:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 00:56:56 2011] Using photon index=1.80, rate=0.00643, arf fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src9.arf
[Fri Dec 30 00:56:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 00:56:56 2011] Updating source flux to 2.1e-13
[Fri Dec 30 00:58:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting