[Mon Jul 23 19:57:14 2012] Detection parameters:
  Position = (299.1, 321.8) = 11 44 29.79 36 53 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5150.8 +/- 86.4
  Background counts = 70.4
  Rate = 0.3 +/- 0.005

[Mon Jul 23 19:57:14 2012] Off-axis axis estimate = 1.70'
[Mon Jul 23 20:10:44 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 20:10:44 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Jul 23 20:10:44 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Mon Jul 23 20:10:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Jul 23 20:14:54 2012] fullrun_mos2_xmm0601780501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 23 20:14:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780501_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 20:14:54 2012] fullrun_mos2_xmm0601780501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 23 20:14:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780501_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 20:14:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 20:14:54 2012] fullrun_mos2_xmm0601780501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 23 20:14:54 2012] fullrun_mos2_xmm0601780501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 23 20:14:54 2012] Fit fullrun_mos2_xmm0601780501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul 23 20:14:58 2012] Spatial fit model total counts = 2145.070000, observed total counts = 2100.000000
[Mon Jul 23 20:14:58 2012] Offset between fit and detection position for source 1 = 0.233614 pixels
[Mon Jul 23 20:14:58 2012] 2146.569000 total counts/ 518.439000 bgd. counts: snr = 71.505632
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.233614 pixels
  Position = (298.9, 321.7) = 11 44 29.86 36 53 7.5
  Extent = 5.4 (5.1-5.6)", rotation angle = 0
  Source counts = 1628.1 +/- 46.3
  Background counts = 518.4
  Rate = 0.2 +/- 0.006
[Mon Jul 23 20:14:58 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 20:14:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 20:14:58 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 20:14:58 2012] Source does appear to be extended
[Mon Jul 23 20:14:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 20:27:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 20:27:19 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Mon Jul 23 20:27:19 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.002
[Mon Jul 23 20:27:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.35"
[Mon Jul 23 20:32:45 2012] fullrun_mos2_xmm0601780501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 20:32:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780501_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 20:32:45 2012] fullrun_mos2_xmm0601780501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 20:32:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780501_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 20:32:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 20:32:45 2012] fullrun_mos2_xmm0601780501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 20:32:45 2012] fullrun_mos2_xmm0601780501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 20:32:45 2012] Fit fullrun_mos2_xmm0601780501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 23 20:32:48 2012] Spatial fit model total counts = 2156.950000, observed total counts = 2113.000000
[Mon Jul 23 20:32:48 2012] Offset between fit and detection position for source 1 = 0.013119 pixels
[Mon Jul 23 20:32:48 2012] 2172.183000 total counts/ 559.983000 bgd. counts: snr = 68.128919
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013119 pixels
  Position = (298.9, 321.7) = 11 44 29.86 36 53 7.4
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 1612.2 +/- 46.6
  Background counts = 560.0
  Rate = 0.2 +/- 0.006
[Mon Jul 23 20:32:48 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 20:32:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 20:32:48 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 20:32:48 2012] Source does appear to be extended
[Mon Jul 23 20:32:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 20:53:18 2012] Counts = 1612.200000, rescaling region sizes by 2.000000
[Mon Jul 23 20:53:18 2012] XMMSAS src. selection expression = ellipse(25955.628200, 27936.366200, 634.498818, 634.498818, 0.000000, X, Y)
[Mon Jul 23 20:53:18 2012] Writing source region out to fullrun_mos2_xmm0601780501_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 23 20:53:18 2012] Extracting stamp from image fullrun_mos2_xmm0601780501_pi300-10000_cl_sm2.00.img.gz, (262, 285) - (335, 358)
[Mon Jul 23 20:53:18 2012] XMMSAS bgd. selection expression = annulus(25955.628200, 27936.366200, 2114.996061, 4229.992122, X, Y)
[Mon Jul 23 20:53:18 2012] Writing fullrun_mos2_xmm0601780501_pi300-10000_pass1_cl_src1.gif
[Mon Jul 23 20:53:19 2012] Mean detx,y = (87.47, 67.95) 
[Mon Jul 23 20:53:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 20:54:19 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 20:54:19 2012] Setting source spectrum file to fullrun_mos2_xmm0601780501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 20:54:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601780501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 23 20:59:05 2012] Updating aperture counts using extracted products
[Mon Jul 23 20:59:05 2012] Error reading totcts from fullrun_mos2_xmm0601780501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 20:59:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 20:59:05 2012] Using photon index=1.80, rate=0.21, arf fullrun_mos2_xmm0601780501_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 20:59:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 20:59:05 2012] Updating source flux to 2.3e-12
[Mon Jul 23 20:59:25 2012] Reading fit data from xmm0601780501/analysis//spectral/fullrun_mos2_xmm0601780501_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 23 20:59:25 2012] Spectral fit parameter nH value = 2.17356e+12
[Mon Jul 23 20:59:25 2012] Spectral fit parameter PhoIndex value = 1.68447
[Mon Jul 23 20:59:25 2012] Failed to get F(0.3-8.0) from xmm0601780501/analysis//spectral/fullrun_mos2_xmm0601780501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 20:59:25 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 20:59:25 2012] Using Nh = 2.2e+12, photon index=1.68, rate=0.21, arf fullrun_mos2_xmm0601780501_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 20:59:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 20:59:26 2012] Updating source flux to 2.4e-12