[Wed Jul  4 06:02:21 2012] Detection parameters:
  Position = (301.8, 322.0) = 11 27 16.38 19 9 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16307.9 +/- 152.2
  Background counts = 25.6
  Rate = 2 +/- 0.02

[Wed Jul  4 06:02:21 2012] Off-axis axis estimate = 1.73'
[Wed Jul  4 06:03:26 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 06:03:26 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jul  4 06:03:26 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Jul  4 06:03:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Jul  4 06:28:13 2012] fullrun_pn_xmm0601780301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul  4 06:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601780301_pi300-10000_cl_pass0_src1.csv
[Wed Jul  4 06:28:13 2012] fullrun_pn_xmm0601780301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul  4 06:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601780301_pi300-10000_cl_pass0_src1.csv
[Wed Jul  4 06:28:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601780301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601780301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 06:28:13 2012] fullrun_pn_xmm0601780301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul  4 06:28:13 2012] fullrun_pn_xmm0601780301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul  4 06:28:13 2012] Fit fullrun_pn_xmm0601780301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul  4 06:58:27 2012] Spatial fit model total counts = 12983.500000, observed total counts = 12845.000000
[Wed Jul  4 06:58:27 2012] Offset between fit and detection position for source 1 = 0.112343 pixels
[Wed Jul  4 06:58:27 2012] 12977.760000 total counts/ 2656.360000 bgd. counts: snr = 200.260429
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.112343 pixels
  Position = (301.7, 322.1) = 11 27 16.41 19 9 20.6
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 10321.4 +/- 113.9
  Background counts = 2656.4
  Rate = 1 +/- 0.01
[Wed Jul  4 06:58:27 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 06:58:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 06:58:27 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 06:58:27 2012] Source does appear to be extended
[Wed Jul  4 06:58:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 06:58:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul  4 06:58:35 2012] Initial guess for spatial extent in simple fitting = 5.89"
[Wed Jul  4 06:58:35 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.163
[Wed Jul  4 06:58:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.89"
[Wed Jul  4 07:19:22 2012] fullrun_pn_xmm0601780301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul  4 07:19:22 2012] fullrun_pn_xmm0601780301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul  4 07:19:22 2012] Fit fullrun_pn_xmm0601780301_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jul  4 07:19:22 2012] fullrun_pn_xmm0601780301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul  4 07:19:22 2012] fullrun_pn_xmm0601780301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul  4 07:19:22 2012] Fit fullrun_pn_xmm0601780301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul  4 07:46:11 2012] Spatial fit model total counts = 12983.400000, observed total counts = 12845.000000
[Wed Jul  4 07:46:11 2012] Offset between fit and detection position for source 1 = 0.000015 pixels
[Wed Jul  4 07:46:11 2012] 12977.690000 total counts/ 2655.690000 bgd. counts: snr = 200.297333
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000015 pixels
  Position = (301.7, 322.1) = 11 27 16.41 19 9 20.6
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 10322.0 +/- 113.9
  Background counts = 2655.7
  Rate = 1 +/- 0.01
[Wed Jul  4 07:46:11 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 07:46:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 07:46:11 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 07:46:11 2012] Source does appear to be extended
[Wed Jul  4 07:46:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 07:46:18 2012] Counts = 10322.000000, rescaling region sizes by 3.000000
[Wed Jul  4 07:46:18 2012] XMMSAS src. selection expression = ellipse(26200.944000, 27972.788800, 1060.628431, 1060.628431, 0.000000, X, Y)
[Wed Jul  4 07:46:18 2012] Writing source region out to fullrun_pn_xmm0601780301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul  4 07:46:18 2012] Extracting stamp from image fullrun_pn_xmm0601780301_pi300-10000_cl_sm2.00.img.gz, (241, 261) - (363, 383)
[Wed Jul  4 07:46:19 2012] XMMSAS bgd. selection expression = annulus(26200.944000, 27972.788800, 5303.142153, 10606.284305, X, Y) && !ellipse(32152.866180, 27968.826752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36297.757202, 25060.972290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16431.202400, 20422.700400, 435.306413, 435.306413, 0.000000, X, Y) && !ellipse(20146.454080, 17139.080000, 457.763213, 457.763213, 0.000000, X, Y) && !ellipse(21605.556534, 33453.936737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35629.074799, 25013.056976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29628.500600, 23120.248600, 442.461613, 442.461613, 0.000000, X, Y) && !ellipse(18520.719147, 30886.929626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26398.984924, 29496.538574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.179596, 28351.421783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23024.740051, 26767.925140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37002.994049, 24106.298096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30249.030849, 23930.008547, 395.561381, 260.368597, 324.836604, X, Y) && !ellipse(28535.999420, 16679.701920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22326.092987, 20058.363434, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul  4 07:46:19 2012] Writing fullrun_pn_xmm0601780301_pi300-10000_pass1_cl_src1.gif
[Wed Jul  4 07:46:26 2012] Mean detx,y = (99.86, -242.12) 
[Wed Jul  4 07:46:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 07:48:54 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 07:48:55 2012] Setting source spectrum file to fullrun_pn_xmm0601780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul  4 07:48:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601780301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul  4 08:44:02 2012] Updating aperture counts using extracted products
[Wed Jul  4 08:44:02 2012] Error reading totcts from fullrun_pn_xmm0601780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul  4 08:44:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 08:44:02 2012] Using photon index=1.80, rate=1.17, arf fullrun_pn_xmm0601780301_pi300-10000_pass1_cl_src1.arf
[Wed Jul  4 08:44:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 08:44:02 2012] Updating source flux to 2.8e-12
[Wed Jul  4 08:44:38 2012] Reading fit data from xmm0601780301/analysis//spectral/fullrun_pn_xmm0601780301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul  4 08:44:38 2012] Spectral fit parameter nH value = 57776200000.0
[Wed Jul  4 08:44:38 2012] Spectral fit parameter PhoIndex value = 1.4306
[Wed Jul  4 08:44:38 2012] Failed to get F(0.3-8.0) from xmm0601780301/analysis//spectral/fullrun_pn_xmm0601780301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul  4 08:44:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 08:44:38 2012] Using Nh = 5.8e+10, photon index=1.43, rate=1.17, arf fullrun_pn_xmm0601780301_pi300-10000_pass1_cl_src1.arf
[Wed Jul  4 08:44:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 08:44:38 2012] Updating source flux to 3.6e-12