[Thu Dec 29 12:23:29 2011] Detection parameters:
  Position = (291.0, 276.2) = 12 4 43.45 31 10 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4020.4 +/- 76.0
  Background counts = 56.7
  Rate = 0.1 +/- 0.002

[Thu Dec 29 12:23:31 2011] Off-axis axis estimate = 1.70'
[Thu Dec 29 15:46:46 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 15:46:46 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Dec 29 15:46:46 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Dec 29 15:46:46 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Dec 29 16:55:10 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec 29 16:55:10 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec 29 16:55:10 2011] Fit fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Dec 29 16:55:10 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec 29 16:55:10 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec 29 16:55:10 2011] Fit fullrun_mos2_xmm0601780601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec 29 16:55:41 2011] Spatial fit model total counts = 3349.000000, observed total counts = 3349.000000
[Thu Dec 29 16:55:41 2011] Offset between fit and detection position for source 1 = 0.162196 pixels
[Thu Dec 29 16:55:41 2011] 3365.156000 total counts/ 758.176000 bgd. counts: snr = 94.678787
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.162196 pixels
  Position = (291.1, 276.4) = 12 4 43.44 31 10 38.7
  Extent = 5.8" x 5.2", rotation angle = 352
  Source counts = 2607.0 +/- 58.0
  Background counts = 758.2
  Rate = 0.08 +/- 0.002
[Thu Dec 29 16:55:41 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 16:55:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 16:55:41 2011] Assessing source extent using major
[Thu Dec 29 16:55:41 2011] Source does appear to be extended
[Thu Dec 29 16:55:41 2011] Computing asymmetry using major and minor axis, asym = 1.13
[Thu Dec 29 20:17:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 29 20:17:13 2011] Initial guess for spatial extent in simple fitting = 5.49"
[Thu Dec 29 20:17:13 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.965
[Thu Dec 29 20:17:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.49"
[Thu Dec 29 21:15:59 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec 29 21:15:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_src1.csv
[Thu Dec 29 21:15:59 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec 29 21:15:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_src1.csv
[Thu Dec 29 21:15:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 21:15:59 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec 29 21:15:59 2011] fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec 29 21:15:59 2011] Fit fullrun_mos2_xmm0601780601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec 29 21:16:32 2011] Spatial fit model total counts = 3355.720000, observed total counts = 3349.000000
[Thu Dec 29 21:16:32 2011] Offset between fit and detection position for source 1 = 0.011724 pixels
[Thu Dec 29 21:16:32 2011] 3372.606000 total counts/ 756.546000 bgd. counts: snr = 95.110843
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011724 pixels
  Position = (291.1, 276.4) = 12 4 43.44 31 10 38.6
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2616.1 +/- 58.1
  Background counts = 756.5
  Rate = 0.08 +/- 0.002
[Thu Dec 29 21:16:32 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 21:16:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 21:16:32 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 21:16:32 2011] Source does appear to be extended
[Thu Dec 29 21:16:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 00:14:34 2011] Counts = 2616.060000, rescaling region sizes by 2.000000
[Fri Dec 30 00:14:34 2011] XMMSAS src. selection expression = ellipse(25273.843200, 23994.053800, 661.431619, 661.431619, 0.000000, X, Y)
[Fri Dec 30 00:14:34 2011] Writing source region out to fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 30 00:14:34 2011] Extracting stamp from image fullrun_mos2_xmm0601780601_pi300-10000_cl_sm2.00.img.gz, (253, 238) - (329, 314)
[Fri Dec 30 00:14:34 2011] XMMSAS bgd. selection expression = annulus(25273.843200, 23994.053800, 2204.772063, 4409.544127, X, Y) && !ellipse(29837.567000, 27336.592000, 687.062420, 687.062420, 0.000000, X, Y) && !ellipse(24456.286713, 24908.470062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28520.491000, 26361.252200, 348.106410, 348.106410, 0.000000, X, Y) && !ellipse(30559.942000, 28253.002000, 1337.520038, 1337.520038, 0.000000, X, Y) && !ellipse(26841.308800, 28173.391000, 290.711208, 290.711208, 0.000000, X, Y) && !ellipse(23737.168200, 22997.618000, 332.858410, 332.858410, 0.000000, X, Y)
[Fri Dec 30 00:14:34 2011] Writing fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src1.gif
[Fri Dec 30 00:14:39 2011] Mean detx,y = (-11.79, 1.56) 
[Fri Dec 30 00:14:42 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 00:15:10 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 00:15:10 2011] Setting source spectrum file to fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 30 00:15:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 30 00:56:55 2011] Updating aperture counts using extracted products
[Fri Dec 30 00:56:55 2011] Error reading totcts from fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 30 00:56:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 00:56:56 2011] Using photon index=1.80, rate=0.0774, arf fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src1.arf
[Fri Dec 30 00:56:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 00:56:56 2011] Updating source flux to 8.4e-13
[Fri Dec 30 00:59:03 2011] Reading fit data from xmm0601780601/analysis//spectral/fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src1_pl.csv
[Fri Dec 30 00:59:03 2011] Spectral fit parameter nH value = 473008000000.0
[Fri Dec 30 00:59:03 2011] Spectral fit parameter PhoIndex value = 0.124205
[Fri Dec 30 00:59:03 2011] Failed to get F(0.3-8.0) from xmm0601780601/analysis//spectral/fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Dec 30 00:59:03 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 00:59:03 2011] Using Nh = 4.7e+11, photon index=0.12, rate=0.0774, arf fullrun_mos2_xmm0601780601_pi300-10000_pass1_cl_src1.arf
[Fri Dec 30 00:59:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 00:59:03 2011] Updating source flux to 2e-12